Used 5 Axis Machining Center for sale (1,01,802)

Condition: good (used), Year of construction: 2000, 20000 rpm, Pgedpfx Aor Urm Soa Dog tool measurement on table will come, Parts shown by hand not come.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 93,500 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: Fanuc Series 16i MB, workpiece diameter (max.): 32 mm, Approximately €30,000 has been invested since 2017. Pgjdpfx Ajx E U Exja Dsg TECHNICAL DETAILS Travel X: 250 mm Travel Y: 200 mm Travel Z: 300 mm Max. workpiece diameter: 32 mm Spindle speed: 30,000 rpm Spindle taper: HSK-E40 Tool changer: 48 positions MACHINE DETAILS Number of axes: 5 Control: Fanuc Series 16i MB Operating hours: 93,500 h EQUIPMENT - Bar feeder LNS Hydrobar Express 332 - Coolant filtration system - Spindle cooling - Through spindle coolant (IKZ) - Without tool holders and collet chucks

Condition: used, Year of construction: 2004, Clamping area 630 x 500 mm X axis - 630 mm Y axis - 765 mm Z axis - 510 mm A axis - 0,001 deg. (+30/-120 deg.) C axis - 0,001 deg. (360 deg.) Spindle speeds 35-12000 rpm Spindle taper ISO 40 Pgsdpfoxdfiiox Aa Dog Control: Mazatrol 640 M 5X Equipped with: Coolant through spindle (20 bar)

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available Pjdpfx Aex Hllxja Dsgg - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining zones for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with handheld control device - Included: 12 frame clamps, 8 large and 4 medium-sized suction cups Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Condition: good (used), Year of construction: 2004, 5-axis CNC machining center – universal – Manufacturer: DMG Machine model: DMU 160 Control: MillPlus IT Pgjdex Ey N Ajpfx Aa Deg Year of manufacture: 2004 TECHNICAL DATA Travel distances - X-axis (mm): 1,600 - Y-axis (mm): 1,250 - Z-axis (mm): 1,000 - A-axis (swivel head): 0 degrees / 90 degrees - B-axis (rotary table): 360 degrees Spindle: Swivel milling head (H/V) - Internal coolant supply (ICS) (bar): 40 - Max. spindle speed (rpm): 10,000 Tool changer: Double gripper Tool magazine: Rack-type magazine - Tool holder: SK50 - Tool positions: 120 Machine table: Rotary table Pallet system: Rotary pallet changer - Number of pallets: 2 - Pallet size (mm): 1,250 x 1,000 EQUIPMENT FEATURES + Electronic handwheel + Chip conveyor + Coolant spray gun + Rotating viewing window + Operating mode 4 + Air blast through spindle center, selectable via M-function Subject to changes and errors in the technical data and information.

Condition: used, Year of construction: 2008, 5-Axis CNC Machining Center Used machine Year of manufacture: 2008 Condition: Still in production Features and technical specifications: CNC control: Siemens 840 D Max. travel of controlled axes: X = 1800 mm Y = 6590 mm Z = 460 mm A = +- 90 degrees Podpfex Enqzjx Aa Dogg C = +- 270 degrees HSD milling unit with 10 kW, liquid-cooled Stepless speed control up to 24,000 rpm Permanent grease lubrication Tool holder: HSK 63F 1 multi-spindle drilling unit with pneumatic pre-stroke, mounted on the milling unit. 16 individually selectable vertical drilling spindles 1 double horizontal drilling spindle in X-direction, and 1 identical in Y-direction Drill holders: each with 10 mm diameter Note: Maximum workpiece height machinable with drilling unit = 900 mm, referenced to X/Y spindle Milling and drilling units with dust extraction connection 200 mm diameter, each with pneumatic shut-off valve, combined connection to customer's extraction unit, 300 mm diameter Tool changer: 1 drum tool magazine for 5-axis milling unit, 20 slots for tool diameters up to 90 mm or max. 160 mm with sorted placement, max. tool length 160 mm. One saw blade up to max. 300 mm diameter can be stored and changed; this occupies 3 magazine positions. Special tool lengths up to max. 180 mm possible with corresponding reduction of working area. Maximum tool weight 6 kg (incl. HSK holder). Total magazine weight approx. 60 kg. Magazine positioned at the output side of the unit. Machine table: 8 support traverses, manually adjustable along machine length, each traverse with 1 retractable workpiece stop, fixed towards operator. Table surface can be divided into two clamping setups, per station: - 1 length stop, pneumatically adjustable (up/down) - 2 pneumatically adjustable glide rails (up/down) - 1 vacuum clamping circuit Workpiece positioning: 1 Maka laser system Workpiece clamping: 1 vacuum pump 128 m³/h, dry-running, with intermediate tank, 250 liter capacity. 16 vacuum suction cups, 110 mm diameter Suction cup assortment for stair manufacturing incl. touch valve. 1 clamping device for posts/curved components Including chip conveyor Including NC-Hops 5 Wop system Including bumper safety device at front, and fence at side and rear Central lubrication Rated power: 21 kW Fuse protection: 63 A Availability: approx. March 2026 Location: Westerwald

