Used Table Drilling Machines for sale (69,079)

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system Itodpfx Asz Df Txodlol - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, 4-spindle adjustable vertical drilling machine, Camam brand Itedpfx Aozz Rpvedljl + 3 spindles to be revised

Condition: used, Year of construction: 2013, functionality: fully functional, input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, overall weight: 520 kg, We offer this used Bottero 710C glass drilling machine, manufactured in 2013. Model: 710C Serial number: GG710C-20596 Year of manufacture: 2013 Iedpfx Adezmwrnolstl Voltage: 400 V Frequency: 50 Hz Rated current: 8 A Weight: 520 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: new, bore capacity in steel (diameter) 50.0 mm throat 360 mm bore stroke 225 mm morse taper 4 MK table: 570 x 480 mm threading M 42 Stahl turning speeds 50-316 / 316-2200 U/min feed 0.08 - 0.50 mm/U column diameter 180 mm distance spindle /table max. 580 mm distance spindle/base plate max. 1185 mm total power requirement 3.0 kW weight 630 kg range L-W-H 1020 x 750 x 2340 mm Itsdpfxsxacc Se Adlel Scope of delivery - Keyed drill chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - Motorized table stroke - Coolant device - Touchscreen - Automatic tool ejector - Electromagnetic spindle feed - Thread cutting device - Initial filling with Shell Tellus 46 - LED machine light - Digital speed display - Digital drilling depth display - Height-adjustable protective cover

Condition: new, Year of construction: 2026, bore capacity in steel (diameter) 32.0 mm 35.0 mm bore stroke 150 mm M 22 (St 60) throat 300 mm 0.1 - 0.2 mm/U Iedpfx Asx Dngkjdletl MK 4 480 x 480 mm 80.0 - 1.170 U/min 0.90 / 1.35 kW 340 kg 800 x 1000 x 2000 mm Manufacturer's list price: 8.665 EURO Special price on request Equipment: - Column drilling machine - "V-belt drive" - infinitely variable speed adjustment - Manual automatic spindle feed - Thread cutting device * automatic feed reversal RS for thread cutting - pole-changing drive motor - depth scale and adjustable depth stop - Height-adjustable work table * Adjustment with hand crank - Right/left rotation of the drill spindle - Machined machine base incl. coolant device - Machine/work light - Folding drill spindle guard - Emergency stop button at the front - CE marking + instruction manual

Condition: used, Year of construction: 1997, Workbench Column Drilling Machine CINCINNATI PE 32 Year of construction: 1997 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Table travel X: 290 mm / Travel Y: 150 mm Speed variator by belt variator Iedpfozzv Udox Adletl Maxi height base/spindle nose: 500 mm Mini height base/spindle nose: 260 mm Throat depth: 300 mm Spindle sleeve diameter: Ø 80 mm Equipped with one cross table dimensions: L 430 x W 240 mm Voltage: 380 V Width: 900 mm Depth: 1100 mm Total height on base: 2000 mm Weight: approx 400 kg

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Iedpjvylh Usfx Adletl Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: good (used), Year of construction: 1955, Radial drilling machine, drilling machine, boom drilling machine -Projection: 2055 mm -Max. distance from machine table to spindle mount: 1700 mm -Conical mount: MK5 -Motor power: 7.5 kW Iodpod Enr Isfx Adljtl -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -Automatic feed: 0.037-2.0 mm/rev -Clamping surface: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg

Condition: new, bore capacity in steel (diameter) 32,0 mm throat 230 mm bore stroke 120 mm morse taper 3 MK table: 400x320 mm turning speeds 105 - 1725 U/min Itsdpow U U N Isfx Adlsl total power requirement 1,2 kW weight 245 kg range L-W-H 470x810x1710 mm Furnishing: - Compact, stable cast iron construction in a modern design - Infinitely variable speed control - is changed The speed is read on a digital display - Table height adjustment via rack and crank - Right and left rotation of the quill for thread cutting - Powerful 2-stage motor, speed range from 105 - 1725 rpm - Base plate with T-slots for clamping high workpieces - Safety switch with undervoltage release - The spindle runs in the precision ball bearing scope of delivery - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MK 3/2 - Digital speed display - LED machine light - Height-adjustable protective cover

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, spindle mount: MK 4, overall weight: 2,500 kg, drilling capacity: 40 mm, spindle speed (max.): 1,655 rpm, Radial Drilling Machine OOYA RE 1000 Radial Drilling Machine for Sale in Excellent Condition Iodowvufgjpfx Adljtl Manufacturer: OOYA Machinery Works Co. Ltd "JAPAN" Type: RE-1000A Speed ​​range 50% 12 Segments 32-1655 r/min (50 Hz) Projection 1000 mm Spindle holder MK 4 Drilling capacity in steel (diameter): 35 mm Drilling capacity in cast iron (diameter): 40 mm Arm vertical travel distance: 650mm Spindle diameter: 60 mm Column diameter: 320 mm Clamp base plate: 1020x650mm Clamping block: 450 x 650 x 500 mm ca Spindle diameter: 60 mm Column diameter: 320 mm Power: 3 x 200v 50Hz (Japanese voltage standard) Main motor: 2.2 kW Arm lift motor: 1kw Coolant pump motor: 50 watts Weight: 2.5 t Space requirement approx. 2.1 x 1.16 x 3 m If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, bore capacity in steel (diameter) 50.0 mm throat 370 mm bore stroke 250 mm morse taper 4 MK table: 600 x 500 mm threading M 42 Stahl turning speeds 40 - 2100 U/min feed 0.1 - 0.4 mm/U column diameter 200 mm distance spindle /table max. 600 mm distance spindle/base plate max. 1190 mm total power requirement 2.2 / 2.8 kW weight 670 kg range L-W-H 1020 x 750 x 2340 mm Scope of delivery - Keyed drill chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MK 4 / 3, MK 4 / 2 - Motorized table stroke Itsdpfsxaay Ijx Adljl - Coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine light - Initial filling with Shell Tellus 46 - Digital speed display - Digital drilling depth display - Height-adjustable protective cover

Condition: used, Colour: Green Empty weight: 6.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs.]: 3 - Table length [mm]: 2200 - Table width [mm: 1500 - X-axis travel [mm]: 2500 - Y-axis travel [mm]: 1400 - Z-axis travel [mm]: 1000 - Spindle diameter [mm]: 100 - Options: Digital readout - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Itsdpfjwfpbbjx Adlel Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1983, machine/vehicle number: 508323, 21-spindle, pitch 32 mm Tool holder M 10 external thread Spindle spacing max. 640 mm Portal clearance max. 1056 mm Stop length 2500 mm with 4 pivoting stops Drilling unit with 2.2 kW motor Drilling head swiveling, drilling from below Height adjustment max. 80 mm Drilling depth max. 80 mm Ex works, from Seevetal location, as inspected Subject to prior sale Iedpfx Adodardxeletl

Condition: new, bore capacity in steel (diameter) 50,0 mm arm length 350 - 1.590 mm workpiece height max. 645 - 1.240 mm Itjdpfx Aexaad Tsdlsl turning speeds 25 - 2000 U/min spindle taper MT 5 MK base plate 980 x 1.600 mm threading 42 M quill stroke 320 mm total power requirement 4,0 kW weight of the machine ca. 3.500 kg. range L-W-H 2450 x 980 x 2840 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 32,0 mm arm length 310 - 820 mm workpiece height max. 370 - 870 mm turning speeds 75 - 1220 U/min spindle taper MT 4 MK base plate 825 x 690 mm threading 24 M quill stroke 250 mm quill feed 0,1/0,16/0,25 mm/U travel x / y 500 / 510 mm total power requirement 2,25 kW weight of the machine ca. 1200 kg. range L-W-H 1470 x 750 x 2100 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting Itjdpfx Adjxabrlolel - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: used, Year of construction: 1992, bore capacity in steel (diameter) 32 mm throat 280 mm bore stroke 145 mm taper MK 3 MK Ijdpfx Aez Dkzbjdlstl table-size 540 x 480 mm feeds 0,08 bis 0,32 mm/U turning speeds 180 - 2000 U/min total power requirement 3,0 KW weight of the machine ca. 0,9 t dimensions 1,2 x 0,8 x 2,4 m Column drilling machine with: - Power feed - Thread-cutting attachment - Coolant pump - Machine light - Incl. machine vice - Emergency stop device

Condition: new, bore capacity in steel (diameter) 32,0 mm throat 255 mm bore stroke 120 mm morse taper 4 MK table: 385 x 335 mm turning speeds 80 - 2130 U/min total power requirement 1,1 / 2,2 kW weight 125 kg range L-W-H 460 x 900 x 1730 mm Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Iedpfoxaaqgox Adletl Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyless chuck 1 - 16 mm / B 18 - Cam switch for right-left rotation - Cross line laser device - T-nuts - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 50,0 mm arm length 320 - 1.220 mm workpiece height max. 330 - 1.170 mm turning speeds 25 - 2000 U/min spindle taper MT 5 MK base plate 1300 x 980 mm threading 42 M Itedpfx Adsxaaabolel quill stroke 335 mm total power requirement 4,0 kW weight of the machine ca. 3000 kg. range L-W-H 2035 x 1000 x 2830 mm Furnishing: - Large-sized base plate, ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good gliding ability of the drill head on the boom - sanded surface Scope of delivery: - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 60,0 mm arm length 350 - 1.600 mm workpiece height max. 665 x 1.250 mm turning speeds 38 - 2.000 U/min spindle taper MT 5 MK base plate 960 x 1.760 mm threading 42 M quill stroke 325 mm total power requirement 4,0 kW weight of the machine ca. 3.800 kg. Iodpfx Adexaa H Ueletl range L-W-H 2.600 x 1.100 x 2.770 mm scope of delivery : - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - Frequency converter - Digital speed display - lift motor - hydraulic motor - Height-adjustable protective cover - operating tool

Condition: good (used), table mounting size: 400 x 1500 mm table movement x: 1130 mm table movement y: 320 mm table movement z: 430 mm spindle taper: ISA 50 spindle turning speed range: Horizontal-/Vertikalspindel 32-1500/25-1200 rpm carriages longitudinal and cross: 15 - 600 mm/min Isdpeg A Inwefx Adljtl carriages vertical: 6 - 240 mm/min space needed: 4000 x 1250 x 4100 mm weight: 12000 kg

Condition: used, Year of construction: 1992, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 170 mm 4 speeds 60 - 1600 U/min table-size 570 x 480 mm total power requirement 1,6 kW weight 650 kg dimensions 1200 x 800 x 2200 mm Features: - Automatic feed - Coolant device - Infinitely variable speed control Isdpsvuz T Nefx Adljtl - Adjustable fixed depth stop - Machine light - Drill chuck

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 19823 i 19251, input frequency: 50 Hz, input current: 116 A, working width: 3,100 mm, total width: 6,617 mm, total length: 6,900 mm, total height: 2,550 mm, overall weight: 11,000 kg, input voltage: 380 V, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, type of input current: three-phase, actuation type: electric, Equipment: CE marking, documentation/manual, TECHNO KERNEL FD I SD – a line of 2 through-feed drilling machines. Each machine has 6 upper and 6 lower drilling heads, with 2 independent motor units for each. On each unit, it is possible to install an assembly with 11 vertical spindles, arranged either along the X-axis or the Y-axis with a 32 mm spacing, or assemblies for dedicated machining operations. Isdpfx Aezyrpnsdljtl The first machine also has two horizontal drilling units, each consisting of 2 independent assemblies equipped with 11 spindles with a 32 mm spacing. In the second machine, instead of the horizontal spindles, there are 4 glue and dowel insertion units installed on each side. It is possible to load the components manually, or to connect the machine to automated loading and unloading systems for operation in a production line.

Condition: used, Year of construction: 2019, operating hours: 2,294 h, functionality: fully functional, machine/vehicle number: 0-250-71-6845, feed length X-axis: 3,050 mm, feed length Y-axis: 850 mm, feed length Z-axis: 70 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 15 m/min, working width: 850 mm, total width: 1,984 mm, total length: 2,920 mm, total height: 1,895 mm, We offer a well-maintained HOMAG DRILLTEQ V-200 vertical CNC drilling and routing centre, manufactured in 2019. The machine was purchased new and has been used exclusively by our company. Our production volume is relatively low, and the machine has not been operated continuously or in two-shift production. It has typically been used for approximately 3–4 hours per working day. The machine is fully operational and currently in production. It can be inspected and tested under working conditions at our premises in Kaunas, Lithuania. A video of the machine in operation can be provided upon request. Key information: Manufacturer: HOMAG Model: DRILLTEQ V-200 Year of manufacture: 2019 Ijdpfx Ajzzwl Dedletl Condition: Used, well maintained and fully operational Purchased new and owned by one company Approximately 145,105 parts processed Main operating time: approximately 2,294 hours HOMAG powerTouch control system Used in a small-scale, single-shift production environment Price: EUR 38,000 net. VAT may apply depending on the buyer’s VAT status and country of destination. Location: Kaunas, Lithuania For further information, technical specifications and additional photos, please call +370 655 51230.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Point to point Through-feed CNC boring machine HIRZT MERIS K2, Year 2010 - Working width up to 870mm - Working length, no limit - Working thickness up to 40mm - Configuration: 14 + 4 + 2 pcs. drilling units + routing unit 5 sides drilling - Automatic panel positioning Itedpfx Asz Ag E Nsdljl - Automatic unloading system to return the panel to the operator or move forwards as a through-feed machine. Machine ready for loading M: 0030 6934 522 577 Sotiropoulos Nick

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Iedez Akbhopfx Adljtl Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates