Condition: used, Year of construction: 2006, Overview This Tetra Pak Tetra Fino Aseptic filling line, manufactured in 2006, is designed for the filling of UHT milk and other liquid food products in pillow-shaped aseptic cartons (Tetra Fino® 1000 ml format). The system enables aseptic filling of ultra-pasteurized products, allowing extended shelf life without refrigeration. With a capacity of approx. 3,600 packs per hour, the line is suitable for small to medium-capacity dairy production. The line consists of a bag forming and filling machine, conveyor systems, and a carton closing module, with manual packing into boxes. The equipment is currently in production and reported to be in good condition. Technical data - Manufacturer: Tetra Pak - Machine type: Aseptic carton filling line (pillow pack) - Format: Tetra Fino Aseptic 1000 ml - Year of manufacture: 2006 - Operating hours: approx. 18,625 h - Capacity: approx. 3,600 packs/h - Filling stations: 1 - Filling system: tbc - Filling type: Aseptic filling - Product: UHT milk (example: 137°C / 4 sec) Suitable for liquid food products Equipment - Aseptic filling machine (bag forming from roll) - Conveyor system for package transport - Conveyor system for carton handling Tedpsy Sh Tvofx Abteb - Manual packing station (bags into cartons) - Automatic carton closing module (SOCO System, year 2014, approx. 740 h) - 1 m mesh conveyor (outfeed for full cartons) - Roll handling trolley (for heavy packaging rolls) - Aseptic filling valves (ABC Valve)

Condition: used, Year of construction: 2015, Overview  This compact brewing, fermentation and packaging setup was manufactured between 2015 and 2022 by various European manufacturers The installation is designed for beer production in bottles and cans and consists of an isobaric filler, can seamer, small brewhouse, fermentation tanks, refrigeration unit, labeller and steel kegs. The equipment is already dismantled and stored und immediiately available. Technical data - Application: Beer (bottles & cans) - Filling type: Isobaric Filling & Seaming - Bottle formats: 33 cl, 50 cl, 75 cl - Bottle output: 350–400 bph (at −1°C to +1°C, 33 cl) - Can formats: 33 cl, 44 cl, 50 cl - Can output: 350–400 cph (at −1°C to +1°C, 33 cl) Tedpfxsy Sccxj Abtob Brewhouse - Capacity: 650 L - Heating: Propane gas - Electrical: Single-phase Fermentation & Cooling - Total fermentation capacity: 9,800 L - Stabilization capacity: 2,940 L - Dimensions (refrigeration unit): approx. 1,100 × 930 × 840 mm Scope of Delivery  - Isobaric Bottle & Can Filler | Inox CG | — | — | 350–400 bph/cph - Can Seamer | — | — | 2022 | Brand new, never used - Brewhouse | — | — | 2015 | 650 L, propane gas, agitator - Refrigeration Unit | W3/4 | — | 2020 | Multi-unit control, 4 zones - Isobaric Fermenter | CEAO Inox | — | 2018 | 650 L, cooling jacket (Unit 1) - Isobaric Fermenter | CEAO Inox | — | 2018 | 650 L, airlock (Unit 2) - Isobaric Fermenter | Construções em Aço Inox | — | 2022 | 650 L, dry-hopping port - Isobaric Fermenter | Construções em Aço Inox | — | 2022 | 320 L, dry-hopping port - Atmospheric Fermenter | — | — | 2015 | 650 L, non-insulated - Semi-Automatic Labeller | — | — | 2015 | Circular reel labels - Stainless Steel Kegs | — | — | — | 50 pcs, 30–50 L

Condition: used, Year of construction: 2011, Overview This shrink-wrapper was manufactured in 2011 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Currently configured for PET bottles (1.5 L) and PET bottles (0,5L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides. Todpey Sccrefx Abteb Technical data  - year of manufacture: 2011 - capacity 60/min  - adjusted formats: 1,5L PET (2x(3x2)) and 0,5L PET  - operation: film only  - application: water, beer, CSD - condition: very good, still connected  Additional information - conveyor for packages available