Condition: excellent (used), Year of construction: 2004, operating hours: 60,477 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: Heidenhain iTNC 530, controller model: iTNC 530, workpiece weight (max.): 800 kg, total height: 3,000 mm, total length: 3,500 mm, total width: 2,500 mm, table width: 800 mm, table length: 800 mm, overall weight: 9,600 kg, spindle speed (min.): 18,000 rpm, Year of construction: 2005 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1050 Y-axis travel mm: 710 Z-axis travel mm: 710 B-axis degrees: 103º Feed rates m/min: 30 Rapid traverse m/min: 30 Milling/turning table nc: Number of pallets: 1 Pgodpfxex Arcao Aa Deg Table dimensions mm: Ø800 Max. workpiece weight kg: 800 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 28 (40%) Spindle torque Nm: 121 Tool system Tool holder: SK 40 Tool magazine slots: 32 Tool changer: Pick-up Chip-to-chip time s: 14 Equipment Rigid table with integrated rotary table Swivel head Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Tool measuring arm Internal coolant supply Machine running times Under power: 151446 Spindle Working: 60477 Basic machine dimensions / weight Length mm: 3500 Width mm: 2500 Height mm: 3000 Weight kg: 9600

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degree C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Pedpfxsxva Aho Aa Djgg Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.

Condition: good (used), MIKRON UCP 600 VARIO is a 5‑axis machining center engineered for high precision, accuracy and reliability in complex machining. Table 320×320 mm; travels X600 Y450 Z450; indexing C n x360°; head B -115/+30°. 30‑station tool magazine; tool Ø max 80 mm, length 200 mm, weight 8 kg; spindle nose HSK‑A63. Spindle stepless 0–20,000 rpm, 30 kW, 91 Nm torque. Feed 15,000 mm/min, rapid 22 m/min; power 3x400 V 50 Hz. Machine weight ~7,700 kg; dims L6820×W4800×H2540(2810) mm. Options: paper filtration, water cooler, chip conveyor, EROWA UPC table, electronic handwheel, lamp, status light. 4+5 axis revised 2023. Achieves tight tolerances; suited to automotive, aerospace, medical, watchmaking and machine‑tool sectors. Pgsdpfsxx U U Rjx Aa Djg

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Podpsxx U Nzefx Aa Dogg

Condition: excellent (used), MIKRON HPM 800 U is a 5‑axis machining center for precision, high accuracy and reliability. Table 630×440 mm, 5 T‑slots, table load 800 kg; travels X800 Y800 Z550 mm; A +91/‑121°, C 360°. HSK‑A63, spindle‑nose to table 600 mm; 115 tools, Ø max 80 mm (160 free), tool length 350 mm. Spindle 0–20000 t/min; feed 0–20000 mm/min; rapid 45 m/min; accel. 6 m/s; max feed force 6000 N; 3×400V 50Hz; 55 kW; weight ~15000 kg; size 3505×3100×2980 mm. Accessories: high‑pressure coolant, paper filtration, 2 pallets, touch probe, laser tool preset, chip conveyor. Suited to tight tolerances in automotive, aerospace, medical, watchmaking. Pedpfx Aaoxx U Nnj Dsgg

Condition: used, DMG HSC 55 linear is a 5-axis machining center designed for precision, high accuracy and reliable performance. Travels X 450 mm, Y 650 mm, Z 460 mm; A-axis -10/+110°; tool magazine 120 places; tool Ø max 80 mm, length 250 mm, weight 6 kg; spindle taper HSK 63. Spindle speeds 2–28,000 min⁻¹; spindle power 38/28 kW; supply 3x400 V 50 Hz; total power 70 kVA; machine weight ≈9500 kg; dims L3210×W2930×H2900 mm. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and toolmaking. Pjdpfxoxx U Iwe Aa Degg

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Pgedjt Ac Efepfx Aa Deg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 73136, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 720 mm, nominal power (apparent): 64 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 3,150 mm, total length: 5,605 mm, total width: 4,290 mm, overall weight: 12,600 kg, spindle speed (min.): 15,000 rpm, operating hours of spindle: 21,786 h, number of slots in tool magazine: 46, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (Readout): Control powered on: approx. 112,194 h Machine powered on: approx. 72,272 h Spindle running: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with normal signs of use, technically operational. Inspection under power possible by arrangement. Work Areas Travels: X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur steel Lubrication: Lifetime lubricated Cooling: Water-cooled with corrosion inhibitor Feed Drives Feed motors: AC Rapid traverse / working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1,600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm pitch) Centering bore: Ø 50 H6 Clamping torque: 8,000 Nm Max. mass moment of inertia: 75 kg·m² Table elevation above floor: 1,120 mm Table drive: Direct torque motor Drive torque: 1,600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4,000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: Pedpfxsx Eh Iqj Aa Degg 80 mm (fully loaded) 130 mm (partially loaded) Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Tool change time (vertical): 11 s Coolant / Chip Disposal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed rated power: 75 kW Connection power: 58 kW Connected load: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Required space (L × W × H): 5,605 × 4,290 × 3,150 mm

Condition: excellent (used), Year of construction: 2011, Traverses X Y Z: 762 x 406 x 508, Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Spindle Motor 30Hp HAAS Control, 24 Station ATC, Pgodexwyuaopfx Aa Deg Programmable Coolant nozzle, WIPS, Low Volt light, 2 axis trunnion table 160mm.

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg Pgodpfx Aasxpil Sj Dsg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Swarf Conveyor Coolant Tool Setter Spindle Probe

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, Pgsdpfsxpw Rvsx Aa Dsg BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Haas TR210 5 axis trunnion table

Condition: good (used), Year of construction: 2016, Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, C axis , 360 degrees, Heidenhain TNC530, Spindle Speed 20000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 60 tools, swarf conveyor. Psdpowq A Rgsfx Aa Dsgg

Condition: excellent (used), Year of construction: 2009, operating hours: 12,959 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, total height: 2,450 mm, total width: 2,400 mm, total length: 3,100 mm, table width: 630 mm, table length: 630 mm, table load: 350 kg, overall weight: 6,800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Type: WF 650 5-Axis Simultaneous Machining Center Year of manufacture: 2007 Commissioned: 2009 Condition: Used, very good Machine ON: 46,181 h Pgjdpfxjxwl T Us Aa Djg Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software Package 1 for iTNC 530 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Vertical milling head tilting range: -5° + 95° NC built-in rotary table Ø 630 mm Table load: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 spindles Tools Internal coolant supply: Tool clamp with coolant supply and blow-out device through the spindle. Flow rate 25 l/min at 40 bar Optional water/air through the spindle Paper belt filter Controlled CNC milling head (B-axis) Mounting kit for TS 640 probe head 3D probe with infrared transmission Dimensions LxWxH approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system LxWxH approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine feet – Machine light

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Pjdpewz I Acefx Aa Degg Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: used, Year of construction: 2020, operating hours: 23,000 h, functionality: fully functional, machine/vehicle number: 2630079, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 650 mm, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, controller manufacturer: Siemens, controller model: 840D sl, workpiece diameter (max.): 1,830 mm, workpiece weight (max.): 800 kg, rotational speed (max.): 40 rpm, overall weight: 28,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 17,500 rpm, operating hours of spindle: 11,000 h, distance between spindles: 800 mm, number of spindles: 2, number of slots in tool magazine: 84, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This high-precision twin-spindle machining center from the SW series is designed for maximum productivity in mass production, especially in the automotive and supplier industries. The machine features two symmetrically arranged motor spindles, a twin NC rotary carrier, and two direct drive rotary tables, enabling simultaneous 5-axis machining and parallel metal cutting operations. Equipped with a Siemens 840D sl CNC control, minimum quantity lubrication, high-dynamic feed drives, and an 84-position tool magazine, the system provides dynamic, precise, and energy-efficient machining processes. The compact design and pick-up capable tool system ensure short chip-to-chip times and high machine availability. This machine is ideal for demanding precision machining tasks such as housings, structural components, gear parts, and components made from aluminum, cast iron, and steel in high-volume production. CNC Control SIEMENS 840D SL Electrical connection Supply voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C network Total connected load: 152 kVA Power factor: 0.6 Protection: 250 A gG (5 s) Weight Machine operating weight: 28,000 kg Transport weight: 24,500 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Max. total tool weight: 400 kg Feed Drives Psdsxt D D Rspfx Aa Dsgg Drive type: Three-phase synchronous motors Travel measurement system X/Y/Z: Direct, absolute X1- and X2-Axis Rapid traverse: 120 m/min Max. acceleration: 10 m/s² Kv factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Y-Axis Rapid traverse: 120 m/min Max. acceleration: 11 m/s² Kv factor: 6 Peak force: 20,000 N Continuous force: 10,000 N Positioning accuracy: Tp = 0.008 mm Z1- and Z2-Axis Rapid traverse: 120 m/min Max. acceleration: 20 m/s² Kv factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindles side by side Spindle diameter: 40 mm Tool interface: HSK-A63 Cooling: Liquid-cooled motor spindles Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (nominal torque) Machining Area Spindle distance: 800 mm Traverse paths: - X-axis: 800 mm - Y-axis: 900 mm (optional 1,200 mm) - Z-axis: 650 mm Difference coupled Z axes: < 1.0 mm Difference coupled X axes: < 1.0 mm Workpiece Clamping / Table System Twin rotary carrier (Q axis) with two direct drive NC rotary tables (A/U axes) Swivel time 0–180°: 5.0 s Max. asymmetric load: 1,600 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 800 kg Peak torque: 1,900 Nm Nominal torque: 1,300 Nm Max. table rotation speed: 40 rpm Tool Change Times: Chip-to-chip with n < 10,000 rpm: > 3.0 s Chip-to-chip with n < 17,500 rpm: > 3.15 s Note The system is supplied without product-specific tools, clamping devices or robot grippers.

Condition: used, Year of construction: 2016, CNC MATRIX 2, table 3500 x 800 mm, travels 3000 x 800 x 720 mm, spindle speed 18,000 rpm, 48-tool magazine, through-spindle coolant, central divider for pendulum operation, SANKYO DS50C-R1-2 rotary table, 5 simultaneous axes, chip conveyor. Pgedpfxoxyzhao Aa Deg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 103, travel distance X-axis: 740 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 220 mm, controller model: NUM 1060, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 740 mm Travel Y: 185 mm Travel Z: 220 mm A-axis: 110° C-axis: 360° Tool holder: ISO25 Spindle speed: 50–12,000 rpm Minimum resolution: 0.001 Pjdpfoxtm Nvox Aa Dsgg MACHINE DETAILS Control: NUM 1060 Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,215 x 2,500 x 2,650 mm Machine weight: 3,550 kg EQUIPMENT Various tool holders Operating manual / Electrical schematic

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 106, travel distance X-axis: 740 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 220 mm, controller model: NUM 1060, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 740 mm Travel Y: 185 mm Pjdpfx Aaoxtm H Io Dogg Travel Z: 220 mm A-Axis: 110° C-Axis: 360° Tool holder: ISO 25 Spindle speed: 50–12,000 rpm Minimum resolution: 0.001 MACHINE DETAILS Control: NUM 1060 Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,215 x 2,500 x 2,650 mm Machine weight: 3,550 kg EQUIPMENT Renishaw probing system Various tool holders Operating manual Electrical diagram

Condition: used, Year of construction: 2017, functionality: fully functional, CNC Heidenhain iTNC 640 HSCI TRAVELS X-axis longitudinal travel: 3,000 mm Y-axis cross travel: 2,700 mm Z-axis vertical travel: 1,250 mm Rapid traverse speed: 40 m/min Maximum acceleration: 5 m/s² Distance between columns: 3,700 mm TABLE Worktable dimensions: 2,000 × 3,000 mm Worktable load capacity: 5 tons/m² GLOB 123 BI-ROTARY HEAD Hydraulic clamping of axes C-axis travel: 400° (±200°) A-axis travel: 230° (+120° / -110°) Rotary axis speed: 10 rpm Spindle power–torque: 40 kW – 139 Nm Max spindle speed: 15,000 rpm Tool holder: HSK-A-100 TOOL CHANGER MRT 40/100 Tool capacity: 40 Tool holder: HSK-A-100 Year of construction: 2017 Machine equipped with: • Remote electronic handwheel HR10 • Belt-type chip conveyor along the Y-axis • Low-pressure external coolant system • Air blow through the spindle + external nozzle • External spray-mist tool cooling system • RMP60 probe • NC4 laser tool presetting • Monitronix device for tool-load and head-vibration monitoring • Heidenhain DCM anti-collision software Pgedpfxsx Dm Nqe Aa Djg • Dual balancing pistons for the vertical ram • Electrical cabinet air conditioner • Operation and maintenance manual and CE declaration