Condition: excellent (used), Year of construction: 2005, operating hours: 23,500 h, chuck outer diameter: 250 mm, turning diameter: 320 mm, rotational speed (max.): 4,000 rpm, swing diameter 320 mm control 840 D SIEMENS turning speeds 5000 1/min spindle drive 20 / 27 kW chucking diameter 250 mm travel -x axis 650 mm travel -z axis 300 mm turret head 12 Pos. tool holder VDI 40 toolpiece turning speed range 4000 1/min Cgjb Hdfowhd Sgjutst work piece power max. 11,7 kW CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on"

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, Technical Description – SERTOM EMO 15-60 (Year of Manufacture: 2007) 3-Roll Plate Bending Machine / Round Bending Machine Manufacturer: SERTOM (Italy) Model: EMO 15-60 Year of manufacture: 2007 Condition: Excellent Cgjb Hdfewg Sdzjutot SIEMENS SIMATIC control panel Main Technical Data: Plate length – upper roll: 1550 mm Plate length – side rolls: 1550 mm Diameter of upper roll: 590 mm Diameter of side rolls: 480 mm Maximum opening between rolls: 285 mm Working height of side rolls from floor: 1620 mm Maximum load on upper roll: 6900 kN Geometric Features: Roll rotation speed: 2.5 – 5 m/min Transmission speed of upper roll: 200 – 430 mm/min Total installed power: 75.2 kW Voltage / Frequency / Phases: 380 V ±10 %, 50 Hz, 3~ Machine weight: 52,000 kg Machine dimensions (L x W x H): 600 x 360 x 320 cm Additional Functional Data: Usable length of upper roll: 2100 mm Usable length of side rolls: 2100 mm Bendable sheet thickness: not specified Roll rotation speed: 2.5 – 5 m/min Functional diameter of upper roll: 320 – 280 mm Diameter of side rolls: 370 mm Working height of lower rolls from floor: 1138 mm Hydraulics & Lubrication: Pump motor power: 37 + 7.5 kW Max. operating pressure (high): 215 bar Max. operating pressure (low): 150 bar Hydraulic oil type: Mineral oil Hydraulic tank capacity: 700 l Lubricant type: Grease Lubricant tank capacity: 1.5 l Support Devices: Side support – max. load: 2 x 25,000 kg Upper support – max. load: 44,000 kg You want to see video of machine running under power? Contact us in WhatsApp.

Condition: new, Year of construction: 2025, We replace broken fiber cable of your IPG, Max, Raycus or any brand of fiber lasers. We're providing QBH,QD,Q+ fiber laser cables and give you professional service by replacing your cable with our cables which of the quality has been proven in the field for many years! We support our customers with our expertise on fiber lasers of any kind. Ceb Hdfuewf Nunjtegt

Year of construction: 2021, Condition: ready for operation (used), General Data Measurements width 2050 Measurements depth 2150 Measurements height 2400 Additional Equipment Vacuum table Abrasive belt Touch operator panel Cgeb Hdfjwgf E Sjutjt This ADV 508-RW-1100 grinding machine was manufactured in 2021. It features a working width of 1100mm and can handle material thickness from 0.5 to 100mm. Equipped with a vacuum table and an abrasive belt for efficient surface grinding and burr removal. Ideal for a range of applications, the machine we have for sale offers a working speed of 0.5-5m/min. For more information about this grinding machine, please reach out to us. Application Types Grinding

Condition: ready for operation (used), Functionality: fully functional, HEAT TREATMENT FACILITY WITH SCADA CONTROL SYSTEM Ceb Hdfewgmp Soutogt AKF1 İPSEN TQF 4 EM 1977 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF2 İPSEN TQFRA 5 EM 1991 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF3 İPSEN T4 EM 1972 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF4 İPSEN TU-5 EM 1970 model Atmosphere controlled Chamber type furnace (1 Piece) • HSH 2011 model high temperature stress relief, bright annealing (1 Piece) • İpsen Dac 5 ER 2011 model nitriding, high temperature stress relief (1 Piece) • İpsen DAC 4 1980 model high temperature stress relief, bright annealing (1 Piece) • HSH 2007 model high temperature stress relief, bright annealing (1 Piece) • BOREL 1987 model well stress relieving furnace (1 Piece) • 1972 model Ipsen stress relieving furnace (2 Pieces) • Loading car (1 Piece) • Unloading car (1 Piece)

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Csb Hdel Dw U Djfutjgt Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Mazatrol Matrix, total length: 500 mm, table width: 500 mm, table height: 500 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 10,000 rpm, We have two similar machines in stock, one is a 2008 model and the other is a 2005 model. Csbewhd Iue Hdfutogt

Condition: good (used), Year of construction: 1999, operating hours: 10,500 h, Functionality: fully functional, machine/vehicle number: HFBO1033R990221, Approx. 10,450 operating hours year of manufacture 1999 S/N HFBO 10 33 R990221 400 V // 50 Hz // 9 kW max. pressing force: 1,000 kN max. stroke: 200 mm stopping time: 60 ms stopping distance: 6 mm Machine comes with accessories. Condition: Good and ready for re installation. Csbswg Sa Ao Hdfutegt

Condition: used, Year of construction: 2020, Functionality: fully functional, We provide laser REPAIR services for all kind of IPG lasers. We replace broken laser modules with referbished fully functional ones, do all adjustments and make your fiber laser up and running! No matter what the problem is with your IPG Laser Source, we bring it back to life. Not only IPG sources, we repair Max Photonics, Raycus and other laser sources with our more than 10 years of experience in fiber laser industry. Cgob Hswf Hxqedfutet

Condition: new, Year of construction: 2025, For customers from: Lithuania, Latvia, Estonia. Equipment for straightening, longitudinal cutting, and shearing rolled metal is an integral attribute of companies working with sheet metal. The FORSTNER company, which has long-term experience in the production of rolled metal processing machines, currently offers the market not only conventional metal shearing machines, but also equipment that performs straightening, longitudinal cutting, and shearing functions. The shearing function is performed using disk or guillotine shears. Depending on your production goals and the tasks the equipment must perform, they can be divided into four groups: 1. shearing machines; 2. longitudinal cutting and shearing machines; 3. straightening and shearing machines; 4. straightening, longitudinal cutting, and shearing machines. The straightening and longitudinal cutting functions of certain models of longitudinal cutting machines can be automated, which allows you to quickly and conveniently change the parameters when starting to work with another material. Forstner EASY series equipment is a machine that cuts a sheet of metal of a set length with the help of a guillotine or circular shears. EASY CUT machines are equipped with circular shears that can cut steel up to 1.0 mm thick. If you need a machine that can cut thicker metal, then it is recommended to choose the EASY PRO model with a guillotine. The working width of the machines can be 1250 mm or 1500 mm. Forstner STRAIGHT. These machines, by pulling a set length of a sheet of metal, straighten it and cut it. Depending on the type of cross-cutting knife and the diameter of the straightening rollers, the thickness of the processed metal varies from 1 mm to 2 mm. STRAIGHT and POWERSTRAIGHT also differ in the adjustment of the straightening rollers: mechanical or automatic. Integrated automatic control saves time in the long term, because changing the operating parameters of the machine is enough to press one button. Automatic control is a great choice when working with many different materials. The Forstner SLIT series is a reliable assistant when cutting rolled metal. The SLIT CUT and SLIT PRO models not only cut the metal, but also cut it lengthwise into strips of the selected width. As standard, these models are equipped with 5 longitudinal cutting knives (the maximum number of knives is 7). The main difference between the SLIT CUT and SLIT PRO models is the type of cutting knife - a circular shear or a guillotine. The Forstner COMPACT series is a device that pulls the required length of material, flattens it, cuts it into strips of the desired width and cuts sheets of a set length. The main difference between the models is the type of knife used for cutting: a circular shear or a guillotine. The flattening rollers and longitudinal cutting knives are mechanically adjusted. Cgeb Hdewd E N Eefutot POWER COMPACT is a powerful equipment for flattening, longitudinal cutting and shearing rolled metal. These two models differ in working width and cross-cutting metal thickness. NuSLIT machine models are fully automated equipment. If you are looking for an automatically controlled machine that performs longitudinal cutting and cutting functions, you should choose the nuSLIT PRO or nuSLIT PROCUT models. The difference between these two models is the type of cutting knife: guillotine or segmented disc shears. NuSLIT STRAIGHT PRO and nuSLIT STRAIGHT PROCUT, in addition to the above functions, also smooth the metal sheet.

Condition: new, Solberga SE2035 - Geared drilling machine - Drill head can be swiveled 360° around the column and is height-adjustable - Gearbox built with traditional and tested technology for the highest possible torque - helical gears made of steel reinforced with fiber material offer high efficiency, a low noise level, long service life and a virtually maintenance-free gearbox - Spindle made of steel - ensures optimum concentricity of the tool thanks to its adjustable tapered rollers (ball bearings) - Adjustable spindle return spring - the return force can be adapted to the weight of the tool - automatic feed (model M) - when the preset drilling depth is reached, the spindle returns to its starting position (the feed gear is equipped with automatic overload protection and can also be interrupted manually) - Electromagnetic feed and automatic tapping device (ME model) - high-quality cast-iron rectangular table (500 x 400 mm) with T-slots and oil channel - height-adjustable and can be swiveled 360° around the column - Steel drilling column - guarantees lasting stability of the machine and high precision and angular accuracy between drill and table - Base plate with T-slots and oil channel - Equipped with thermal overload protection, power failure protection and emergency switch Optional equipment - LED work lighting - Tool set for MK4 - Machine vice 150 mm jaws - 2 x T-slot stones - Drill chuck 1 - 13 mm B16 Metabo, arbor MK4 - Reducing sleeve MK4 / MK3 - Reducing sleeve MK4 / MK2 - Reducing sleeve MK4 / MK1 - Automatic tapping device - Complete coolant unit - Foot-operated tapping device - Foot-operated on/off switch for spindle motor - Spindle nose with thread for tool holder Cgsbsuzhx Aj Hdfutjt - Cross table FB102 584x242 mm, longitudinal movement 415 mm, transverse movement 155 mm - Drill chuck 0 - 13 mm with arbor MK4 - Drill chuck 3 - 16 mm with mandrel MK4 - Special finish Technical specifications - Drilling capacity: 35 mm - Quill stroke: 150 mm - Tapping capacity (steel / cast iron): M 18 / M 22 - Spindle holder: MK4 - Spindle speed: 85 - 3160 rpm - Gear stages: 8 - max. distance spindle/table: 820 mm - max. distance spindle/base plate: 1150 mm - throat depth: 320 mm - Drill table size: 500 x 400 mm - Column diameter: 127 mm - Motor power: 1.6 kW - Voltage: 400 V - Dimensions WxHxD: 500 x 1785 x 700 mm - Weight: 290 kg

Condition: used, Year of construction: 1994, filter area: 250 m², suction capacity: 7,500 m³/h, Dust extraction, welding fume extraction, filter ventilation, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust absorber. Donaldson Torit model: 3DF12 cyclopeel - with pre-separator Cartridge filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter inserts. Fan with a power of 5.5 Kw Max efficiency 7500 m3/h Filtration surface 250 m2 12 filter inserts inlet diameter - 315 mm Dimensions: filter unit: width - 2.15 m x 2.25 m height - 3.15 m control cabinet: length - 1.20m width - 0.80m height - 0.40m fan: length - 1.20m width - 0.80 m height - 1.20m Cgjb Hdswgknxefutjt stock no.: 0988

Condition: ready for operation (used), Year of construction: 2016, operating hours: 27,000 h, General Data Measurements width 6360 Measurements depth 9960 Measurements height 4724 Machine weight 35000 Control Unit Brand HURCO Model WinMax 5 Main Drive Spindle speed range 18000 Spindle motor power 35 kW Main motor power 187 KVA Movement X-Axis Movement 3200 mm X-Axis Rapid Traverse 15 m/min Y-Axis Movement 2100 mm Y-Axis Rapid Traverse 15 m/min Z-Axis Movement 920 mm Z-Axis Rapid Traverse 10 m/min Table Cgeb Hdfowdbcneutjt Outer length 3000 mm Outer width 1700 mm Min distance between vertical spindle and table 164 mm Max distance between vertical spindle and table 1084 mm Table load 11000 Tools Slots in storage 40 Max weight 15 kg Max tool diameter 125 mm Max tool length 300 mm Additional Equipment Oversized linear guides and ultra-rigid roller linear guides Ball screws with double nut and automatic centralized lubrication system Screw chip conveyor and chip conveyor with scrapers Machine interior washing system with emulsion gun/compressed air Ring with emulsion nozzles in the shaft head Large side doors for access LED-illuminated workspace Heat exchanger in the electrical cabinet Premium remote control equipped with LCD display IKZ-20 Spindle cooling CTS20 (20 bar) This 3-axis Hurco DCX32-5Si vertical machining centre was manufactured in 2016. It features a large work surface of 3,000x1,700 mm, supports a maximum table load of 11,000 kg, and offers extensive travel distances with X at 3,200 mm, Y at 2,100 mm, and Z at 920 mm. Equipped with a high-speed main spindle capable of 18,000 rpm and a robust 40-position tool magazine, this machine is ideal for complex, large-scale machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: like new (used), Power: 7.5 kW Voltage: 280 V / 50 Hz Ceb Hdfewhdvfoutsgt

Condition: new, Year of construction: 2025, For customers from the Baltic States only: Lithuania, Latvia, Estonia. Available models: Cidan F26 (2600 mm x 1.75 mm) F32 (3200 x 1.5 mm ) F41 (4100 x 1.2 mm) The CIDAN F metal bending machine is characterized by a strong stable frame, is fast and convenient to perform operations. Reinforced side frames ensure stable movement of the clamping and bending beams. The clamping beam operates with the help of an eccentric, which reduces wear of parts during movement to a minimum. This also ensures the best possible opening and closing speed. The eccentric drive eliminates the need for adjustment and parameter adjustment over a long period of time, which ensures a long service life of the clamping motor. During clamping, the eccentrics create a very high clamping force, which is a great advantage when performing double bending (stiffening edges). Software NULINK The control program is designed specifically for CIDAN bending machines, it is user-friendly, so even an inexperienced operator will find it convenient to navigate, program, check and easily design parts. Instructions, notes and tips for the user are presented with the help of interactive graphics. A large number of programs can be stored in the control memory. NULINK calculates the product layout and automatically creates the program. The prepared part is displayed with the actual folding sequence. As an option, you can also choose the OFFLINE add-on, thanks to which you can prepare drawings from a computer in the office. Backrest EGS EGS is a 1020 mm long automatically adjustable backrest for bending machines. It is equipped with one servo motor and belt drives on both sides. It takes less than 2 seconds to obtain an exact position between 2 and 1020 mm. The support plates in the first row are made of spring steel as standard. With one press of the pedal, all supports can be lowered automatically, thus avoiding possible impact of the material when turning it on the worktable. As an option, you can choose another end support FLEXIBLE with a depth of 1550 mm - 4200 mm (more in the options section). Cgsb Hewd Emkedfutet Tools: upper clamping, lower and bending beams The bending machine has 3 types of beams: upper clamping, lower and bending. Each of them is equipped with a different type of tools. The upper beam tool consists of 3-4 segments, so only specific damaged segments can be replaced, avoiding greater time and financial costs. Upper beam tool parameters: 30° R1. The bending beam tools are available in three sizes: 7mm, 10mm and 15mm wide. The lower beam tools are sturdy and prevent any sensitive material from being scratched or deformed during clamping. Other tool sizes and types are also available (more in the options section). If you have any further questions, we are always happy to advise you by phone or invite you to see the machine in person.

Condition: new, - Drill head can be swiveled 360° around the column and is height-adjustable - Gearbox built with traditional and tested technology for the highest possible torque - helical gears made of steel reinforced with fiber material offer high efficiency, a low noise level, long service life and a virtually maintenance-free gearbox - Spindle made of steel - ensures optimum concentricity of the tool thanks to its adjustable tapered rollers (ball bearings) - Adjustable spindle return spring - the return force can be adapted to the weight of the tool - automatic feed (model M) - when the preset drilling depth is reached, the spindle returns to its starting position (the feed gear is equipped with automatic overload protection and can also be interrupted manually) - Electromagnetic feed and automatic tapping device (ME model) - high-quality cast-iron rectangular table (500 x 400 mm) with T-slots and oil channel - height-adjustable and can be swiveled 360° around the column - Steel drilling column - guarantees lasting stability of the machine and high precision and angular accuracy between drill and table - Base plate with T-slots and oil channel - Equipped with thermal overload protection, power failure protection and emergency switch Optional equipment - LED work lighting - Tool set for MK4 - Machine vice 150 mm jaws - 2 x T-slot stones - Drill chuck 1 - 13 mm B16 Metabo, arbor MK4 Cgobovb Hdgs Hdfutot - Reducing sleeve MK4 / MK3 - Reducing sleeve MK4 / MK2 - Reducing sleeve MK4 / MK1 - Automatic threading device - Complete coolant unit - Turning device for table 400 x 500 mm - Foot-operated on/off switch for spindle motor - Spindle nose with thread for tool holder - Lower spindle speeds 60 - 980 rpm - Higher spindle speeds 180 - 3000 rpm - Cross handle with 3 levers - Cross table FB102 584x242 mm, longitudinal movement 415 mm, transverse movement 155 mm - Milling cutter chuck ER, MK4, 5, collets 6, 8, 10, 12 and 20 mm - Drill chuck 0 - 13 mm with arbor MK4 - Drill chuck 3 - 16 mm with mandrel MK4 - Special finish Technical data: - Drilling capacity: 40 mm - Quill stroke: 190 mm - Tapping capacity (steel / cast iron): M 24 / M 28 - Spindle holder: MK4 - Spindle speed: 90 - 1500 rpm - Gear stages: 8 - max. distance spindle/table: 830 mm - max. distance spindle/base plate: 1210 mm - throat depth: 330 mm - Drill table size: 500 x 400 mm - Column diameter: 140 mm - Motor power: 2.6 kW - Voltage: 400 V - Dimensions WxHxD: 500 x 2120 x 750 mm - Weight: 310 kg

Condition: used, Year of construction: 2006, filter area: 84 m², suction capacity: 4,000 m³/h, Dust extraction, welding fume extraction, self-cleaning filter, cartridge for plasma, laser, sandblasting, shot blasting. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Cjb Hdfowgircjutegt Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: SULT Model: FLC 2-4 HP Year of production 2006 Engine power 4 Kw Efficiency: 2000 - 4000 m3/h Cartridge filter inserts - 4 pcs. Filtration surface 84 m2 total height - 2.95m width - 1.20m depth - 1.15m stock no.: 0987

Year of construction: 2011, operating hours: 30,000 h, Condition: ready for operation (used), General Data Measurements width 2800 mm Measurements depth 7800 mm Measurements height 2900 mm Machine weight 10400 kg Cjbswfiixj Hdfutjgt Control Unit Brand SIEMENS Model SINUMERIK 840D Main Drive Number of axis 2 Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Workpiece Z 75 mm Workpiece weight 720 kg Max Material Thickness Aluminium 6.0 mm This TRUMPF TruLaser 1030 was manufactured in 2011. A reliable CO2 laser cutting machine, it offers precision in cutting a variety of materials. Ideal for those looking to enhance their cutting capabilities. Contact us for more information. Application Types Cutting

Condition: new, Year of construction: 2025, For customers only from the Baltic countries: Lithuania, Latvia, Estonia. The CIDAN RAPIDO guillotine is a fast and reliable metal cutting machine. Depending on the length of the processed metal, guillotines of different working lengths are offered: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Cutting thickness: 3.5 - 1.5 mm. The guillotine can perform up to 35 cuts per minute. The drive system with eccentrics, the lowering bars for holding the cut sheet and the system that presses the material during cutting are installed only 2.5 cm from the knives, which allows you to easily, quickly and conveniently cut narrow strips. RAPIDO guillotine shears have corner supports on both sides of the table, ensuring that the material is fed into the machine at a right angle, and LED cutting zone lighting, thanks to which you will clearly see the cutting line. Backrest and control system CUTLINK CUTLINK is a fast, reliable and easy-to-use program that allows you to simultaneously enter up to 10 different operations. The backrest automatically adjusts itself according to the entered parameters. As standard, the guillotine is equipped with a 750 mm deep backrest, but if necessary, a 1000 mm backrest can be selected as an option. Sheet support and return To achieve maximum control, the back sheet support is pneumatically controlled. This allows you to adjust the sheet feed speed depending on the type of material being processed. After cutting, the sheet support lowers the material into the return carriage (forward return). If necessary, the sheet return function can also be selected as an option. Ceb Hjwd Ebzodfutsgt If you have any further questions, we will always be happy to consult you by phone or invite you to inspect the machine live.

Condition: new, Special price €2,800 instead of €3,340 excl. VAT - Precise drilling depth adjustment - Suitable for drilling and tapping (optional) Cjb Hdfeu Tq Stjutsgt - The drilling table is height-adjustable and can be rotated around the column - Made in Sweden Specifications - Drilling capacity: 25 / 28 mm - Spindle stroke: 130 mm - Tapping capacity (steel / cast iron): M 16 / M 20 - Spindle mount: MT3 - Spindle speed: 129 - 1498 rpm - Gear ratios: 4 - Max. spindle/table distance: 730 mm - Throat depth: 255 mm - Drilling table size: 500 x 400 mm - Column diameter: 100 mm - Motor power: 0.65 kW - Voltage: 400 V - Dimensions W x H x D: 500 x 1720 x 500 mm - Weight: 185 kg

Condition: good (used), Year of construction: 1993, filter area: 212 m², suction capacity: 8,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. Donaldson Torit model: 3DF12cyclopeel - with pre-separator. Cartridge filter cartridges cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. The fan is located behind the filter on the clean side which reduces the risk of explosion to a minimum. Cartridge filter cartridges. Fan of 11 Kw Efficiency 8000 m3/h Filtration surface 212 m2 Filter cartridges 12 pcs. Inlet diameter - 400 mm Control cabinet Dimensions: width - 2.20m x 2.10m height - 4.10m Cgob Hdjtrxzrsfutot

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 1200 mm Measurements depth 2250 mm Measurements height 1700 mm Machine weight 2200 kg Main Drive Number of spindles 2 Spindle speed range 7000 rpm Cgob Hdfuewhgvuotjt Spindle motor power 7.5 kW / 3.7 kW Number of axis 7 Workpiece Workpiece drm Ø32mm Additional Equipment High Pressure Coolant System: Hydrajet BF20-2000 Mist Extraction Unit: Absolent A.Mist 10S Fire Suppressor: Stat X Signal Production Tower: Werna This 7-axis Star SR-20J type C Swiss Type Turning was manufactured in 2015. It features a maximum machining diameter of 32mm, headstock stroke of 310mm, and spindle speeds up to 7,000rpm. Equipped with a Hydrajet BF20-2000 high-pressure coolant system and an Absolent A.Mist 10S mist extraction unit, the Star SR-20J type C represents a robust addition to any machining setup. Contact us for further details regarding this Swiss Type Turning. Application Types Turning

Condition: used, Year of construction: 2004, AMADA laser cutting machine is in good condition, one owner, always serviced on time by AMADA service representatives. The complete set is being sold. All documentation and service reports are included. The laser cutting machine is connected, it can be inspected and tested. Specification: Model: AMADA LASMAC LC2415 A3 NT Year of manufacture: 2004 Made in: Japan Power: 2kW Working area (X x Y): 1500 x 3000 Weight: 6.3 T Cgeb Hdfujwdwapetjt Working hours: 61,983 If you have any more questions, we will be happy to answer them.

Year of construction: 2014, Condition: ready for operation (used), Control Unit Brand SIEMENS Model 840 D Main Drive Spindle speed range 8000 Ceb Hdfuswhgwfstsgt Spindle motor power 11 Kw Movement X-Axis Movement 140 mm This Hanwha STL 38 H Lathe was manufactured in the year 2014. It is equipped with a SIEMENS 840 D control unit. The machine has a spindle speed of 8000 rpm. Application Types Turning

Year of construction: 2013, operating hours: 23,101 h, Condition: ready for operation (used), Control Unit Brand Fanuc Model 0i-TD Main Drive Cgeb Hjwhgvnodfutot Spindle speed range 3500 Spindle motor power 22 / 18.5 Kw Movement X-Axis Movement 280 mm Y-Axis Movement ± 60 mm Z-Axis Movement 790 mm This Hwacheon HI-ECO 450A YMC lathe was manufactured in 2013. It features a Fanuc 0i-TD control, a spindle speed of 3,500 rpm, and a spindle power of 22/18.5 Kw. The machine offers a maximum rotating diameter of Ø 700 mm and a workable length of 637 mm. It includes a tool turret with 12 live tool positions and a chip evacuator. For more information about this lathe, please reach out to us. Application Types Turning