Condition: used, Year of construction: 2001, Overview Tjdpoy Sccfjfx Abtjb The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  - Total output: 70 cycles/min - electrical connection: 400V/N/PE/50Hz, 3,6kW - Two lanes Additional information - best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) - conveyor for packages available

Condition: used, Year of construction: 2001, Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Todpfoy Scb Uex Abtjb Technical data  - Total output: 70 cycles/min - electrical connection: 400V/N/PE/50Hz, 5,1kW - Two lanes Additional information - conveyor for packages available

Condition: used, Year of construction: 2008, Overview: Tjdpoy Scb Iefx Abtob The ENOS Eticap is a fully automatic labelling machine designed for the application of wet-glue labels on cylindrical bottles. Built by the Italian manufacturer ENOS and delivered in 2008, the system was used in production until 2020 and has since been taken out of service and stored. The machine is equipped with two wet-glue labelling units: one for front and neck labels and one for back labels. The conveyor system supports left-to-right operation. Technical Data:  - manufacturer: ENOS, Italy - model: Eticap - year of manufacture: 2008 - labelling Heads: 2 (wet-glue heads) - Head 1: front and neck labels - Head 2: back labels - operation Direction: Left to right - production Capacity: 4.000/h - adjusted for: cylindrical glass bottles - 0,7 L = Ø75mm - 1,0 L = Ø86mm - condition: Stored off-line since 2020, machine in a good condition - actual label sizes:  - front label: 131mm height, 77mm width - back label: 114mm height, 66mm width

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data - Manufacturer: ATS Wibbing GmbH - Machine Type: Fully automatic KEG cleaning and filling line - Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system - Year of Manufacture: 2025 - Availability: approx. 2-3 months - Capacity: approx. 30 – 35 KEG/h - Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm - Control System: Siemens S7-1500 - HMI: Touchpanel with operator guidance - External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring - Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process Todpfxjy Rk Igj Abteb - Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included - Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet - Expansion vessel 150 l - Pallet handling aid - Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C - Warranty: 2 years manufacturer warranty

Condition: used, Year of construction: 2008, Overview This rotary capping machine (ROPP / roll-on closures) was manufactured in 2008 by AROL Closure Systems. The machine is designed for the application of roll-on closures in beverage and liquid packaging lines, particularly for 28 × 1.5 aluminum closures. It is currently mounted on a pallet and in stored condition. The machine is described as used, with 12 capping heads in very good condition. Visible surface oxidation on the frame is present due to storage but does not affect functionality. The control cabinet is partially open/incomplete with missing HMI.  Technical data - Formats: 28 × 1.5 closures Todpfx Ajy I Nt Nebtob - Application: Capping of bottles (roll-on closures) - Configuration: Rotary turret with 12 capping heads - Neck finish: 28 × 1.5

Condition: used, Year of construction: 1993, Overview  Todpfx Aoy Hmtwsbtob This hotmelt labelling machine for precut paper labels was manufactured in 1993 by Italy PE LABELLERS. The machine is designed for labelling of PET bottles. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data - Capacity: approx. 7,200 bph - Formats: 1.5 L / 2.0 L - Application: PET - Configuration: Hotmelt labelling machine for precut paper labels

Condition: used, Year of construction: 2005, Overview  This shrink hood applicator was manufactured in 2005 by Italy MARFIN. The machine is designed for packaging of PET products on pallets using shrink hood application. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data  - Capacity: up to 50 pallets/hour - Formats: Tedpfey Hmp Ejx Abtob - 1.5 L – 3×2 – 1200 × 800 - 0.5 L – 4×3 – 1200 × 800 - Application: PET - Configuration: Shrink hood applicator

