Used briquetting presses for sale (101)

Condition: excellent (used), Year of construction: 2021, CATALOG NUMBER 7852 Technical specifications: - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 1000 mm - Throughput: approx. 110 kg/h - Automatic machine operation Gjdex Hhzvepfx Ah Deuk - Oil cooler - Motor: 7.5 kW - Dimensions (L/W/H): 1800x1100x1500 mm - Weight: 730 kg ADVANTAGES – Unpainted – Italian manufacture – Used briquetting machine – Perfect condition, year of production: 2021 Net price: 46,900 PLN Net price: 11,170 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Briquetting plant consisting of: * Spänex filter tower with rotary valve * 2 x extraction fans * Spänex SHB 250 K1 briquette press The filter tower extracts the material from the production line, where it is transported to the briquetting press's material silo via a rotary valve and another fan. Material silo: 4 m³ fan: 11 & 4 kW Guodpfxsxp Izrj Ah Djk power: approx. 6 briquettes/min

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. Gusdpfowyc H Tsx Ah Dok General Features: - Robust construction - Very user-friendly and economical to operate - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Circuit diagram - CE compliance - Operating manual Technical Data: - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Hydraulic tank capacity: approx. 180 liters - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Year of construction: 2008, operating hours: 3,520 h, functionality: fully functional, briquette diameter: 65 mm, Equipment: emergency stop, Briquetting Press Höcker Polytechnik - Model Brik Star C11-18 - Year of manufacture 11/2008 - Throughput capacity 130 - 160 kg/h - Operating hours 3520 - Motor 11 kW - Operating manual - Conical discharge with auger Gusdpoxztgdjfx Ah Dok - Additional oil cooler - Light barrier - Test run on site possible upon request

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Hopper diameter: 1100 mm Hopper height: 910 mm Hopper capacity: 0.89 m³ Throughput: 60-80 kg/h Power supply: 400 V Motor power: 7.5 kW Safety switch Overall dimensions: Length: 1670 mm Width: 1100 mm Godpexzqmzsfx Ah Deuk Height: 1500 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale: Gusdpfx Ahex Ap Ruo Dek RUF briquette packaging line, built in 2017 by Koch Robotersisteme. The system can be connected to up to 9 RUF R600 briquetting machines. Packaging capacity: 4.5–5 t/h. Current price is approx. €400,000, which is 50% of the new value without briquetting presses. RUF briquetting machines are listed in a separate auction.

Condition: excellent (used), Catalogue number 7737 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1000 mm - Throughput: approx. 70 kg/h - Automatic machine operation Gedjxbr I Hepfx Ah Djuk - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg ADVANTAGES – Italian manufacture – Used briquetting press – DTR technical documentation – Condition: very good Net price: 34,900 PLN Net price: 8,300 EUR (based on the rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2006, functionality: fully functional, total width: 1,900 mm, total height: 1,800 mm, total length: 2,500 mm, briquette diameter: 80 mm, overall weight: 2,400 kg, type of input current: three-phase, oil tank capacity: 600 l, – after technical inspection – Italian production – year of production 2006 Gedpfxov T Uphs Ah Deuk – DTR TECHNICAL PARAMETERS: – briquette Ø: 80 mm – max. briquette length: 80 mm – efficiency: 350 kg/h – engine power: 27.5 kW – hydraulic crush: 1400 kg/cm2 – max. operating force: 150 bar – oil capacity: 600 l – container diameter: Ø 1200 mm – container height: 90 cm – dimensions (length/width/height): 2500 x 1900 x 1800mm – net weight: 2400 kg

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Guedpfx Ahjlht H Eo Dok Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: ready for operation (used), Year of construction: 1996, Used Comafer 50/40 briquetting press. The briquetting press has undergone a complete overhaul. Gjdpfx Ajxzu Rdsh Douk

Condition: excellent (used), functionality: fully functional, BRIQUETTING machine , HYDRAULIC , AUTOMATIC , model POR STANDARD second hand machine Guodpfsw E Iyisx Ah Djk working conditions : Excellent briquette cutter system CE mark : Yes briquett diameter mm. 65 briquett length mm.50 / 300 production from 60 kg. to 90 kg./hour motor power Hp 7,5 net weigth kg. 800 overall dimensions cm.195 x 110 H=cm.150 volt. 380/50

Condition: excellent (used), Year of construction: 2019, operating hours: 23,666 h, functionality: fully functional, RUF Lignum R6 briquetting press Year of manufacture: 08/2019 Operating hours: 23,000 hrs Price: 49,000.00 EURO + VAT We have 7 RUF briquetting presses for sale: Lignum R6 2019, 23,000 operating hours, net price: 49,000 euro Lignum R6 2019, 23,000 operating hours, net price: 49,000 euro Lignum R6 2019, 6,800 operating hours, net price: 59,000 euro Lignum R4 2021, 13,000 operating hours, net price: 59,000 euro Lignum R4 2021, 13,000 operating hours, net price: 59,000 euro Lignum R4 2021, 12,000 operating hours, net price: 59,000 euro Lignum R4 2021, 12,000 operating hours, net price: 59,000 euro An automatic briquette packaging system is offered in a separate listing. Gujdpfx Aox Ap Iysh Djk

