Used Manual Bending Machine for sale (70,977)

Condition: new, sheet width 3100 mm plate thickness 16 mm pre-bending 13 mm upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel Hodpeyv I Smsfx Akrol - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Hsdpfjyyl Nksx Akrsl Polished bending rail Weight: approx. 1000 kg

Condition: used, Max. bending length: 1020 mm Hsdjyyl Nqspfx Akrel Max. sheet thickness: 3.5 mm steel Polished bending rail Weight: approx. 1000 kg

Condition: excellent (used), functionality: limited functionality, Year of construction: 2007, actuation type: hydraulic, number of rollers: 3, shaft diameter: 60 mm, roller diameter: 224 mm, overall weight: 980 kg, Equipment: documentation/manual, emergency stop, foot remote control, SAF DS 80 HP Three-Roller Pyramid Profile Bending Machine Hjdpfxoyw Nh Eo Akrsl Used. Year of manufacture: 2007 “CE”. Immediate availability unless previously sold. Operation and maintenance manual included. No. 03 driving rollers. Hydraulic. Smart position indicator. One-piece tilting base. Hydraulic adjustment of bending roller. Universal standard rollers. Shaft diameter: 60 mm. Roller diameter: 224 mm. Shaft center distance: 160 mm. Profile bending capacity: 140 x 130 mm 85 x 20 – 100 x 12 mm 50 mm square 80 x 80 x 8 mm Motor power: 5.5 kW. Weight: 980 kg. Set of rollers supplied for round bending, in various diameters: Set diameter: 22 mm Set diameter: 34 mm Set diameter: 48 mm Set diameter: 62 mm

Condition: good (used), Year of construction: 1991, machine/vehicle number: 18402, Offer 26114 Technical Data: Hedpfjy D Rxrsx Akrol - Bending operation is performed manually, assisted by counterweight - Clamping of the upper beam via side eccentric lever and foot pedal - Max. working width: 2040 mm - Max. material thickness St 40: 1.00 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of upper beam: approx. 70 mm - Max. adjustability of bending beam: 10 mm - Space requirement: approx. W 2800 x H 1200 x D 900 mm - Weight: approx. 520 kg - Various bending rails as depicted

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) Hjdpey D Sy Rsfx Akrjl - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: new, sheet width 1050 mm plate thickness 1 mm roll diameter 56 mm dimensions of the machine ca. 1600 x 700 x 1050 mm Domestic equipments: Hjdpfx Akeyvvn Aerel - Upper roller can be swung out manually

Condition: ready for operation (used), Year of construction: 1999, pressure 36.0 t stroke 250 mm flat steel 200 x 10 mm working feed 6.0 - 24.0 mm/min return speed 60.0 mm/min work height max. 900 mm table: 580 x 1170 mm total power requirement 4.1 kW motor 400 Volt 50 Hz oil volume 60.0 ltr. weight 1100 kg range L-W-H 680 x 1170 x 1130 mm Current list price approx. € 28.000 Special price on request Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting - Several/various bending tools - Infinitely variable adjustment of bending speed and pressing force Hedpfx Akjyy A Idorsl - 1x freely movable double foot switch - Operating instructions

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 25164, overall weight: 230 kg, total length: 1,270 mm, total height: 1,150 mm, input voltage: 220 V, Equipment: emergency stop, Schwartmanns Round Bending Machine Type WSRM 04.2 Shaft diameter: 65 mm Sheet thickness: 1.25 mm Continuously variable working speed via rotary switch Dual safety control – emergency stop cable or button 230 V connection with Schuko plug for quick and easy setup Hedpfxoy Efklj Akrsl Three-shaft drive Device for conical bending by lowering the rear shaft on one side Swiveling top shaft for removing very small diameters Diameter adjustment via detent lever Maintenance-free dry plain bearings Stepless adjustment of bending shaft Integrated transport device Machine is in absolutely mint condition