Condition: used, Year of construction: 1994, Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coating is required depending on usage and product conditions. TECHNICAL DATA - Manufacturer: TMCI Padovan - Year of Manufacture: 1994 - Quantity: 2 units - Type: Isobaric pressure tank with full cooling jacket - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 150 hl per tank - Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Tjdpfx Aoy Hknxobtsb - Pressure Rating: 6 bar - Dimensions (per tank): Outer Diameter: approx. 2,400 mm Cylinder Height: approx. 4,000 mm

Condition: used, Year of construction: 1992, Overview Tjdpfjy Hkl Dox Abteb These 4 isobaric pressure tanks (200 hl each) manufactured by TMCI Padovan in 1992 originate from the wine industry and were previously used for sparkling wine production. With their full cooling jacket design and pressure rating of up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and related products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used before stainless steel became the industry standard. They represent a cost-effective alternative to stainless steel tanks, particularly for producers seeking lower capital investment. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. Due to the coating system, regular inspection and renewal of the epoxy lining is required, depending on usage and product type. Technical Data - Manufacturer: TMCI Padovan - Year of Manufacture: 1992 - Quantity: 4 units - Type: Isobaric pressure tank with full cooling jacket - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 200 hl per tank - Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding - Pressure Rating: 6 bar - Dimensions (per tank): Outer Diameter: approx. 2,200 mm Cylinder Height: approx. 7,000 mm Total Height: approx. 9,000 mm

Condition: used, Year of construction: 1985, Overview These 5 insulated pressure tanks (100 hl each) manufactured by TMCI Padovan in 1985 originate from the wine industry and were previously used for sparkling wine production. Due to their pressure rating and full cooling jacket design, they are suitable for fermentation, maturation, and storage of carbonated products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used in the industry before stainless steel became standard. While not as common today as stainless steel vessels, these tanks offer a cost-effective alternative, particularly for producers with lower investment budgets. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. It should be noted that the epoxy coating requires periodic renewal, depending on usage and product type. Technical Data - Manufacturer: TMCI Padovan - Year of Manufacture: 1985 - Quantity: 5 units Tedpfxey Hkkyj Abtob - Type: Pressure tank with full cooling jacket - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 100 hl per tank - Material:Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding - Pressure Rating: 6 bar - Dimensions (per tank):Outer Diameter: approx. 2,200 mm Cylinder Height: approx. 4,000 mm

Condition: used, Year of construction: 2005, Overview These 8 isobaric pressure tanks (500 hl each) manufactured by Sirio Aliberti in 2005 originate from the wine industry and were previously used for sparkling wine production. With a working pressure of up to 6 bar and full insulation, the tanks are well suited for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, combined with polyurethane insulation and stainless steel external cladding. This design represents a traditional and cost-efficient alternative to stainless steel tanks, which became standard in later years. Thanks to their large volume and isobaric capability, these tanks are particularly suitable for high-capacity production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required, depending on operating conditions. TECHNICAL DATA - Manufacturer: Sirio Aliberti - Year of Manufacture: 2005 - Quantity: 8 units - Type: Isobaric pressure tank - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 500 hl per tank - Material: Base: Carbon steel Internal coating: Food-grade epoxy Insulation: Polyurethane External cladding: Stainless steel sheet - Working Pressure: 6 bar - Dimensions (per tank): Internal Diameter: approx. 3,200 mm External Diameter: approx. 3,450 mm Cylinder Height: approx. 5,250 mm Leg Height: approx. 1,200 mm Total Height: approx. 7,800 mm Tedpfxey Hkkas Abteb

Condition: used, Year of construction: 2002, Overview This Twin Pack MDEL handle applicator, manufactured in 2002, is designed for the application of carry handles on beverage multipacks. The machine was primarily used for producing various multipack configurations, including 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, and 2x3x1.5L, offering flexibility across different bottle sizes and packaging formats. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data - Manufacturer: Twin Pack - Model: MDEL - Machine type: Handle applicator (carry handle machine) - Year of manufacture: 2002 - Application: Application of carry handles for beverage multipacks - Formats: 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, 2x3x1.5L Equipment Tsdpfoy Hkhfox Abtob - Automatic carry handle application system - Suitable for various multipack configurations - Integration capability into existing bottling and packaging lines

Condition: used, Year of construction: 2015, Overview Tjdpfxsy Hkghj Abtjb This automatic self-adhesive labelling machine was manufactured in 2015 by Not provided ENOS. The machine is designed for flexible labelling of bottles in beverage, wine, and spirits production. It is described in good condition. Maintenance work was carried out in summer 2025, including replacement of the pressure block and bottle contact rollers. Availability is on request. Information regarding installation status, visit possibility and reason for sale is not provided. Technical data - Capacity: - approx. 1,200 bottles/hour (standard labels) - up to approx. 1,500 – 1,800 bottles/hour (small labels) - approx. 1,100 bottles/hour (front and back from one roll) - Formats: Diameter 50 – 100 mm, conical bottle shapes - Application: Bottle labelling (beverage, wine, spirits) - Configuration: 1 labelling station with 3-roll system for front and back labelling from one roll - Label positions: Front, back - Incl. Capsule applicator, Capsule shrink unit, Conveyor system and Accumulation table

Condition: used, Year of construction: 2002, Overview This SMI LSK 45 T shrink wrapping machine, manufactured in 2002, is designed for the packaging of beverage multipacks using shrink film. The machine was previously used for producing various sixpack configurations and is suitable for different bottle sizes, offering flexibility in multipack formats. With a capacity of up to 45 packs per minute, the machine is well suited for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical Data - Manufacturer: SMI - Model: LSK 45 T - Machine type: Shrink wrapping machine (film packer) - Year of manufacture: 2002 - Capacity: approx. 45 packs per minute - Packaging type: Shrink film (with film discharge) - Application: Packaging of beverage multipacks - Formats: 2x3 x 0.5 L 2x3 x 1.0 L 2x2 x 1.0 L 2x3 x 1.5 L Additional Information - Machine was used in beverage production for disposable bottle packaging - Designed for flexible multipack configurations Todpfx Absy Hkauotob - Currently stored and available for shipment

Condition: used, Year of construction: 2002, Overview This SMI TF 300 tray forming machine, manufactured in 2002, is designed for the automatic forming of trays in beverage packaging lines. The machine was previously used for packing 4x6x0.5L sixpacks into trays and achieves a capacity of up to 23 packs per minute, making it suitable for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data - Manufacturer: SMI - Model: TF 300 - Machine type: Tray forming machine (tray erector / tray packer) - Year of manufacture: 2002 - Capacity: approx. 23 packs per minute Tsdpoy Hi U Dofx Abtob - Application: Tray packing of multipacks (e.g. 4x6x0.5L sixpacks) Equipment - Automatic tray forming system - Suitable for beverage multipack tray applications - Integration capability into existing packaging lines

Condition: used, Year of construction: 1993, Overview  This shrink packer was manufactured in 1993 by France POLYPACK INDUSTRIES. The machine is designed for shrink wrapping of PET bottles using neutral film with sealing bar. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data  - Capacity: approx. 20 ppm - Formats: - 1.5 L – 3×2 - 2.0 L – 3×2 Tedpfx Asy Etqmebtjb - Application: Shrink packaging of PET bottles - Configuration: Shrink packer with sealing bar (film only)

Condition: used, Year of construction: 1993, Overview  This filling monobloc was manufactured in 1993 by the companies PERRIER / GANGLOFF / ZALKIN / CTA. The machine is designed for filling still water and was originally configured for glass bottles and later retrofitted for PET bottles. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. In 2006, an air filtration system (CTA DA001) was added. The CIP system is integrated. Tsdpfx Asy Etd Tebtjb Technical data  - Capacity: approx. 6,000 bph (1.5 L) - Formats: 0.5 L / 1.5 L - Application: Filling of still water (PET bottles) - Configuration: 16 rinsing heads / 20 filling valves (atmospheric) / 6 capping heads - Neck finish: 30/25 - Incl. Cap feeder, Air filtration system, CIP system

Condition: used, Year of construction: 2009, Overview  This handle applicator was manufactured in 2009 by Italy TWIN PACK. The machine is designed for handle application on PET bottle packs. Production was stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It has less than 500 operating hours and is available immediately. The reason for sale is a new project with installation of a complete new line. Technical data  Tedpfx Ajy Etdgsbtsb - Capacity: 35 ppm - Formats: 1.5 L – 3×2 - Application: Handle application for PET bottle packs - Configuration: Not provided - Operating hours: Less than 500 hours

Condition: used, Year of construction: 2003, Overview This PALL Microflow filtration system is designed for the crossflow filtration of beer, enabling continuous and fully automated clarification processes. The system is configured as a tandem installation with a capacity of up to 50 hl/h, suitable for medium to high-capacity brewery operations. It operates with membrane filtration modules, allowing gentle product handling and stable filtration performance. The unit includes pumps, integrated CIP system, and Siemens-based automation, ensuring a high degree of process control and hygiene. Technical Specs  - Capacity: approx. 50 hl/h (tandem system, 24h operation) - Filtration type: Crossflow (microfiltration) - Number of modules: 48 - Operating temperature range: 0°C to 70°C - Equipment: Pumps, integrated CIP system, complete piping, control system - Control system: Siemens S7 with Siemens OP07 HMI - Automation level: Fully automatic Equipment  - Filtration modules (48 units) - Product pumps Tjdoy Etcpjpfx Abteb - Integrated CIP system - Complete piping system

Condition: used, Year of construction: 2019, Overview This keg handling package consists of a M+F Keg Technik Monomat + RMT keg washing system, a keg filling unit, and a large quantity of stainless steel kegs in various sizes, complemented by beer taps. The system is suitable for small to medium-scale brewery operations, enabling cleaning and filling of kegs for beer distribution. The washer was manufactured in 2019 and offers a compact and efficient solution for keg processing. Technical data - Keg washer manufacturer: M+F Keg Technik - Keg washer model: Monomat + RMT - Year of manufacture: 2019 - Capacity: approx. 12 kegs/hour - Keg filler: Included (manufacturer unknown) - System type: Semi-automatic keg washing and filling setup Equipment - Keg Technik Monomat + RMT keg washer Tsdpfx Aboy D Ertotjb - Keg filling system (standalone unit) - 195 x 30 L stainless steel kegs (Type S/A) - 39 x 50 L stainless steel kegs (Type S) - 22 x 20 L stainless steel kegs (Type A) - 22 x 10 L stainless steel kegs (Type S) - 10 x beer taps (various manufacturers)

Condition: used, Year of construction: 2018, Overview  This wrap-around case packer (cardboard packaging machine) was manufactured in 2018 by Germany KRONES. Tjdpfxsy A Nd Dj Abteb The VARIOPAC PRO W-7 is designed for cardboard packaging of PET bottles. The machine is still installed, connected to energy, and currently in production. It will be available from mid of May 2026 and can be visited in production on request. Technical data  - Capacity: 67 cartons/min (x6) - Formats: - 1000 ml – 3×2 – single lane - 500 ml – 6×4 – single lane - Application: Cardboard packaging (wrap-around) for PET bottles - Configuration: Wrap-around case packer

Condition: used, Year of construction: 2000, Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data Tedpfx Abey Azv Sjtsb - Capacity: up to approx. 15,000 bph - Formats: 0.5 L – 1.0 L, 11 formats - Application: Cold glue labeling of bottles - Configuration: 20-head rotary table, 3 labeling aggregates - Label positions: Front, back, neck/seal label - Utilities: Standard Krones control system - Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation