Used Milling Center for sale (19,503)

Condition: used, Year of construction: 2000, x-travel 1.050 mm y-travel 560 mm z-travel 450 mm Control OKUMA OSP-U100M-H table dimensions 1.300 x 560 mm spindle tunring speed 10.000 U/min tool taper BT 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Djdpfx Aoyxhiwogfsur Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 610 mm y-travel 510 mm z-travel 610 mm Control MAX5 distance spindle /table 150 - 760 mm table surface area 760 x 510 mm T-slots (number x width x distance) 5 x 18 H8 x 100 mm table load 1.360 kg number of spindle speeds 12.000 spindle drive 9 kW torque 95 Nm tool taper SK-A 40 number of tool places 30 Pos. tool diameter 80 mm Tool diameter with free secondary positions 130 mm Dsdeyxhiqepfx Agfjur tool length - max. 300 mm weight of tools 7 kg auto power on hours ca. 17.626 h spindle hours ca. 900 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The main spindle was replaced a year ago. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Make: WMZ / PITTLER, Model: PVSL N1 2/2, Year of manufacture: 2009, Machine no.: ZN022, Control: Siemens Sinumerik 840D sl Powerline including handwheel, 2 spindles, 2 workspaces, 2 cross slides, max. turning diameter: 140 mm, max. workpiece height: 80 mm, max. spindle speed: 6,300 rpm, 2x 8-position turrets, driven tool stations, chip conveyor by Knoll, extraction unit by ILT, recooling unit by Hydac, workpiece automation with raw part and finished part storage Duodsx Ahfwjpfx Agfjr +++ Note: Machine is part of an online open sale! +++

Condition: like new (used), Year of construction: 1985, Parts shown by hand not come. 4 axis not come with machine. Duedpfxsgw Shrs Agfor

Condition: like new (used), Year of construction: 2002, Parts shown by hand not come Dsdpfxok It Ute Agfjur

Condition: like new (used), Year of construction: 2001, Parts shown by hand not come. Dujdpfx Aek Iugzsgfjr

Year of construction: 2012, condition: like new (used), Parts shown by hand not come. With machine come tool holders SK 40. Duodpfelpcdwsx Agfsr

Condition: good (used), Year of construction: 1999, Parts shown by hand not come. Dodpfx Agewbz Tujfeur

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Technical details shown in attached pdf document. Dusdeu Ibihjpfx Agfjr Parts shown by hand not come.

Condition: like new (used), Year of construction: 2014, Parts shown by hand not come. X1050 mm Y 870 mm Z 970 mm Complette tehnical documentation come with machine. Djdpfx Ageh Ryvbefeur

Condition: good (used), Year of construction: 2003, Parts shown by hand not come. Djdpfxeu N H Eqo Agfeur

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Tool cabinet and cutting tools not come. Only tool holders will come. Dusdpfox Atyaex Agfor

Condition: good (used), Year of construction: 2011, Machine is in very good working condition. Duodpfex I Rkpox Agfjr Descriptionis and technical details are on photos.

Condition: good (used), Machine is in good working condition. Parts shown by hand not come. Dodpjylxg Ejfx Agfsur

Condition: used, Year of construction: 2017, Technical details: turning diameter: 356 mm turning length: 705 mm control: CELOS M730 UM MAPPS swing dia.: 742 mm standard turning diameter: 275 mm Dusdpfx Aoyxpv Sjgfjr travel -x axis: 260 mm travel -y axis: 100 ( ±50) mm travel -z axis: 795 mm rapid travel - longitudinal/face: 30 / 30 m/min Rapid travel B-axis (parts transfer subspindle): 734 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 15/18,5/18,5 kW Spindle 1 Torque: 409/505 /599 Nm Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 4500 1/min Spindle 2 power: 7,5/11 kW turret stations / rotary tool stations: 20 / 20 BMT40 speed of driven tools: 10000 1/min : 3.7/5,5/5,5 kW torque rotary tools: 14 / 24 Nm total power requirement: 38 kVA weight of the machine ca.: 6,3 t dimensions of the machine ca.: 4 (9) x 2,1 x 2,2 m Accerories Chip conveyor Barfeeder Interface Parts catcher Sp. 1 und Sp. 2 Parts and total counter Signal lamp 3 colors Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) Conveyor for partsdisposal Automatic door Interface for coolant through the spindle Coolant through spindle 70 bar Knoll Program restart Tool presetter Spindle 1 & 2 Coolant shower 1m Barfeeder magazine IRCO High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by CELOS-MAPPS 4 Control. Very low cutting hours. Machine is like new. All existing toolholders and life tool holders come with the machine. *

Condition: used, Year of construction: 2015, Technical details: turning diameter: 65 mm turning length: 120 mm control: Index C200-4D SL z-axis main spindle travel: 390 mm z-axis subspindle travel: 390 mm x-axis subspindle travel: 600 mm Travel Y1: ± 80 mm Travel y2: ± 80 mm x-axis rapids: 45 m/min y-axis rapids: 15 m/min z-axis rapid travel: 45 m/min Spindle 1 RPM: 5000 1/min Spindle 1 Power: 35,5/27,5 kW Spindle 1 Torque: 170 /125 Nm Spindle 2 RPM: 5000 1/min Spindle 2 power: 35,5/27,5 kW Spindle 2 torque: 170/125 Nm c-axis: 0,00014 ° bar material dia.: 65 mm spindle nose: AD 140 spindle bore: 85 mm Milling spindle 1 RPM: 18000 1/min Milling spindle 1 power: 11 kW Milling Spindle1 torque: 19 Nm Milling spindle 2 RPM: 18000 1/min Milling Spindle 2 power: 11 kW Milling spindle 2 torque: 19 Nm B-axes swivel angle: 230 ° B-axes torque: 440 Nm B-axes angle resolution: 0,001 ° Milling spindle 1 & 2 tool magazine: 80 HSK A40 Milling spindle 2 tool magazine static tools : 6 x VDI 25 internal coolant system feed: Knoll 80 bar / Ecofluid weight of the machine ca.: 16,3 t dimensions of the machine ca.: 3,73x2,92x2,58 m Accerories Chip conveyor Spindle 1 Chuck SMW HFKN 165-46 mm Spindle 2 Chuck SMW HFKN 165-46 mm Collet chuck main spindle Hainbuch Spanntop Collet chuck subspindle Hainbuch Spanntop Barfeeder Interface Unimag Short bar loader IRCO ILS RBK 10016 Parts catcher for main- and sub-spindle Conveyor for partsdisposal Air Filter Büchel High performance heavy duty turning and milling center with 2 multi axis milling heads and two spindles. Both milling heads are full 5-axis. The z-axes are installed in the spindle heads The x2 axis is installed in the spindle head of the subspindle Milling1 head has x/y/b -axes Milling head 2 has y/b-axes Both milling heads have B-(Swivel-)axis 230° The machine is equipped with an IRCO short barfeeder and parts gripper for finished parts. Max. dim for finished parts: Ø 65 mm, length 120 mm, weight 5 kg. Rest piece length 200 mm Dusdpsyxpadofx Agfor All linear- axes are equipped with linear scales. Coolant through main and subspindle. Tool breakage control from drill Ø 1mm All existing tool from machine are part of delivery Machine is in excellenten Condition! *

Condition: used, Year of construction: 2019, x-travel 660 mm y-travel 406 mm z-travel 508 mm Control MAX5 distance spindle /table 102 - 610 mm Duodpjyw Tncjfx Agfjr table surface area 762 x 406 mm T-slots (number x width x distance) 3 x 18 H8 x 100 mm table load 682 kg spindle tunring speed 12.000 U/min spindle drive 11 kW torque 61 Nm tool taper SK 40 number of tool places 20 Pos. tool diameter 89 mm Tool diameter with free secondary positions 127 mm tool length - max. 250 mm weight of tools 7 kg spindle hours ca. 1.664 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Electronic handwheel - Synchronous thread cutting - Internal coolant supply 20 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Dsdpfx Agjyw Tm Ejfjur Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm Control Roeders RFM 600 DS table-size 700 x 550 mm spindle tunring speed 42.000 U/min tool taper HSK 40 number of tool places 20 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Dedsyw Tmxopfx Agfjur Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, TECHNICAL DETAILS: Manufacturer: DMG Gildemeister Model: NEF 400 Year of manufacture: 2009 Control system: Heidenhain Power supply: 400 V / 50 Hz Connected load: approx. 21 kVA Current: 31 A Control voltage: 230 V / 24 V Cable specification: L ≤ 5 m, 230 V – 150 W Made in Europe Dedpoyxqa Ejfx Agfjur

Condition: excellent (used), Year of construction: 2006, For sale: A reliable vertical CNC machining center Yamazaki Mazak Nexus VCN-510C – a high-end production machine from the renowned Japanese manufacturer MAZAK, known for its precision, durability, and stable operation in industrial manufacturing environments. The VCN-510C is ideally suited for machining steel, aluminum, and workpieces requiring high accuracy and repeatability. Thanks to the MAZATROL 640M control, the machine offers intuitive operation and rapid production setup. Technical specifications: Year of manufacture: 2006 Dujdpsyha Ivofx Agfsr Control: MAZATROL 640M X-axis travel: 1,050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm T-slot table Automatic tool changer (ATC) Central lubrication Electrical cabinet Weight: 7,100 kg Low operating hours

Condition: used, NZX 1500/800SY is a CNC Turning-Milling-Drilling Center with high precision, accuracy and reliability. Capacities: 2 turning spindles, 2 revolvers, swing diameter over bed 800 mm, max. turning Ø 320 mm, max. bar Ø 52 mm; travels Z 810 mm, X 210 mm, Y 110 mm (both carriages). Specs: spindle speeds 0–6000 t/min, spindle power 22/18.5 kW, driven tools power 7.5/5.5 kW, spindle nose JIS A2-5, spindle hole 61 mm; rapid traverse X 30 m/min, Z 50 m/min, Y 20 m/min; weight ~8100 kg; overall dims L4396×W2835×H2320 mm. Accessories: direct measuring system X axis, lamp, coolant system, coolant through counter spindle, loader interface, parts catcher, workpiece conveyor, chip conveyor. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Duodpfxoyxn I Hs Agfer

Condition: excellent (used), MAZAK INTEGREX 400-3S is a CNC Turning-Milling-Drilling Center designed for precision, high accuracy and reliability. Capacities: distance between centres 1500 mm, swing 760 mm, max turning length 1524 mm, bar passage 102/77 mm, tool magazine 40 stations (Ø max 90 mm, L 400 mm). Main specs: main spindle A2-8 stepless 35–3300 t/min 30 kW 1200 Nm; back spindle A2-8 35–4000 t/min 26/22 kW 500 Nm; milling spindle CAPTO C6 15–12000 t/min 18.5 kW 120 Nm. Travels X630 Y±115 Z1585 mm; feeds 0–8000 mm/min; rapid X/Z 38 m/min Y26 m/min; weight ~13300 kg; footprint 5110x2196 mm; height 2798 mm. Equipment: coolant 444 l (15 bar through milling spindle), Forkhardt 3-jaw chucks Ø400/315 mm, linear scale for X, RS232, PCMCIA, spindle sync, chip conveyor, synchronized tapping, foot pedal. Enables tight tolerances; typical applications: automotive, aerospace, medical, machine tools, watchmaking. Duedpfoyxn H Njx Agfsr

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Time recording from Feb. 2025 Operating hours = 16085 h Main spindle = 616 h Milling spindle = 369 h CNC control Siemens Sinumerik Si 840D sl Max. center distance 4500 mm Working height 1375 mm X-axis travel -15 +725 mm Y-axis travel -245 + 4756 mm Swing diameter over cross slide 780 mm Swing diameter over bed 820 mm C-axis, smallest increment +/-0.001° Main spindle A15 with BVG; 3135 N;/2000 rpm Spindle head DIN 55026 Form A 15 Max. speed 3000 rpm Max. torque 3135 Nm Drilling/milling unit Milling power (40/100% duty cycle) 36.5/29.8 kW Torque up to 1110 rpm (40/100% duty cycle) 328/261 Nm Max. spindle speed 5000 rpm Swivel range (B-axis) -105 +95° Vertical travel (Y-axis) -250 +250 mm SR5 steady rest with eccentric fine adjustment 45–310 mm C8 tool system Tool magazine (2 magazines) 144 Tailstock Dusdoyxp H Dspfx Agfjr Quad diameter MK6 180 mm Quad stroke 170 mm Quad force (adjustable) 5–28 kN Quad fine adjustment +/- 0.15 mm Optional equipment Coolant tank capacity 990 l Workpiece measurement MC (Reinshaw) Software Gear hobbing &more

Condition: excellent (used), Year of construction: 2017, MAZAK QUICK TURN 250MY Max. turning diameter: 380 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar capacity: 80 mm Machine is equipped with: - Mazatrol SmoothG CNC control - KITAGAWA three-jaw chuck BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - automatic parts catcher Dujdoyki Taspfx Agfor - interface for bar feeder - signal light (3-color LED) - reinforced coolant pump - chip conveyor - standard MAZAK tool package