Condition: good (used), Year of construction: 2005, control type: CNC control, pipe diameter (max.): 30 mm, Tube diameter: 30 mm Wall thickness: 2 mm Max. bending angle: +/- 180 + 10 ° Tube insertion length: 4100 mm Hjdpfx Akey Ddhterol - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec. (feed) - Longitudinal feed speed: 450 mm/sec. - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: M-BL1, FOR ROOFERS WHO REQUIRE A MACHINE WITH MOBILITY FOR EASY TRANSPORT. IDEAL FOR SMALL TEAMS WHO MOVE FREQUENTLY AND WORK TO TIGHT DEADLINES. LYNX – can be operated by a single person. This reduces working time by 30% and operator costs by up to 50%. Single-person operation increases work efficiency by 30%. The machine allows independent opening and closing of the top beam, regardless of the operator’s position. This ensures maximum cost savings and easy handling – the machine can be transported effortlessly, regardless of ground conditions. Technical specifications: - length: 2430 mm - width: 800 mm - height: 1210 mm - working area: 2190 mm - bending angle: 140° / 360° - bending beam: 15 mm - clearance: 60 mm - max. bending thickness: steel 0.8 mm, aluminium, copper 1 mm, stainless 0.5 mm --- --- --- --- --- --- --- --- --- --- --- --- LIGHTWEIGHT MANUAL BENDING MACHINE M-BL1 LYNX – set price: 6,700 PLN Hjdpeyzay Hjfx Akrjl THE SET INCLUDES: - rotary shear, - rear table, - front stops, - drop bar, - carrying handles, - protractor, - wheels, - magnets, - handle for opening/closing the top beam, - actuators for the bending beam. --- --- --- --- --- --- --- --- --- --- --- --- Optional accessories: VERMIS (roller bender) – 700 PLN Strix (measuring tool for front stops) – 300 PLN AngleLock™ (quadruple bending angle stop) – 400 PLN --- --- --- --- --- --- --- --- --- --- --- ---

Condition: used, Year of construction: 2015, total length: 1,500 mm, total height: 1,800 mm, total width: 2,500 mm, Empty weight: 1.000 kg Price: On request Capacity: 42 tons Max. bending stroke: 200 mm Table dimensions: - Length: 1250 mm - Width: 850 mm Ram dimensions: - Length: 300 mm - Width: 200 mm Model: Horizontal bending machine - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 308 - Motor power: 4.0kW - Transport dimensions: 1500mm x 2500mm x 1800mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Hsdpfx Akoyy Slxersl

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, roller length: 1,100 mm, working width: 1,030 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, overall weight: 440 kg, total length: 1,750 mm, total width: 650 mm, total height: 1,100 mm, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, 3 rolls plate bending machine DURMA MRB 1030/3mm rolling machine for sale in excellent condition. manufacturer: Durma MRB-E 1003 year of manufacture 2010 number of rollers 3 upper roller diameter Ø: 90 mm roll length: 1030 mm high tensile steel rollers with SAE 1050 quality certificate - Wire grooves at the ends of the rollers (4/6/9) mm CE certification Cone rolling Upper roller can be opened Manually adjusted rear and lower roller Operation: Foot pedal Motor power: 1.5kw braked gear motor Electrical connection 400 V Cast iron frame construction Machine weight: 440 kg length: 1750 mm width: 650 mm Hodpfjyzrcgjx Akrsl height: 1100 mm

Condition: new, Year of construction: 2024, neu 2024 9740 prompt, Zwischenverkauf v Türkei 6200 € 119.66 € 1 1050 mm 3 mm 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN Hodpfx Ajwiqnwokrsl

