Used machining centers (vertical) X-axis travel 1700mm for sale (165)

Condition: excellent (used), Year of construction: 2013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, table width: 1,200 mm, table length: 4,500 mm, rotary table diameter: 1,250 mm, NC Rotary table 1250 mm with 50 Rpm Full C-Axis  360.000 with HIGH TORQ Drive HSK-100 with 90 kW and 15.000 Rpm 5 Axis simulteneous package Last service in 2023  X - Travel: 4000mm Y - Travel: 1200mm Z - Travel: 1300mm A - Axis: 105° B - Axis: 360000° Table Length: 4500mm Table Width: 1200mm Table Ø: 1250mm Spindle Taper: 100ISO/Bt/Mk Power on spindle: 90kW Speeds / ranges: 15000Rpm ATC / revolver: 60 Coolant through spindle / Bar:70 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 10500mm Width: 4500mm Height: 4100mm Hedpfxjx Sqf Io Al Djfk Weight: 34000kg

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 40,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 40,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,100 mm, total length: 6,500 mm, total width: 3,100 mm, table width: 750 mm, table length: 2,900 mm, table load: 2,800 kg, spindle motor power: 27,000 W, 3-axis CNC machine (VMC) Hedelius - BC80 /2300 Hjdpey Enzajfx Al Dsfk Make: Hedelius Type: BC80 /2300 Control: HeidenHain iTNC530 Year: 2005 X - Travel: 2340mm Y - Travel: 800mm Z - Travel: 600mm Table Length: 2900mm Table Width: 750mm Table load: 2800 Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 27kW Speeds / ranges: 8000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 6500mm Width: 3100mm Height: 3100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 1,800 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 420 mm, feed length Z-axis: 480 mm, feed rate X-axis: 45,000 m/min, feed rate Y-axis: 45,000 m/min, feed rate Z-axis: 45,000 m/min, total height: 3,100 mm, total length: 4,300 mm, total width: 3,100 mm, table width: 420 mm, table length: 2,000 mm, rotational speed (max.): 8,000 rpm, overall weight: 5,000 kg, spindle motor power: 16,000 W, 3-axis CNC machine (VMC) Hedpfxsy Ewnce Al Djfk Hedelius - MC40/1800 MACH-ID 9596 Make: Hedelius Type: MC40/1800 Control: HeidenHain iTNC530 Year: 2005 X - Travel: 1800mm Y - Travel: 420mm Z - Travel: 480mm Table Length: 2000mm Table Width: 420mm Feed rate X-Axis: 45000mm/min. Feed rate Y-Axis: 45000mm/min. Feed rate Z-Axis: 45000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 16kW Speeds / ranges: 8000Rpm ATC / revolver: 20 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 4300mm Width: 3100mm Height: 3100mm Weight: 5000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, Vertical machining center Deckel Maho DMF 220 Linear Year of manufacture: 2008 Control: Siemens 840 D Technical specifications: CNC control: Siemens Sinumerik 840D Number of axes: 3 X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Max. clamping height: 600 mm Table size (LxW): 2,600 x 600 mm Max. table load: 2,200 kg Guideway type: Linear guide Max. power: 35 kW Tool holder: SK40 Tool magazine capacity: 60 Tool change time: 9.6 s The machine was in active serial production until recently and was predominantly used for machining steel and aluminum. Equipment: ⦁ Partition wall for setup time optimization (parallel machining / setup in one cabin half) ⦁ Conveyor belt filter system for coolant processing Hfodpey Nbbzofx Al Dok ⦁ Automatic tool changer ⦁ Generous working area for complex components

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. They can be widely used both with simple, as well as complex multidimensional processes Hfjdpfsfz Dmfox Al Dsk They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Condition: used, Year of construction: 2005, Hedelius C60-2500 CNC machining center - Spindle running time: 9,546 h Manufacturer: Hedelius Type: C60-2500 Year of manufacture: 2005 Control system: Heidenhain Location: Bremen Hfjdpjzc Rlhjfx Al Dok Technical data: Travel in X-axis: 2,500 mm Travel in Y-axis: 620 mm Travel in Z-axis: 500 mm Table clamping area: 3,000 x 600 mm Spindle speed: 8,000 rpm Rapid traverse / Feed rate: up to 30,000 mm/min Machine weight: approx. 12,000 kg Operating hours: Control system ON: 40,045 h Machine ON: 44,393 h Program running time: 10,019 h Spindle running time: 9,546 h Equipment: Heidenhain CNC control system 4th axis: See photos (this was installed on this machine about 10 years ago and then stored. None of the current operators know how or if the device works.) Full enclosure Electronic handwheel Coolant system Work area lighting Chip tray The machine is in operation and can be inspected while powered on by appointment. With an X-axis travel of 2,500 mm and a table clamping area of 3,000 x 600 mm, the machine is particularly suitable for machining long workpieces in mechanical engineering, toolmaking, jig and fixture construction, and steel construction. The relatively low spindle running hours of only 9,546 hours are particularly noteworthy. The Hedelius C60 stands for robust German engineering quality, high precision, and a long-lasting design. Inspection is possible at any time in Bremen by appointment. _____ Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial businesses and without warranty.

Condition: excellent (used), Year of construction: 2001, Control: Heidenhain TNC 410 Worktable Table size: 2030 x 500 mm Travel distances: X-axis: 1700 mm Y-axis: 600 mm Hjdpfxjy Imqxs Al Dsfk Z-axis: 600 mm Spindle speed range (stepless): 60 – 6000 rpm Rapid traverse: 25 / 25 / 20 m/min Number of tool stations: 22 tools Dimensions: 4.2 x 2.3 x 2.7 m Machine weight: approx. 10,000 kg

Condition: like new (used), Year of construction: 2007, Table size 2200 x 1000 mm Longitudinal travel 2050 mm Cross travel 1150 mm Vertical travel 760 mm Spindle speeds 12.000 rpm Spindle taper ISA 40 Power feed 1 - 8.000 mm/min Hfsdpfxsg Tdavj Al Dok Rapid speed Z-axe 15 m/min Rapid speed X - Y axis 20 m/min Control Heidenhain IT 530 NC Tool change 40 pcs

Condition: good (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, spindle speed (max.): 8,100 rpm, spindle motor power: 22 W, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, Travel distances X-axis: 2134 mm Y-axis: 813 mm Z-axis: 762 mm Distance spindle nose – machine table (~ max.): 864 mm Spindle nose to table (~ min): 102 mm Spindle Hfsdpfx Aoy H I S Ujl Djk Max. rated power: 22.4 kW Max. speed: 8100 rpm Max. torque: 122.0 Nm at 2000 rpm Table Length: 2134 mm Width: 711 mm Max. table load capacity (evenly distributed): 1814 kg Tool changer 30+1

Condition: good (used), Year of construction: 2005, Ref. -No.: 10627 Manufacturer: AUERBACH Type: IA 5B 3200 RT Year of construction: 2005 Type of control: CNC Control: Heidenhain 530 Storage location: Halbrstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 2000 mm Z-Travel: 1600 mm B-Axis: 360 ° C-Axis: 360 ° Spindle Taper: SK 50 Rotary Table (Lxw): 2500 x 2000 mm Table Load: 20.000 kg Tool Piece Magazine With: 100 Pcs./pcs. Operating hours: 75.377 H Spindle hours: 28.246 H Machine length: 7300 mm Machine width: 7700 mm Machine Height: 4350 mm Weight Of The Machine Ca.: 28 t Further information: - with H / V head Hodpfx Aloy Ed R De Djfk Machine can be viewed under power by arrangement

Condition: good (used), Year of construction: 2009, operating hours: 21,955 h, functionality: fully functional, HEIDENHAIN iTNC530 controller Table dimensions 5300 x 750 mm Maximum table load 4500 kgs X-axis travel 4500 mm (pendulum operation) Y-axis travel 800 mm Z-axis travel 620 mm Spindle nose to table surface 325 - 925 mm Spindle speed 12000 rpm (Kessler Celox motor spindle) Torque 183 Nm Spindle taper HSK63 ATC 56-position magazine Middle wall in working area - pendulum operation possible Rapid traverse X/Y/Z = 30/40/40 m/min Power consumption 25 kVA Weight 21000 kgs Space requirement L x W x H = 10.4 x 4.2 x 3.2 m Equipment, accessories - Large chip conveyor - Large inclined water system 1800 l Internal coolant system and flushing pump - 2x special-design extraction systems – without piping - Machine hood with automatic roller blind Hfsdpfx Asyugupel Dsk - Machine doors with automatic drive and Rotoclear window - Water system 3 x 2 m, position to the left of or behind the machine - Hydraulic clamping unit for machine interior - Blum RMP measuring probe - Separation wall – pendulum operation possible - Hedelius service complete - Pipes for machine cooling, flushing, and pneumatics replaced in 07/2024 - Vises and fixtures on machine table are not delivered with the machine. The machine is no longer in production (it has been professionally stored) and was dismantled in fully functional condition.

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Heidenhain, controller model: ITNC 530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hedelius C60 Control system: Heidenhain iTNC 530 Year of manufacture: 2006 Travel ranges: X-axis: 2000 mm Y-axis: 620 mm Z-axis: 520 mm Clamping area: 2500x600 mm Table load: approx. 2000 kg Tool holder: SK 40 Tool magazine: 30 positions Hfjdpezbzqxofx Al Dsk Spindle speed: 20 - 8000 rpm Accessories: - Coolant filtration system, 600 l - Internal cooling - Chip conveyor - Electronic handwheel - Magnetic chuck, 1200x600 mm - Table-mounted control panel TS27R (tool measurement) - Measuring probe RENISHAW RMP 60 - Glass scales in all axes Special features: The magnetic chuck is fully integrated into the Heidenhain control system and can be conveniently operated both via the central machine control panel and via the controls on the machine doors. This enables short setup times and easy, safe operation directly at the machine. Subject to changes and errors in technical data and specifications, as well as prior sale.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 2,660 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 10,000 rpm, number of axes: 5, This 5-axis SPINNER U5-2520 was manufactured in 2016. It features an impressive X-axis travel of 2660 mm, Y-axis travel of 520 mm, and Z-axis travel of 460 mm. The machine is equipped with a spindle speed of 10,000 rpm and an automatic tool changer with 2x52 positions. If you are looking to get high-quality machining capabilities, consider the SPINNER U5-2520 vertical machining centre we have for sale. Contact us for further details. Hodpfxoy Efxio Al Dofk • B-axis: +110° / -90° • ATC: 2 x 52 tools Technical Specification Taper Size SK 40

Year of construction: 2002, condition: excellent (used), X-4.000 / 2x1.750 , Y-900 , Z-700 ,SK 40 , 60-6.000 U/min , 2 Werkzeugwechsler für 72 Werkzeugaufnahmen, Siemens 840 D , Heidenhain Meßsystem , 3D- Meßtaster Renishaw , BLUM - Werkzeugbruchkontrolle , Hfsdpogb Rq Sofx Al Dok Späneförderer , Bandfilteranlage