Condition: excellent (used), CATALOG NUMBER 7153 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper dimensions (H/W): 920x870mm Gujdpfxopu Avmj Ah Dok - Output: approx. 110kg/h - Automatic machine operation - Oil cooler - Oil pre-heating - Inspection window - Motor: 7.5kW - Dimensions (L/W/H): 1750x1300x1460mm - Weight: 825kg ADVANTAGES – Unpainted – Italian production – Used briquetting press – Very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR exchange rate (Prices may vary in case of significant fluctuations)

Condition: used, Technical data: Briquette diameter: 70 mm Briquette length: 70 mm Gjdexxxawjpfx Ah Dsuk Hopper diameter: 1200 mm Hopper height: 1000 mm Hopper capacity: 1.13 m³ Throughput: 70–120 kg/h Power supply: 400 V Motor power: 11 kW Safety switch

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Godjtnz Ttjpfx Ah Deuk Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2010, Capacity 180 - 300 kg/h Diameter of the briquets 50 mm Gsdpfxsxy S E No Ah Dsuk 0,3 m³ lubrication pump 1,0 kW engine output 15 kW

Condition: new, Year of construction: 2025, operating hours: 6 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * Gusdpjgl Nlmefx Ah Dsk * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round Guodexa Ephjpfx Ah Dok - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: new, Year of construction: 2024, your benefits Sturdy press mechanism with low-wear, chrome-plated tongs Pressing chamber wear bush Pre-compressor with end-position-sensed cylinder and screwed cover Control box with SPS-control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on stable base frame with rubber feet Godpfx Ahecnz U Ej Douk Briquette quantity monitoring Robust construction, low-maintenance technology, little space requirement: The machines of the C-series are particularly suitable for small and medium-size enterprises, whose required throughput does not exceed 50-80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, e.g. wood, polystyrene, foam, paper or biomass. All machines are available as left- or right-hand version. The mounting on a stable base frame ensures a quick installation and makes mobile use possible. Briquette diameter (mm) 50 Throughput capacity up to (kg/h) 50 (depending on material) Hydraulic motor (kW) 5,5o Screw motor (kW) 0,55 Oil quantity (litres) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: temperature-controlled hydraulic unit, complete valve control, pump motor for long running times Briquette length monitoring: regulates the length of the briquette to a constant level Pressing area wear bush: Prevents wear in the pressing area Location: Ex works - free loading

Condition: new, Year of construction: 2025, Good, used demonstration machine Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Guodpfxed Nm Sie Ah Dsk Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: excellent (used), Catalogue number 7811 TECHNICAL DATA - Compression force: hydraulic - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 990 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Inspection window - Motor: 5.59 kW - Max. operating pressure: 150 bar - Dimensions (L/W/H): 1700x1350x1550 mm - Weight: approx. 1100 kg ADVANTAGES – Italian manufacture – Used briquetting press – Inspection window – Very good condition Net price: 35,900 PLN Gsdpfoxxlb Uox Ah Douk Net price: 8,550 EUR based on an exchange rate of 4.2 EUR (Prices may change due to exchange rate fluctuations)

Condition: new, Year of construction: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for plants with required throughput rates of up to 150 kg/h. The stable press housing enables the production of high-strength briquettes - from materials such as wood, polystyrene, foams, light metals, paper or biomass. Numerous additional options can be implemented, e.g. oil cooling for multi-shift operation. All machines are available as left- or right-hand version. Mounting on a stable base frame ensures fast installation and makes mobile use possible. User-friendly operation thanks to Siemens PLC control In order to live up to our performance promise, we design and produce all control cabinets ourselves at our Ilsfeld site and equip them with well-known international components. This guarantees highest quality with compact design. The used PLC-control from Siemens is perfectly adapted to the requirements of the briquetting process. Impurity-resistant screw conveyor due to cardanic suspension The screw conveyor, which transports the material into the pre-compressor of the briquetting press, is suspended on a cardan joint. This prevents interfering materials from causing damage to the screw conveyor. As is so often the case, however, it always depends on the specific application which suspension is chosen. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil quantity (liters): 250 Guedpjil Hggsfx Ah Dok Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, operating hours: 8 h, One machine - ready produced Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Gujdpfjxfwdsx Ah Dok Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2024, Compact design, high reliability and an excellent price-performance price-performance ratio: these are the advantages of this machine machine, which is perfectly suitable for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a sturdy base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm hopper height: 1010 mm hopper capacity: 1,1 m³ driving power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil capacity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome plated tongs Precompressor with end-position-suspended cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Gujdpfx Ahobtnf Ee Dek Briquette quantity monitoring Automatic On - Off Location: 54634 Bitburg

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Guedpfx Ajtnz Hboh Dek Location: 54634 Bitburg