Condition: new, square edge steel 16 x 16 mm flat steel 100 x 5 mm L-beam 60 x 8 mm round bar steel 18.0 mm weight of the machine ca. 33.0 kg Properties : - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - - - - - - Cold bending capacity Flat steel 100 x 5 mm 65 x 10 mm Round steel 18.0 mm Square steel 16 x 16 mm Angle steel 60 x 8 mm Bending capacity hot Hodpfxexcux Rs Akrsl Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 12 mm - - - - - - - - - - Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - Offset block - Bending plate for round bar - Offset plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Condition: used, total length: 1,330 mm, total width: 1,040 mm, total height: 1,150 mm, Empty weight: 1.800 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Shaft diameter [mm]: 85 - Capacity diameter round [mm]: 60 - Transport dimensions: 1330mm x 1040mm x 1150mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Hodjxuf Slspfx Akrjl Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Empty weight: 800 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Control: Teach-in - Motor power: 4.0kW - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg Hsdexixruspfx Akrsl - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,000 mm, total width: 750 mm, total height: 1,400 mm, Empty weight: 400 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 Hjdpfx Aeypk Ebjkrol - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Moment of resistance [cm³]: 6 - Top roll diameter [mm]: 50 - Bottom roll diameter [mm]: 50 - Capacity diameter round [mm]: 35 - Transport dimensions: 1000mm x 750mm x 1400mm (l x w x h) - Transport weight [kg]: 400kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 Hsdpsxixrhjfx Akrsl - Shaft diameter [mm]: 155 - Capacity diameter round [mm]: 50 - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2001, total length: 1,200 mm, total width: 800 mm, total height: 1,700 mm, Empty weight: 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 371 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 1.1 - Shaft diameter [mm]: 50 - Transport dimensions: 1200mm x 800mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg Hodpfx Akewu Tnkerol - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, sheet width 3355 mm plate thickness 63,5 mm roll diameter 686 mm Hedpjyuql Sofx Akrjl voltage 400 V total power requirement 150 HP weight of the machine ca. 95 t dimensions of the machine ca. 62 m

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 18105876-5772, shaft diameter: 360 mm, roller diameter: 800 mm, overall weight: 46,000 kg, total length: 4,500 mm, total width: 4,850 mm, total height: 3,750 mm, operating speed: 6 mm/s, Certified shafts made of forged NiCrMo alloy steel + Protected with height adjustment system (PHAS) Quick bending roll configuration change system (TIMS Technology) Hodpfowayt Rox Akrjl Side guide rollers adjustable in 6 directions with fully hydraulic controls Steplessly adjustable rotation speed and simultaneous shaft movements Operating switches on a centrally movable control panel

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit Hodpfx Aebahd Eokrsl cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar length 3750 mm

Year of construction: 2012, condition: used, Make: ROSENBERGER, Model: RB20-LR, Year of manufacture: 2012, Serial no.: M1053, 2 CNC bending heads, bending capacity Ø 30 x 2 mm (steel), bending planes freely selectable within 138 mm total tool height, travel path X/Y/Z 1,416 x 260 x 1,170 mm, collet head with feed carriage, PLC control Siemens S7-300, touch display, infeed cycle conveyor, robot, make Motoman, robot controller, type SK16, Teach-In terminal MRC, punching station, make TOX, safety devices, safety fence systems, control cabinets, accessory cabinet with 8 drawers. Hedeyx Etaepfx Akrsl

Year of construction: 2012, condition: used, Make: ROSENBERGER, Model: RB20-LR, Year of manufacture: 2012, Serial no.: M1057, 2 CNC bending heads, Bending capacity Ø 30 x 2 mm (steel), Bending planes selectable within a total tool height of 138 mm, Travel range X/Y/Z 1,416 x 260 x 1,170 mm, Collet head with feed slide, PLC control Siemens S7-300, Touch display, Loading magazine, 2 robots, make: Motoman, Robot control unit, make: Yasnac, Model: K10, Teach-in terminal MRC, Spray cleaning system, Chamber size 500 x 300 x 1,000 mm, PLC control with operator panel, make: Siemens, Model: SIMATIC Panel, Thermostat, 3 washing chambers, Tube cutting station, make: FZH, year: 2012, serial no.: M99964, Control system, Display make: Siemens, Model: SIMATIC Panel touch. Hedpfx Akeyx Erijrjl