Used P200 for sale (187)

Condition: good (used), Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor, gear pump, gear pump -Manufacturer: Bucher, hydraulic pump gear pump Nkedpfx Ahjgn Hyms Rew -Type: AP200/6.5 S-259 -Dimensions: 100/80/H80 mm -Weight: 1.9 kg

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, drive motor, gear pump -Manufacturer: Bucher, hydraulic pump, gear pump -Type: AP200/8.5 S 259 -Flange/shaft: see photo, square 8 x 17 mm Nodsvwka Depfx Ah Rokw -Number: 7 pumps available -Price: per piece -Dimensions: 84/82/H100 mm -Weight: 2.0 kg

Condition: good (used), Reflective light barrier, light barrier, reflective light switch -Number: 2 buttons available -Price: per piece -Weight: 0.05 kg Nksdpfscqp Hlsx Ah Rjw

Condition: good (used), Year of construction: 2014, conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: MK Maschinenbau Kitz, belt conveyor on mobile base frame, height adjustable -Type: GUF-P 2000 AF 2900/600 -Speed: 13 m/min -Belt width: 590 mm -Conveyor length: 2900 mm -Drive: SEW-Eurodrive 0.12 kW, see photo nameplate -Case: VA Nodsvmm Uiopfx Ah Rjkw -Transport dimensions: 2940/730/H1710 mm -Weight: 115 kg

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor Nkodpsxl Rzgefx Ah Rjw -Type: N365 OMP 200 151-0615 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 2x aggregate available -Price: per piece -Dimensions: 210/130/H120 mm -Weight: 7.1 kg/piece

Condition: excellent (used), mileage: 29,750 km, power: 162 kW (220.26 HP), first registration: 02/2002, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,680 mm, fuel: diesel, color: red, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 6,930 mm, total width: 2,380 mm, total height: 3,100 mm, Year of construction: 2002, Equipment: ABS, trailer coupling, = Additional Options and Accessories = - Leaf suspension - Air horn Nkedeyiaigepfx Ah Rsw - Radio/CD player - Side door - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication - Tow hitch = Further Information = General Information Cab: double Technical Information Number of cylinders: 6 Axle Configuration Suspension: leaf suspension Front axle: Max. axle load: 4,450 kg; Tyre tread left: 90%; Tyre tread right: 90% Rear axle: Twin tyres; Max. axle load: 8,500 kg; Tyre tread inside left: 90%; Tyre tread outside left: 90%; Tyre tread inside right: 90%; Tyre tread outside right: 90% Weights Unladen weight: 6,670 kg Payload: 5,320 kg Gross vehicle weight: 11,990 kg Condition Technical condition: very good Optical condition: very good Further Information Contact Andre, Henri, or Andre for more information.

Condition: used, Year of construction: 2008, x-travel 2000 mm y-travel 620 mm z-travel 520 mm tool taper 2500 x 600 mm control 2000 kg tool magazin: SK40 rapid traverse HEIDENHAIN table-size 30 - 8000 U/min feed 45 m/min total power requirement 45 m/min workpiece weight max. 20 kW diameter of tools max. 10500 kg tool length - max. 5400 x 3300 x 3000 mm Equipment: Nkedpfx Aheulnbko Rsw - Heidenhain iTNC 530 control system - Tool magazine with 30 spaces - Chip conveyor - Screen filter system with IKZ - Operating instructions Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm Nkodpot I D U Ejfx Ah Row stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Condition: new, Year of construction: 2026, Laser fiber cutting machine GEP Series A modern, fully enclosed fiber laser for sheet metal cutting. The offer includes a laser with a power from 1000W to 6000W, and the highest quality components ensure long and trouble-free use of the fiber laser. Nkedpfx Ajiznlyeh Rjw Fiber optics laser cutters constitute modern devices with many advantages. These are not only a perfect and more profitable alternative to the CO2 technology, but they also possess a lot of pros by themselves, such as improving the production by considerable margin and increasing its quality. FIBER technology allows for cutting sheets and other materials of various thickness: from very thin to very thick. The length of a wave in a FIBER laser is 1.064 micrometre long. The biggest advantages of the laser are failure-free optical fiber cable no elements that wear out the source of the fiber optic laser takes 1/3 less space high energetic efficiency - 100000 hours of work universal applicability (specific metal sheets, carbon and stainless steel, copper, brass, aluminium, titanium) Optical fiber laser increases the efficiency by 80% reduces the handling costs by 70% saves 80% of energy minimises the consumption of gas saves space in the workplace by 30% Technical parameters WORKING AREA 1500x3000 mm | 2000x4000 mm | 2000x6000 mm POWER 1000W 2000W 3000W 4000W 6000W POSITIONING REPEATABILITY ACCURACY ±0.02 mm/m MAXIMUM SPEED 120 m/min MAXIMUM ACCELERATION 1,5G DIMENSIONS 8850x2850x2310 mm POWER SUPPLY 400V 50Hz Safety and pollution Fully built-on laser Observational window with a laser protective glass compliant with the European CE marking The smoke produced by cutting can be filtered internally, and not pollute environment Sliding gate made of annealed aircraft aluminium The construction of the sliding gate is made of annealed aircraft aluminium, formed with a strength of 4300 tonnes, achieving unprecedented rigidity. Aircraft aluminium has many advantages: high rigidity (higher than cast iron), small mass, resistance to corrosion and oxidation as well as susceptibility to machining. Replaceable working table Replaceable working table consists of upper and lower platforms, whose movement and swapping are controlled through the controller. The machine can swap the platform in 15 seconds. Welded bed made of rectangular profiles The inner structure of the bed adopts a metal honeycomb structure which is welded by a plurality of rectangular tubes. Inside the tubes, stiffeners are placed to increase the strength and tensile strength of the bed, and also to increase the strength and stability of the guide rail to effectively avoid deformation of the bed. RayTools head Automatic focus regulation – Autofocus – The software automatically regulates the focusing lens during cutting metal sheets of various thickness. The speed of automatic focus regulation is 10 times higher than the speed of manual regulation. Greater range of manual regulation – The range of regulation -10mm - + 10 mm, precision of 0.01 mm is useful in when it comes to materials of different thickness (0–20 mm) – Below 1500W. Long durability. Collimating lenses and converging lenses possess a heat sink which cools down water, in turn decreasing the temperature of a cutting head, in order to improve the durability of the cutting head. The laser uses components from world producers

Condition: excellent (used), DEMAG wheel drive motor 36/24 K6P for electric wire rope hoist P2000 / P1600, optionally with clutch and brake disc. Type 36/24 K6P, motor completely overhauled, in very good condition. Armature / rotor / runner, bearing end shields, clutch, and brake also available separately. Nedpov Uai Aofx Ah Rskw

Condition: good (used), approx. 15 Corlettes, Cordes, width 2m, not stackable - used - : Prices per item from location: €109 (net)! Njdpfxevnahrj Ah Rokw Manufacturer: Cordes Type: Corlette sp-200.525 Year of construction: unknown Dimensions: Width: approx. 2m Depth: approx. 1.10m 1.72 m height including wheels 1.56 m without wheels Not stackable Load capacity: 950kg Own weight: approx. 93kg With drawbar and coupling Color gray Condition: good Available: immediately Location: 51373 Leverkusen

Condition: used, Technical details: floor-plate length: 2003 mm plate width: 1005 mm plate height: 180 mm transport dimensions LxWxH: 2,02 x 1,05 x0,18 m 3 pcs availabe (price per piece) Cast steel Table surface 2020mm x 995 mm Longitudinal groove: Number 4 Size: a=38, h=60, b=59, c=24 mm Center-to-center distance 250 mm Fixing hole: Number 4 Size D=30mm * Nkedownfu Nspfx Ah Rsw

Year of construction: 2025, condition: new, 18 kW e-heater for 1000 pices 1 liter bottles Nkjds Hmwkjpfx Ah Rsw used for pasteurization of cold filled bottles, jars,... automatic temperature control 400V 50Hz 32A 18kW mounted on moveable frame

Year of construction: 2011, condition: used, functionality: fully functional, ALEXANDERWERK ROLLER COMPACTOR, MODEL WP 200 Machine for compaction of the raw material is exclusively effected by the press rollers under hydraulic pressure. Specifically for use in the production area. Built in 2011. CHARACTERISTICS Nsdpfx Aoycw Uvsh Rekw - Roller diameter: 200 mm - Roller width: 75 mm - Control system: external control cabinet (two cells) - Equipped with Combi-Vent-Feeder (CVF), consisting of the CVF Stirrer and the CVF Feed Screw, for optimized de-aeration of the raw material and allows for an automatic blending of undersize material (if any) with raw product PRODUCTION - Output: up to 500 kg/h (lactose) - Maximum roller gap: 5 mm - Maximum roller speed: 38 U/min - Maximum pressing force: 20 kN/cm SIZE - Height: 2,010 mm - Width: 1,245 mm - Depth: 1,700 mm - Weight: 2,450 kg - Weight without switch cabinet: 2,050 kg - Switch cabinet weight: 400 kg - Height of switch cabinet: 2,100 mm - Width of switch cabinet: 800 mm - Depth of switch cabinet: 600 mm

Condition: used, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 8,960 mm, color: white, Year of construction: 2018, Equipment: tail-lift, General information Year of manufacture: 2018 Axle configuration Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Steering; Tyre profile left: 20%; Tyre profile right: 20% Weights Empty weight: 9.190 kg Carrying capacity: 31.810 kg GVW: 41.000 kg Functional Tail lift: Dhollandia, slider lift, 2000 kg Make of bodywork: Krone Nkjdpfx Ahjyftz Re Rew Maintenance APK (MOT): tested until 04/2026

Condition: good (used), -Stainless steel, work table -Design: stable -filing Nkjdpob A I Ndsfx Ah Rjw -double-sided table -Dimensions 2000/1800/H810 mm -Weight: 117 kg

Condition: good (used), -Stainless steel, work table -Design: stable Nedpfxob A I Ncs Ah Rokw -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 100 kg

Condition: good (used), -Stainless steel work table Nsdpfxeb A I N Ee Ah Rjkw -Design: stable -Base floor: 1 -border -filing -Dimensions: 2000/930/H930 mm -Weight: 82 kg

Condition: good (used), -Stainless steel work table -Design: stable -filing -double-sided table Nsdpfxsb A I N Is Ah Rekw -Dimensions: 2000/1800/H800 mm -Weight: 120 kg

Condition: used, Year of construction: 2006, with tiltable saw blade for mitre cuts from government authority used, top condition, low hours Manufacturer: J. Neu Model: Piccolo EP 200 Year of manufacture: 2006 Nksdpoyb S Hqjfx Ah Row CE type-tested Motor: 5.5 kW Cutting height approx. 200 mm Cutting width approx. 550 mm Blade diameter approx. 600 x 30 mm Tiltable: left 60° – right 45° Height adjustable from the front via handwheel Extraction connection D 100 mm Required space approx. 1200 mm x 1700 mm x 1700 mm Original price approx. €15,000.00 Location: 97447 Gerolzhofen, loaded free of charge, unpacked Delivery in as-inspected condition No warranty or guarantee

Year of construction: 2025, condition: new, functionality: fully functional, MIXER FOR POWDERED INGREDIENTS/ PRODUCTS Nkedpfx Ajx Dicash Row Serves mixing powdered products Made of stainless steel Pneumatic opening of the lid and the dispensing system Two stirring speeds TYPE- MPP 200 L/B/H- 1980 mm/1010 mm/ 1530 mm TOTAL VOLUME- 250 L

Condition: good (used), Hydraulic pump, oil pump, gear pump Nkodpfxeb A Sizo Ah Rsw -Recording wave: -Dimensions: 180/160/120 mm -Weight: 4.5 kg

Condition: good (used), Hydraulic pump, oil pump, gear pump -Recording wave: Price: per piece Njdpfob A Siysx Ah Rokw Quantity: 2 available -Dimensions: 170/120/110 mm -Weight: 4.3 kg

Year of construction: 1992, condition: good (used), Control system conversion 2022 to CYBELEC VisiTouch Pac pressure 200 t folding length 3050 mm column width 2550 mm Control system CYBELEC VisiTouch Pac ram stroke 524 mm Machine weight approx. 17.000 kg Equipment: - Control system conversion 2023 to CYBELEC VisiTouch Pac Nsdpfjim R N Hox Ah Rekw - controlled axes: Y1, Y2, X, R, crowning - hydraulic punch clamping - hydraulic die clamping - 4-stage pneumatic die displacement

Condition: used, Year of construction: 2011, functionality: not functional, total height: 2,500 mm, total length: 12,000 mm, total width: 4 mm, power: 65 kW (88.38 HP), overall weight: 10,305 kg, bar diameter (max.): 110 mm, pipe diameter (max.): 110 mm, turning length: 350 mm, workpiece diameter (max.): 110 mm, Equipment: documentation/manual, We are offering this used Sinico SIN-O-MATIC TOP 2000 cutting and end-finishing machine, year of manufacture 2011. Model: SIN-O-MATIC TOP 2000 Type: TR110/2-350-CL-S CNC Serial number: 1459 Year of manufacture: 10/2011 Weight: 7,200 kg (plus magazine) Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Nsdpsycr Nhjfx Ah Rekw Installed power: 65 kW max CNC control by NUM Automatic machine for cutting to length and end-finishing. Transfer machine with horizontal axis table for cutting and end-processing of tubes and bars. Flexible and highly adaptable CNC machine. It ensures high productivity, up to 2,500 parts/hour, and is designed for processing small to large workpieces: bar diameters up to 110 mm, finished part lengths up to 350 mm. Maximum versatility for machining tubes and bars. The machine is capable of performing the following operations: Chamfering – Face milling – Thread cutting – Forming – Marking Various spare parts, clamping jaws, and accessories are included. The machine is still assembled but has a fault, which is why it cannot be shown under power. If you have any questions or need further information, please feel free to send us a message or give us a call.