Used Press-Fit Machine for sale (68,966)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Complies with CE standards • Corner press machine designed for joining aluminium profiles at 90 degrees Hfedpfx Ajrbk Tfjd Uod • 2 upper presses and blade movement are hydraulic • Equipped with a mm scale system for adjusting blade height and feed • Centering square stop is hydraulic • Drain button for fine adjustment is available • Machine comes with 2 pieces of 4 mm blades • 2 pedals are used for hydraulic pressing and profile clamping • Polyamide plate is provided to prevent damage to profile surfaces • Left and right profile support arms are available

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic - There is a mm ruler system for the height and advancement of the blades. - Centering miter wedge is automatic - Drain button available for fine adjustment - Pneumatic presses use 2 pedals to squeeze the profile - Profile surfaces are polyamide sheet to prevent damage Hjdpfsrbiv Aex Ad Ujfd - Side support arms available

Condition: used, Display unit Condition: Like new Included in delivery: Hfsdsyamc Depfx Ad Usd Equipment case Device Operating instructions Bit This item is an unused display unit.

Year of construction: 2022, condition: excellent (used), Machine for producing pressed pâtés, semi-hard and hard Hfsdpexf I I Dofx Ad Uod

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Hfodpemck Rysfx Ad Ujd Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Hfjdpfxexpqy Dj Ad Ujd Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) Hfsdpfx Aow Iq Ugjd Usd - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Hfedpfsx U Eiaex Ad Ued Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. Hfedpfxotia Hhj Ad Ujd

Condition: good (used), Schuler PE4s 50/800 high-speed press  Hfedpsgryc Nefx Ad Usd Manufacturer: Schuler   Type: PE4s 50/800 High speed press 61/21 600/3 pressing force: 50 t throat depth: 800 mm Stroke rate /min: 125-300 slide stroke: 40 mm Kohler decoiler 500.1 M After the purchase you will also get the documentation We sell a large number of paternosters. In addition to approx. 50 paternosters, there are countless other machines available. After purchase the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, table width: 1,200 mm, table length: 2,200 mm, pressing force: 600 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, Eccentric presses are a type of mechanical press driven by force generated via an eccentric mechanism, and are commonly used for cold forming operations such as punching, cutting, and forming. H type (straight-side) eccentric presses provide high stability and process safety in applications requiring large die tables and heavy-duty tooling, thanks to their rigid frame design. The CRONOSSTECH CEHP 600 – H Type Eccentric Press 600 Ton is engineered for stable operation in high-volume production, prioritizing die protection and operator safety. With its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it ensures reliable performance under continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die/tooling protection provided by hydraulic overload protection system - Precise guidance with 8-point ram and balancer piston Hodpex N R A Usfx Ad Usfd - Controlled and user-friendly operation with PLC and touchscreen interface - High operator safety via light curtain protection system Application Areas - Punching/cutting/forming applications requiring large tables - Mass production with automated feed lines - Heavy die and high tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • Additional T-slotted plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balancer piston on the ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain (photoelectric safety guard) • Enclosed oil reservoir with gear unit • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety cover at table front • Custom-specification dies ✅ TECHNICAL SPECIFICATIONS (CEHP 600) Capacity: 600 Ton Table–Ram Distance: 500 mm Housing Width: 2350 mm Ram Adjustment: 120 mm Press Width: 3100 mm Press Depth: 3500 mm Press Height: 5200 mm Table Size: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (fixed): 200 mm Motor Power: 90 kW Weight: 77,000 kg ✅ PRODUCTION / PROCUREMENT NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, table width: 1,200 mm, table length: 2,200 mm, pressing force: 500 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates with a force generated through an eccentric mechanism and is used in cold forming operations such as punching, cutting, and forming with dies. H type (straight-side) eccentric presses provide high stability and process safety for large bed and heavy die applications, thanks to their rigid frame constructions. The CRONOSSTECH CEHP 500 – H Type Eccentric Press 500 Ton is designed for stable operation, die protection, and operator safety in high-volume production. Featuring a monoblock frame, 8-guide ram system, hydraulic overload safety device, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die/equipment protection with hydraulic overload safety device - Precise guidance with 8-guided ram and balancer piston - Controlled, user-friendly operation with PLC & touchscreen interface - High operator safety with light curtain protection Areas of Use - Punching/cutting/forming applications that require a large table - Serial production with automated feeding lines Hfjdpfx Adsx N R Ahj Uod - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • T-slotted additional sub-plate • 8-guide ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse movement • Hydraulic overload safety device • Motorized ram adjustment system • Light curtain safety guard • Enclosed gear group in oil sump • Dual-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety guard in front of the table • Custom die specifications as required ✅ TECHNICAL SPECIFICATIONS (CEHP 500) Capacity: 500 Tons Table-Ram Distance: 500 mm Housing Width: 2330 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 3350 mm Press Height: 5000 mm Table Size: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 75 kW Weight: 68,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, table width: 1,200 mm, table length: 2,000 mm, pressing force: 400 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, Eccentric presses are a type of mechanical press that operate with force generated via an eccentric mechanism, ideal for cold forming processes such as punching, cutting, and forming. H-type (straight-side) eccentric presses provide high stability and process reliability in applications requiring large tables and heavy dies, thanks to their rigid frame structures. The CRONOSSTECH CEHP 400 – H Type Eccentric Press 400 Ton is engineered for high-output production, featuring a design focused on stable operation, die protection, and operator safety. With its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance for continuous production demands. Key Advantages: - Stable operation with large dies thanks to a 2000×1200 mm table size - Die/equipment protection via hydraulic overload safety - Precise guidance with 8-point guided ram and balancer piston - Controlled and user-friendly operation with PLC + touch screen interface - Maximum operator safety with light curtain protection system Typical Applications: - Punching/cutting/forming processes that require a large table - Mass production with automated feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel welded body construction • Pneumatic clutch and brake • Additional plate with T-slots • 8-point guided ram • Adjustable stroke with single connecting rod • Balancer piston in the ram Hodpfx Adsx N Rzwo Uofd • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touch-sensitive LCD screen • Motor reverse function • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety barrier • Enclosed oil tank with gear set • Double-coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover in front of the table • Custom die options as per requirements ✅ TECHNICAL SPECIFICATIONS (CEHP 400) Capacity: 400 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 3050 mm Press Depth: 3200 mm Press Height: 4700 mm Table Size: 2000×1200 mm Ram Face Size: 2000×1200 mm Stroke (Fixed): 200 mm Motor Power: 55 kW Weight: 51,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales support are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, table width: 1,200 mm, table length: 2,000 mm, pressing force: 300 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, powered by force generated through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process security in large bolster and heavy die applications thanks to their rigid frame structure. The CRONOSSTECH CEHP 300 – H-Type Eccentric Press (300 Ton) is designed for stable operation in high-volume production, focusing on die protection and operator safety. With its monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure, it offers reliable performance for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2000×1200 mm table size - Die/equipment protection with hydraulic overload safety device - Precision guidance with 8-point slide and balancer piston - Controlled and user-friendly operation with PLC + touchscreen interface - High operator safety with light curtain (photoelectric safety guard) Applications - Punching/cutting/forming operations requiring a large table - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • T-slotted additional bolster plate • 8-point guided slide • Adjustable stroke on single connecting rod • Balancer piston on slide • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor rotation • Hydraulic overload safety • Motorized slide adjustment • Light curtain safety guard • Enclosed oil tank with gear set • Double-solenoid safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap handling/disposal systems • Sliding safety door at the table front • Custom die manufacturing as required ✅ TECHNICAL SPECIFICATIONS (CEHP 300) Capacity: 300 Ton Table-Ram Distance: 500 mm Housing Width: 2,130 mm Ram Adjustment: 120 mm Press Width: 2,900 mm Press Depth: 2,750 mm Press Height: 4,700 mm Table Size: 2,000×1,200 mm Hfodpfx Adox N Rxve Usd Ram Face Size: 2,000×1,200 mm Stroke (Fixed): 200 mm Motor Power: 45 kW Weight: 41,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, table width: 1,100 mm, table length: 2,000 mm, pressing force: 250 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process reliability in large table and heavy die applications thanks to their rigid body structures. The CRONOSSTECH CEHP 250 – H Type Eccentric Press 250 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With its monoblock body, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages: - Stable operation with large dies thanks to a 2000×1100 mm table size - Die/equipment protection with hydraulic overload protection - Precise guidance with 8-point guided ram + counterbalance piston - Controlled