Condition: good (used), Year of construction: 2017, travel distance X-axis: 1,600 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 820 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 18,000 m/min, controller model: HARTROL PLUS 1 (MITSUBISHI), table width: 820 mm, table length: 1,750 mm, table load: 2,200 kg, number of slots in tool magazine: 40, Hartford HCMC-1682 Vertical Machining Center – Year 2017 The Hartford HCMC-1682 vertical machining center represents an ideal solution for medium and large-size mechanical machining operations that require high structural rigidity, reliability, and precision. Thanks to its robust construction and ISO 50 spindle, this machine is particularly suitable for roughing and finishing operations on steel, cast iron, and high-strength materials. Equipped with a Hartrol Plus 1 (Mitsubishi) CNC control, the machining center offers generous travels of 1,600 x 820 x 820 mm, allowing the machining of large-size components with a weight of up to 2,200 kg on the table. The two-range speed spindle, with a power of up to 18.5 kW and a maximum speed of 6,000 rpm, guarantees high chip removal performance and considerable torque at low speeds. The machine is equipped with a 40-position automatic tool magazine, through-spindle high-pressure coolant, chip conveyor, and a dedicated spindle cooler, making it ready for intensive and continuous production. Main technical features: Hartrol Plus 1 (Mitsubishi) CNC control X/Y/Z axis travels: 1,600 / 820 / 820 mm Table: 1,750 x 820 mm Table load capacity: 2,200 kg ISO 50 spindle Spindle speed: 6,000 rpm Spindle power: 15 / 18.5 kW Tool magazine: 40 positions Rapid traverse rates X/Y: 20 m/min Rapid traverse rate Z: 18 m/min Included accessories: Chip conveyor Coolant tank with pumps High-pressure coolant through spindle Spindle coolant cooler Hedpfx Aljzaapke Dsfk Manuals, electrical diagrams, and CE declaration

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, operating hours of spindle: 44,377 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is fully operational and can be inspected while powered on. Deckel Maho DMF 250 Year of manufacture: 2004 X-axis: 2500 mm Y-axis: 920 mm Z-axis: 820 mm B-axis: +/- 105° Work table: 3100 x 900 mm Spindle: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 tools Control system: Heidenhain iTNC 530 Equipped with: - Chip conveyor - Coolant system through spindle, 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (L x W x H): 6000 x 3800 x 2950 mm Hfjdpfx Aljzaq Ecj Dsk Machine weight: 25,000 kg Jakob Friedrich J. Friedrich Werkzeugmaschinen Mistelstrasse 18 75334 Straubenhardt Warehouse: Auf der Hub 10 76307 Karlsbad-Ittersbach

Condition: like new (used), Year of construction: 2014, operating hours: 8,815 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, rotational speed (max.): 15,000 rpm, spindle nose: BT40, number of slots in tool magazine: 40, 5-AXIS MACHINING CENTER YCM TCV 3000A-5AX Hfodpfjzcx A Uex Al Dek TECHNICAL SPECIFICATIONS • Model: YCM TCV 3000A-5AX • Year of Manufacture: 2014 • Control: Heidenhain (5-axis simultaneous) • Travel (X / Y / Z): 3,000 x 800 x 800 mm • B-Axis (Swivel Head): 110º • C-Axis (Rotary Table): Ø 800 mm • Spindle Speed: 15,000 RPM • Tool Taper: BT40 Big Plus • Tool Changer (ATC): 40-station magazine • Through-Spindle Coolant: 20 Bar • Probing Systems: Renishaw RMP60 workpiece probe & Renishaw TS-27R tool setter • Workzone Divider: Partition wall for pendulum machining • Chip Management: Chip conveyor included • Usage: General subcontracting / job shop environment. PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, total height: 1,800 mm, total width: 600 mm, table load: 2,000 kg, overall weight: 2,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 20,000 W, product length (max.): 1,300 mm, number of axes: 3, This 3-axis Sure First QM-1836 was manufactured in 2011. It features a table dimension of 1800 x 1200 mm and impressive axes strokes of 1800 x 1300 x 600 mm. The machine has a maximum rotation speed of 15000 rpm and a forward speed of 20000 mm/min. If you are looking to get high-quality machining capabilities, consider the Sure First QM-1836 vertical machining centre we have for sale. Contact us for further details. • Table dimensions (X/Y): 1800 x 1200 mm Hfsdpfx Aey Amkhsl Dok • Forward speed: 20000 mm/min

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 920 mm, controller manufacturer: HEIDENHAIN, total height: 7,870 mm, total width: 3,650 mm, table load: 9,000 kg, overall weight: 34,000 kg, spindle speed (max.): 3,800 rpm, product length (max.): 3,760 mm, number of axes: 3, This 3-axis HARTFORD HB 3150/S vertical machining centre was manufactured in 2005. It features a generous table size of 3000 x 1500 mm and impressive axes strokes of 3000 x 1500 x 920 mm. The machine has a maximum rotation speed of 3800 rpm and a forward speed of 10000 mm/min. If you are looking to get high-quality machining capabilities, consider the HARTFORD HB 3150/S machine we have for sale. Contact us for further details. Hedpfxsy Al S Rs Al Defk • Table dimensions (X/Y): 3000 x 1500 mm • Forward speed (feed rate): 10000 mm/min • Power requirement: 50 kVA

Condition: ready for operation (used), Year of construction: 2007, operating hours: 37,292 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 10,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,500 g, number of axes: 3, This 3-axis HEDELIUS C60 - 2000 vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine is equipped with a powerful 18.5 kW spindle and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the HEDELIUS C60 - 2000 machine we have for sale. Contact us for further details. • Pendulum operation area: 2 × 775 × 620 mm • Main spindle torque: 165 Nm (optional 198 Nm) • Tool holder: HSK A63 • Max tool length: 330 mm Hfsdpfsyz Sptox Al Dsk • Max tool diameter: 80 mm • Tool change time: approx. 3.0 s • Chip-to-chip time: approx. 6.0 s • Table: cast iron machine table with 5 T-slots DIN 650-18 • Coolant system: central coolant through spindle • Coolant tank capacity: 780 liters • Filter grade: 25 µm • Filter capacity: 130 l/min • Pump A: 20 bar / 30 l/min • Pump B: 2.5 bar / 150 l/min • Electrical connection: 3 × 400 V, 50 Hz • Total connected load: 20 kVA • Compressed air requirement: minimum 7 bar • Weight: 10500 kg • Machine enclosure: full enclosure with electric roller door • Positioning system: glass scales on X/Y/Z axes • Drive system: digital AC servo motors with ball screws • Programming: Heidenhain plain text and DIN/ISO Additional equipment • Chip conveyor: scraper belt type, discharge height approx. 1150 mm • Extraction system: MultiAir exhaust filter, 1200 m³/h • 3D probe: Renishaw RMP 60 • Repeatability: ±2 µm • Probe stylus length: 50 mm • Probe ball diameter: 6 mm • Vises (optional)

Condition: used, Year of construction: 2012, x-travel 2134 mm y-travel 1016 mm z-travel 762 mm CNC-control HAAS CNC Table dimensions 2134 x 914 mm max. table load 1814 kg spindle taper SK 50 spindle turning speed range 7500 U/min spindle motor 22,4 kW feed range 1270 mm/min rapid traverse 15,2 m/min tool change unit 30 Pos. coolant IKZ voltage 400 V Hodpfx Alox E Dn Ne Dofk weight of the machine ca. 13,2 t dimensions of the machine ca. 4,70 x 2,95 x 2,99 m - Serial No.:1099476 - Year of manufacture 11/2012 - Through spindle coolant TSC - 5-Axis pivotable rotary table HAAS TR310 (as new condition) PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EUR

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control SIN 840 D Siemens B - axis +/- 110 x 0,001 ° C-axis 360 x 0,001 ° feed X/Y/Z-axis 1 - 20.000 mm/min rapid traverse X/Y/Z 40,00 m/min spindle turning speed - stepless 20 - 8.000 U/min tool taper SK40 power capacity at 100 % load 13,50 kW power capacity at 25 % load 23,50 kW max. torque at 10% load 85,00 Nm max. torque at 25% load 150,00 Nm table surface area 2.920 x 740 mm number of T-slots 7 T-slot - distance 100 mm T-slots 1x 18H7 / 6x 18H12 integrated rotary-table 750 mm table load of rotary table max. 500 kg tool magazin: 60 tool diameter 80,00 mm wotkpiece diameter with 2 vacant positions 130 mm tool length - max. 300 mm weight of tools max. 6,00 kg total power requirement 57 kW weight of the machine ca. 15,5 t dimensions of the machine ca. 10,50 x 6,60 x H2,70 m Hfjdpfx Aoy Tpk Eel Djk 5-axis simultaneous machining center with SIEMENS SINUMERIK 840D control, ShopMill user interface, chip conveyor, coolant system, exhauster, coolant through the spindle, twin table machining possible – partition wall, electron. handwheel, TS649 measuring probe, Renishaw TRS2 tool breakage detection, swivel milling head B-axis, NC rotary table C-axis. Milling spindle new in 10/2019 Guides and ball screws new in 01/2023

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 480 mm, rotational speed (max.): 6,000 rpm, spindle speed (max.): 3,500 rpm, type of input current: AC, Equipment: rotational speed infinitely variable, AXA VSC 1-1000 M/K – Vertical CNC Machining Center Technical Data Feature | Specification Manufacturer | AXA Entwicklungs- und Maschinenbau GmbH Model | VSC 1-1000 M/K Hsdpfx Aoxp Hmasl Defk Year of Manufacture | 1991 Machine Type | Vertical Traveling Column Machining Center Control | Siemens 810 M/GA3 Axes | 3 axes, prepared for 4th axis Tool Changer | Automatic Tool Interface | SK 40 DIN 69871 A / 69872 A Tool Magazine | 22-position chain magazine Travel X | 1,000 mm Travel Y | 350 mm Travel Z | 480 mm Table Size | 2,350 × 500 mm T-Slots | 3 × 14 H9 Table Load | 500 kg per 1,000 mm Working Area Height | 230 – 710 mm Distance Spindle Center – Column | 425 mm Spindle Speed | 30 – 3,000 min⁻¹ Spindle Power | 11 kW (100% ED) / 14 kW (60% ED) Torque | 150 Nm (100% ED) / 180 Nm (60% ED) Rapid Traverse X/Y | 15 m/min Rapid Traverse Z | 10 m/min Feed Rate Range | 1 – 999 mm/min Repeatability | ± 0.0075 mm Positioning Accuracy | ± 0.015 mm Measuring Systems | Direct linear measuring systems in all axes Axis Drives | Siemens AC servo motors Ball Screws | In all axes Coolant System | 100 l tank, 40 l/min at 2 bar Chip Conveyor | Hinged belt conveyor, discharge height approx. 1,200 mm Central Lubrication | Automatic Optional Axis | NC rotary table RTA 200, Ø 300 mm Equipment Siemens 810 M/GA3 CNC control 9" monitor with softkeys 48 tool offset pairs Drilling and milling cycles Subprogram technique Teach-in and playback function Programming possible during running machining Full enclosure with splash guard Automatic spindle orientation Operating hour counter Complete machine documentation available

Condition: ready for operation (used), Year of construction: 2017, Main Drive Spindle Speed 7500 RPM Spindle motor power 22.4 kW Movement X-Axis Movement 2134 mm Z-Axis Movement 762 mm Hjdpfjx Imrpsx Al Djfk Y-Axis Movement 813 mm This 3-axis HAAS VF 7/50 was manufactured in 2017, featuring extensive axis travels with X-Axis at 2,134 mm, Y-Axis at 813 mm, and Z-Axis at 762 mm. It supports a maximum workpiece weight of 1,814 kg and includes a spindle speed up to 7,500 rpm. Ideal for robust machining tasks, consider the opportunity to buy this HAAS VF 7/50 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 800 kg, controller model: HEIDENHAIN iTNC 530, No reserve price – guaranteed sale to the highest bidder! Hedpfx Aleyvudve Djfk TECHNICAL DETAILS Travel X-axis: 6,000 mm Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle mount: SK 50 Spindle speed: 20 – 9,000 rpm Torque: max. 165 Nm Table load capacity: 3,000 kg Workpiece weight: max. 800 kg MACHINE DETAILS Control: HEIDENHAIN iTNC 530 Main drive: 60 kW Machine weight: approx. 24 t