Used 5 Axis Milling Machine for sale (91,921)

Year of construction: 2008, condition: as good as new (ex-display), NEVER USED !!! Butt welder machine Wire diameter range - 8,00 mm - 25,00 mm Manufacturer - SMEI ( Italy ) Model - PT/5 Ledpfoptbt Asx Aaaohp Construction year - 2008.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212037, Offer 24328 Technical data: Lhedot St Szjpfx Aaajp - max. working width 2540 mm - max. material thickness at 40 kg / mm² strength 5 mm - Bending angle setting electronically preselectable 0 - 135 ° - automatic sequence control for a complete work process - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - of the bending beam 100 mm - of the lower beam 100 mm - upper beam drive 400 V / 4 kW - Bending beam drive 400 V / 4 kW - man. Backgauge - E-foot switch - Space requirement approx. W 3800 x H 1650 x D 2500 mm - Weight approx. 5500 kg

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg Ledjf Axn Uepfx Aaaohp good condition

Condition: good (used), Year of construction: 2011, For Sale: Konig Industrie Rex I 6/5 rows Lsdpfx Aow Edmfoaashp Range: 33 - 95 grams Year of manufacture: 2011 very well maintained schematics available + hopper with oil system + spreading bands Note: The control cabinet is missing. (New control cabinet price approx. €10,000) However, it is possible to directly connect this Rex to a proofer that has a control cabinet. Transport upon agreement. The head machine is ready for transport. It is possible to assemble this head machine on site for inspection. Viewing possible on location. Price: €35,000 EXW If you have any questions or comments, please do not hesitate to contact us. Kind regards, Leo Holland

Condition: good (used), Year of construction: 1999, Item: LC-8400-CIP-TetraRex Stainless Steel CIP Unit Type SCU/5 Complete unit in one Stainless Steel frame for Cleaning Filling Machine. Used for Tetra Rex Filling machine Complete 3 pieces units Lhjdpfx Aasvdcx Soaep

Condition: good (used), Gear milling cutter, module milling cutter, tooth form milling cutter, module milling head -1x milling cutter from: 650.054.06 A SPAN. < 5 ° EV 4 CO -Diameter: 22 mm Lhodpjb A Srijfx Aaaop -Weight: 0.6 kg

Condition: new, Year of construction: 2025, A laser marker that can operate anything? Indeed! This is the Wattsan UV TT, an ultraviolet marker that works with a variety of materials, including leather, ceramics, glass, rubber, wood, leather, fabric, gems, organic and electrical components. The Wattsan UV TT is suitable for QR-codes, bar-codes, data and time, and any other images. This marker can operate big workpieces; the scanning tripod can be taken off and placed on the deck. Additionally, you may alter the machine's functionality by just switching out the lenses! You can give our managers a call for additional details! Wattsan UV TT machine characteristics: Working area: from 75x75 to 300x300 mm Laser power: 3/5/10/15 W Machine size: 880x420x1000 mm Packing size: 960x500x1100 mm Weight: 82 kg Laser sourse: JPT Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Lsdpfer D Ngtex Aaajhp Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 39654, type of input current: three-phase, There are four identical machines available. All machines have been tested and are ready for operation. If you purchase all four machines, we can agree on a package price. Lsdpfx Aajw Axb Seaohp

Condition: refurbished (used), Year of construction: 2011, operating hours: 11,200 h, functionality: fully functional, machine/vehicle number: 5748, spindle speed (max.): 42,000 rpm, HSC600-5axis, high-speed milling machine Control Heidenhain TNCi530 Travels XxYxZ 650x550x400mm Travels BxC B100+/-, C endless Clamping table diameter 410mm Lhsdpfxsnr Hlbs Aaaep Distance table/spindle nose 600mm Workpiece weight max. 250kg Spindle speed max. 42000rpm Spindle power S1/S2 10/13KW Rapid traverse 50m/min Turning speed B/C 80/80rpm. Equipment: Control Heidenhain TNCi530 HVC 140 Step Tec milling spindle HSK 40-E tool holder Tool changer 60 places Oil mist extraction system for extracting oil vapors L-CUT 1 dust extraction system Renishaw OMP400 measuring system Manual control panel with handwheel and enabling button External minimum quantity lubrication (MMS) Lubrication and tool cooling EROWA UPC chuck Calibration ball for Kinematopt for spatial compensation Services with Trasport, commissioning on site, training Warranty 6 months after handover

Year of construction: 2002, condition: excellent (used), FIDIA K197 CNC Machining Center ​in very good and working condition​.​ Lhedpfx Aasppwnqjasp

Condition: used, Automatic packing machine Manufacturer : MAIR Model : .90.D.5.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Lhodpfx Ajvtp Hboaasp Model: SKE/M/TS-31 J-WILT/4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 3,5 - 10 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/5/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 3,5 – 10 m Rectangular bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 3 Tn

Condition: good (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter Lhjdpsb A Rcgsfx Aaajp -Diameter: 63 mm -Height: 40 mm -Mount: 22 mm -Quantity: 2x milling cutter fixing disc 650.054.06A SPAN. 5° EV4CO -Price: complete -Sale: only complete -Weight: 1.5 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 80709, plate height: 45 mm, empty load weight: 2,900 kg, operating speed: 333 mm/s, Equipment: CE marking, TECHNICAL DETAILS Maximum panel thickness: 45 mm Edge band thickness: 13-60 mm Lhsdoxuqufjpfx Aaaep Maximum edge material thickness in rolls: 3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Working speed: 10 - 20 m/min MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,950 mm x 1,700 mm x 1,530 mm Weight: 2,900 kg EQUIPMENT Glue pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting edge trimming and chamfering unit RI 700 Compact edge scraper RBK501 Brushes SP700 Edge sanding unit LV 700 Heated infeed guide PLC control Panel support guide Large-diameter roll holder Edge cutting device for 3 mm thick rolled edges CE certification

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Working areas X-axis: 3,000 mm Y-axis: 6,000 mm Z-axis: 1,250 mm Ledsxvx U Aepfx Aaajhp Milling head A-axis: controllable, tiltable Milling spindle Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with handwheel Connected load: approx. 25 kW Main fuse: 42 A Dimensions & Weight Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Total weight: 9,600 kg FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 16,722 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,200 rpm, controller model: Heidenhain iTNC 530, Submission of a bid obligates the buyer to collect the machine by the end of this year! TECHNICAL DETAILS Travel X: 4,000 mm Travel Y: 1,200 mm Travel Z: 1,000 mm Maximum spindle speed: 4,200 rpm Tool holder: SK50 DIN 69871 Table load capacity: 10,000 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Operating hours Control unit on-time: 47,181 h Machine on-time: 45,697 h Program running time: 16,722 h Ledpfoxx Uayjx Aaajhp EQUIPMENT 45° diagonal milling head with 2.5° indexing Drum-type tool changer with 24 tool positions (vertical tool change) Machine enclosure: front guard with 2 doors Rear guard with additional door Side slats for machining of extra-long workpieces Longitudinal chip conveyor (discharge on right-hand side) Control cabinet air conditioning Swivel arm for machine control (operation from front and rear)

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 700 mm Lhjdpfx Aaexqrh Eeaep z-travel 600 mm Control Heidenhain Millplus weight of the machine ca. 12,5 t

Condition: excellent (used), Year of construction: 2018, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, controller model: Heidenhein, workpiece height (max.): 620 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 350 kg, Equipment: chip conveyor, documentation/manual, Our 2018 model CMX 70U CNC 5-Axis Machining Center with Heidenhain control, in very good condition, is now available for sale due to excess capacity. We are located in Çayırova, Şekerpınar. The machine is available for on-site inspection. Only serious buyers are requested to contact us. Comes with kinematic set, Renishaw probe, and an integrated tool length measurement device. Lsdpfx Aaexm U E Eoaehp Direct mobile contact. (Whatsapp available)

Year of construction: 2025, condition: new, I have a packaging machine for sale for bulk goods such as flour, sugar, powdered milk, spices, and much more. The packaging capacity is 5-30kg in paper or plastic bags. the price 13 500 EUR including 1- screw feeder 2- packing machine 5-30kg - Power supply: 2.5kW 400V 50Hz - Packaging accuracy: +/- 1% - Packaging speed: 200-400 bags per hour (at 10kg) - Set weight: 190kg Lodpfx Asxfapteaajhp - Set dimensions: 1000x850x2300mm For highly dusty products, an additional dust extractor can be connected. Price 13 500 EUR - EXW terms INVITE TO INQUIRE

Condition: new, I sell, milling machine new. Lhsdpfeuuiytox Aaasp

Year of construction: 2006, condition: ready for operation (used), Main Drive Number of axis 3 Movement Y-Axis Movement 250–300 mm Z-Axis Movement 250–300 mm This 3-axis SCHÜCO PBA 3250 was manufactured in 2006. It features a working length of approximately 3250 mm and is capable of processing aluminum and steel profiles. Equipped with a CNC controller and Schüco software, this machine is fully functional and has been regularly maintained. If you are looking to get high-quality milling capabilities, consider the SCHÜCO PBA 3250 machine we have for sale. Contact us for more information. Lhedsxxngajpfx Aaaop Application Types Milling

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 450 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm Lhjdpowb Ha Tjfx Aaaep – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg

Condition: good (used), In good technical condition and fully functional. Spindle speeds: 18. Speed range: 40–2000 rpm. Total power consumption: 2.2 kW. Machine weight approx. 1200 kg. Accessories. Lodpfx Asxx R Tvoaashp

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm - Maximum milling depth: 65mm Lhsdpfx Aexnymkoaajp - Maximum cutter diameter: 250mm - Spindle working length: 500mm - Spindle speed: 4600 rpm - Spindle diameter: 40mm - Max tool diameter: 250mm - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg ADVANTAGES – Polish manufacture – Not repainted – Used milling machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: used, Year of construction: 2005, - Heidenhain TNC 410 M contouring control, control panel can be moved over the entire machining length - Robust basic structure as welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z-axis with ball screw (20 m/min) - 2 chip drawers - Swiveling clamping device for 4700 mm workpiece length - 10 pneumatic workpiece clamps - Manually operated central lubrication system - Moving disk tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - machine light - Safety bumper - Machine protection hood pneumatic vertical opening - Year of construction 2005 - Control on: 26910h - Program run: 9185h - Spindle on: 6557h Defects: - Air hoses of the clamps must be partially replaced - Contact cables of the cylinders for the tensioner displacement must be partially replaced Machine specifications - Control: Heidenhain iTNC 530, 3 controlled axes - Travel X/Y/Z: 5000 / 275 / 310 mm - Working range X/Y/Z with swivel device: 4700 / 155 / 110 mm - Rapid traverse X/Y/Z: 30 / 10 / 10 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool change: disk changer with 8 tool positions - Tool holder: SK30 - Tool clamping: pneumatic - Coolant device: Micro-spray for flow drilling, cooling emulsion - Spindle speed: 80 - 6000 rpm - Speed correction: 80 - 120 % - Drilling capacity in St60/Alu Ø: up to 18 / 20 mm - Tapping capacity: up to M14 / M16 - Position measuring system: Rotary encoder Lhodpfx Asu E Ti Isaajp - Positioning accuracy: 0.05 mm - Repeat accuracy: 0.025 mm - Machining accuracy tolerance: ± 0.2 mm - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per outlet: approx. 600 l/min at 6 bar - Noise emission: 79 dBA - Electrical connection: 3x 400 V ± 5% / 50-60 Hz - Back-up fuse: max. 25 A - Power consumption: approx. 13 kVA - Control voltage: 24 V DC - Space requirement with safety fence: approx. 34 square meters (11.4 x 3 m) - Machine weight with accessories: approx. 5000 kg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 13,907 h, General Data Machine weight 9000 kg Control Unit Brand HEIDENHAIN Table Table load 800 kg Main Drive Number of axis 5 Spindle Speed 14000 RPM Spindle motor power 29.3 kW Tool taper BT 40 Ledpfx Aajxx Dvkeashp Movement X-Axis Movement 1020 mm Z-Axis Movement 610 mm Y-Axis Movement 610 mm Tools Slots in storage 32 Max weight 7 kg This 5-axis Eumach HSM-5XC was manufactured in 2015, featuring a Heidenhain control unit and a robust 5-axis rotary table with a Ø 610 mm diameter. It supports a maximum workpiece load of 500 kg and offers extensive axis travels (X/Y/Z: 1020/610/610 mm). The spindle reaches speeds up to 14,000 rpm, powered by a 29.3 kW motor. If you are looking to get high-quality milling capabilities, consider the Eumach HSM-5XC machine we have for sale. Contact us for more information. Application Types Milling