and user-friendly operation via PLC + touchscreen interface - High operator safety with photoelectric safety curtain Applications: - Punching/cutting/forming operations requiring a large table - Series production with automated feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction body • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Counterbalance piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel Hodpfx Ajx N Rwrod Uefd • Touch LCD display • Motor reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Photoelectric safety curtain • Sealed oil tank with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety cover in front of the table • Custom-designed dies as requested ✅ TECHNICAL SPECIFICATIONS (CEHP 250) Capacity: 250 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2650 mm Press Height: 4600 mm Table Dimension: 2000×1100 mm Ram Face Size: 2000×1100 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 38,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, table width: 900 mm, table length: 1,800 mm, pressing force: 150 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, The eccentric press is a type of mechanical press, powered by a force generated via an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses, thanks to their rigid frames, provide high stability and process security, especially in applications requiring large tables and heavy dies. The CRONOSSTECH H-Type Eccentric Press 150 Ton is designed with a focus on stable operation in high-volume production, die protection, and operator safety. The monoblock frame, 8-way guided slide system, hydraulic overload safety, and automatic lubrication infrastructure ensure reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large table dimensions for oversized dies - Die/equipment protection with hydraulic overload safety - Precise guidance via 8-way slide + counterbalance piston - Controlled, user-friendly operation via PLC and touch screen - High operator safety with light curtain protection system Areas of Application - Punching/cutting/forming processes requiring large tables - Serial production with automatic feeding lines - Heavy die and high tonnage production processes Hfodsx N Ru Dopfx Ad Usd ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • Additional T-slotted bolster plate • 8-way guided slide • Adjustable stroke on single connecting rod • Counterbalance piston on slide • Full automatic fine lubrication system • PLC control system • Piano-type control panel • Touch LCD screen • Motor reverse function • Hydraulic overload safety • Motorized slide adjustment mechanism • Light curtain protection system • Enclosed oil gear unit • Dual-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover in front of the table • Dies custom-built to specifications ✅ TECHNICAL SPECIFICATIONS (H-TYPE – 150 TON) Capacity: 150 Ton Usable area of lower table: 900×1800 mm Usable area of upper table: 900×1800 mm Stroke: 200 mm (fixed) Nominal material thickness: 7 mm Speed (SPM): 60 Max. closed die height: 500 mm Min. closed die height: 380 mm Adjustment (slide): 120 mm Number of connecting rods: 2 Number of eccentric (crank) shafts: 2 Safety system: Hydraulic Electrical components (control panel): Siemens – Schneider Lubrication system: Automatic Screen / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 sets Mounting: Floor standing Frame type: Monoblock Motor power: 22 kW Motor speed (RPM): 1450 Approximate machine dimensions (L×W×D): 4500×3000×2000 mm Approximate weight: 20 Ton Note: Please contact us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, table width: 1,000 mm, table length: 2,000 mm, pressing force: 200 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, Eccentric presses are mechanical press types operated by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process safety for large table and heavy die applications, thanks to their rigid frame construction. CRONOSSTECH CEHP 200 – H-Type Eccentric Press 200 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. Featuring a monoblock frame, 8-guided ram system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 1000×2000 mm large table - Die/equipment protection with hydraulic overload safety - Controlled and user-friendly operation via PLC + touchscreen - High operator safety with light curtain protection (LEUZE) - Fast production change-over with 99 die memory settings Areas of Application - Punching/cutting/forming applications requiring a large table - Serial production with automated feeding lines - Heavy-duty dies and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch–brake • Additional bolted T-slotted plate • 8-guided ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display Hedpex N Ruqefx Ad Usfd • Motor reverse motion • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain protection • Enclosed oil reservoir with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety door at table front • Dies with custom specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower table usable area: 1000×2000 mm Upper table usable area: 1000×2000 mm Stroke length (fixed): 200 mm Nominal material thickness: 7 mm Strokes per minute (SPM): 25–45 Max. shut height: 600 mm Min. shut height: 480 mm Side window dimensions: 600×600 mm Adjustment (ram adjustment): 120 mm Number of connecting rods: 2 pcs Number of eccentric shafts (cranks): 2 pcs Safety device: Hydraulic Switchgear brands: Siemens – Schneider Lubrication system: Automatic Display / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 settings Mounting type: Floor standing Body type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approx. machine dimensions (L×W×D): 4600×3000×2000 mm Approximate weight: 28,000 kg Note: Please let us know if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, throat depth: 370 mm, table width: 700 mm, table length: 1,200 mm, stroke adjustment: 150 mm, pressing force: 300 t, stroke length: 200 mm, power: 30 kW (40.79 HP), Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, utilizing force generated through an eccentric mechanism. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for series production. Key advantages Stable stroke performance and high repeatability in mass production Operator safety-focused design (light curtain + safety systems) Low maintenance requirement with centralized automatic lubrication Production-ready operation with PLC control + two-hand/foot pedal control Areas of application Cold cutting and punching operations Cold forming applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-way guided slide system • Spheroidal graphite cast iron connecting rod and gear seats • Crankshaft and drive shafts made of 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Ray barrier finger–hand protection safety system • PLC control system • Dual hand/foot pedal control system • Mechanical safety system • Emergency reverse motor function • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies manufactured to required specifications • Eight-way guided slide system ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 Ton Throat depth: 370 mm Distance table–ram: 530 mm Slide–table distance: 650 mm Distance between uprights: 470 mm Ram adjustment (stroke setting): 150 mm Approximate press width: 2000 mm Approximate press depth: 2700 mm Hfsdpsx N Nfhefx Ad Usd Approximate press height: 3200 mm Front anchoring dimension: 940 mm Side anchoring dimension: 1440 mm Table bore diameter: Ø260 mm Table size: 700×1200 mm Die mounting hole diameter: Ø60 mm Ram size: 780×400 mm Table height from floor: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 SPM Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 13,200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, throat depth: 350 mm, table width: 700 mm, table length: 1,100 mm, stroke adjustment: 150 mm, pressing force: 250 t, stroke length: 160 mm, power: 22 kW (29.91 HP), Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suited for serial production. Key Advantages: - Stable stroke performance and high repeatability for mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready use with PLC control and dual hand/foot operation Applications: - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel structure frame • Four-sided guided slideways • Spheroidal cast iron connecting rod and gear seats • Crankshaft and driven shafts made of 4140 quenched and tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual solenoid safety valve • Manually adjustable stroke • Light curtain finger-hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system Hsdpfx Adex N Nfbe Usfd • Emergency reverse motor operation • Compliant with occupational safety regulations • In accordance with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die configured to your specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (250 TON) Capacity: 250 Ton Throat depth: 350 mm Table–ram distance: 520 mm Ram–table clearance: 630 mm Distance between side frames: 520 mm Ram adjustment (regulation): 150 mm Approximate press width: 2000 mm Approximate press depth: 2500 mm Approximate press height: 3100 mm Front anchorage dimension: 930 mm Side anchorage dimension: 1430 mm Table bore diameter: Ø250 mm Table size: 700×1100 mm Die mounting hole diameter: Ø60 mm Ram size: 670×380 mm Table height from floor: 810 mm Stroke adjustment: 20–160 mm Strokes per minute: 40 spm Motor power: 22 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 12,000 kg Note: If you require changes to the technical specifications, please inform us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales support are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, table width: 400 mm, table length: 600 mm, stroke adjustment: 45 mm, overall weight: 1,500 kg, pressing force: 35 t, stroke length: 70 mm, power: 3 kW (4.08 HP), punching force: 35 t, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 35 Ton is designed for stable performance in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for serial production. Key Advantages - Consistent stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement thanks to centralized automatic lubrication - Production-ready operation with PLC control and dual-hand/foot pedal controls Applications - Cold cutting and punching operations - Cold cropping applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided guideways • Spheroidal cast iron connecting rods and gear bearings • Crankshaft and transmission shafts made from 4140 tempered steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • Conforms to CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand safety system • PLC control system • Dual-hand/foot pedal control system • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • CE compliant ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate Hfedpsx N Nd Rsfx Ad Uod • Decoiler, feeder, and straightener • One set of dies tailored to your specifications • 8-sided slide guide ✅ TECHNICAL SPECIFICATIONS (35 TON) Capacity: 35 Ton Usable bolster size: 400×600 mm Stroke length: 0–70 mm Nominal material thickness: 2.5 mm SPM (strokes per minute): 120 Bolster–ram distance: 330 mm Adjustment (ram adjustment): 45 mm Bolster hole diameter: Ø130 mm Ram die shank diameter: Ø35 mm Safety lock: Mechanical safety lock Lubrication system: Automatic lubrication PLC: Included Safety barrier: Included Operation system: Pneumatic clutch–brake system Mounting type: Floor-standing Frame type: C-type steel construction Motor power: 3 kW Motor speed (RPM): 1450 Approximate machine dimensions (L×W×H): 1100×1400×1800 mm Approximate weight: 1500 kg Note: Please contact us for any modifications required in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 800 mm, table length: 1,100 mm, stroke adjustment: 180 mm, pressing force: 200 t, ram bore: 60 mm, power: 15 kW (20.39 HP), punching force: 200 t, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates by force generated through an eccentric mechanism in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type 200 Ton Eccentric Press is engineered for stable operation in cold forming applications. Its rigid steel frame construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for high-volume production. Key Advantages: - Consistent stroke performance and high repeatability in mass production - Operator-focused safety design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready operation with PLC control + dual-hand/foot control Application Areas: - Cold cutting and punching operations - Cold shearing applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES Hedjvtyx Iopfx Ad Ujfd • Steel frame construction • Four-way guided slide • Spheroidal cast iron connecting rod and gear bearings • Crankshaft and drive shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual-hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Complies with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD control panel (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One die set in requested specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Tons Throat depth: 340 mm Distance between table and slide: 500 mm Distance between slide and table: 600 mm Width between uprights: 510 mm Slide adjustment (shut height adjustment): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchoring dimension: 920 mm Side anchoring dimension: 1420 mm Table hole diameter: Ø240 mm Table dimensions: 680×1000 mm Die clamping hole diameter: Ø60 mm Slide dimensions: 620×350 mm Table height from floor: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approximate weight: 9200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE: This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, throat depth: 320 mm, table width: 920 mm, table length: 660 mm, pressing force: 160 t, ram bore: 55 mm, power: 15 kW (20.39 HP), punching force: 160 t, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are mechanical presses that operate with force generated via an eccentric mechanism and are used in cold forming operations such as punching, cutting, and forming with dies. Thanks to their high production speed and repeatability, they provide an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 150 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance for serial production. Key Advantages - Stable stroke performance and high repeatability in serial production - Operator safety-oriented design (light curtain + safety systems) - Reduced maintenance needs with centralized automatic lubrication - PLC control + dual hand/foot control for production-ready operation Application Areas - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame Hfsdpfx Aovtywdod Ujd • Four-sided slide guidance • Spheroidal cast iron connecting rod and gear bushings • 4140 quenched and tempered steel crankshaft and transmission shafts • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Dual-coil safety valve • Manually adjustable stroke • Finger and hand protection with light curtain safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • Meets CE standards ✅ OPTIONAL FEATURES • Anti-vibration mountings • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare die plate • Decoiler, feeder, and straightener • One set of die to customer specifications • 8-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Bed-to-ram distance: 500 mm Slide-to-table distance: 540 mm Distance between uprights: 500 mm Ram adjustment (stroke): 120 mm Approx. width: 1600 mm Approx. depth: 2280 mm Approx. height: 2750 mm Front anchoring size: 840 mm Side anchoring size: 1300 mm Bed bore diameter: Ø220 mm Table size: 660×920 mm Die mounting hole diameter: Ø55 mm Ram size: 600×290 mm Floor-to-table height: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1450 rpm Approximate weight: 7100 kg Note: If you require changes in technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 750 mm, table length: 1,000 mm, stroke adjustment: 140 mm, pressing force: 130 t, ram bore: 55 mm, punching force: 130 t, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are a type of mechanical press powered by the force generated through an eccentric mechanism, commonly used for cold forming processes such as punching, cutting, and die forming. With high production speed and repeatability, they provide an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 125 Ton is engineered for stable operation in cold forming applications. Its rigid steel welded body, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for series production. Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light barrier + safety systems) - Low maintenance requirement thanks to central automatic lubrication - Production-ready operation with PLC control + dual hand/foot controls Fields of Application: - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel welded frame • 4-sided slide guidance • Spheroidal cast iron connecting rod and gear bearings • Crankshaft and transfer shafts made from 4140 hardened steel • Central fully-automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual-coil safety valve • Manually adjustable stroke • Light barrier finger/hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock system • Emergency reverse motor movement • Occupational safety regulation compliant • CE-conformant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • 1 die set tailored to specifications • Eight-point slide guide ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 Tons Throat depth: 310 mm Distance table–slide: 500 mm Distance between slide and table: 510 mm Distance between uprights: 450 mm Slide adjustment (stroke adjustment): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchorage (footprint): 790 mm Side anchorage (footprint): 1250 mm Table hole diameter: Ø210 mm Hodevtyvgspfx Ad Uefd Table size: 630×820 mm Die clamping slot diameter: Ø55 mm Slide size: 500×250 mm Table height from floor: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: Please inform us if you require changes to the technical specifications. ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 670 mm, table length: 950 mm, drop-through hole in table: 180 mm, power: 7.5 kW (10.20 HP), punching force: 100 t, ram bore: 45 mm, stroke adjustment: 120 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 100 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver dependable performance suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light barrier + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot pedal control Application Areas Hfodpfxevtx Ins Ad Ujd - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • 4-sided slide guiding • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 tempered steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • CE safety compliant • Dual-coil safety valve • Manually adjustable stroke • Light barrier hand and finger safety protection system • PLC control system • Dual-hand/foot pedal control system • Mechanical safety system • Emergency reverse motor operation • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare table • Uncoiler, feeder, and straightener • One set of custom die as requested • 8-sided slide guiding ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Bolster–ram distance: 400 mm Slide–table distance: 465 mm Distance between side frames: 420 mm Ram adjustment (stroke setting): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchoring dimension: 710 mm Side anchoring dimension: 1135 mm Bolster hole diameter: Ø200 mm Bolster size: 600×780 mm Die mounting slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approximate weight: 4650 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are handled directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, drop-through hole in table: 180 mm, table width: 660 mm, table length: 860 mm, stroke adjustment: 110 mm, pressing force: 80 t, power: 5.5 kW (7.48 HP), punching force: 80 t, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates via a force generated by an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for mass production. Key Advantages: - Stable stroke performance and high repeatability in serial production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot control Typical Applications: - Cold shearing and punching operations - Cold forging applications - Metal die forming - High-volume production lines Hfedjvtx H Rspfx Ad Usd ✅ STANDARD FEATURES • Steel construction frame • Four-sided guided slide • Spheroidal graphite cast iron connecting rod and gear bushings • Crankshaft and transmission shafts made of 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Double-coil safety valve • Manually adjustable stroke • Finger–hand protection light curtain safety system • PLC control system • Dual-hand/foot control system • Mechanical locking system • Emergency reverse motor operation • Occupational safety regulation compliant • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounting pads • Touchscreen LCD panel (standard between 150–300 tons) • Hydraulic safety system (standard between 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One die set to requested specifications • Eight-way slide guides ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Ton Throat depth: 280 mm Bed–ram distance: 400 mm Slide–table distance: 420 mm Distance between side frames: 400 mm Ram adjustment (slide adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1735 mm Approx. press height: 2220 mm Front anchor dimension: 670 mm Side anchor dimension: 1040 mm Table hole diameter: Ø190 mm Table size: 540×740 mm Die clamping hole diameter: Ø40 mm Ram size: 370×230 mm Bed height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approximate weight: 4000 kg Note: Please inform us if you require modifications in the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are directly managed by CRONOSSTECH.