Condition: good (used), Manufacturer: MÜLLER Gsdpfon D Eiaox Ah Deuk Tip: SDZ 63t Table surface: 620x500mm Pressure: 63 t

Condition: new, Year of construction: 2025, table width: 1,100 mm, table length: 2,200 mm, pressing force: 250 t, stroke adjustment: 120 mm, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, STANDARD FEATURES: • Steel Construction Body • Pneumatic Clutch Brake • T-Slot Additional Plate • 8-Guided Slide Ram • Adjustable Stroke on Single Connecting Rod • Balance Piston on Slide Ram • Fully Automatic Fine Lubrication System • PLC Control System • Piano-Type Control Panel • Touch LCD Screen • Motor Reverse Operation • Overload Hydraulic Safety Device • Motorized Ram Adjustment Mechanism • Light Curtain Safety Barrier • Gear Group in Sealed Oil Reservoir • Double-Coil Safety Valve • CE Compliance OPTIONAL FEATURES: • Press Feeding Systems • Scrap Ejection Systems • Sliding Cover for Table Front • 1 Set of Die TECHNICAL SPECIFICATIONS: Guedpfxsvtw Ade Ah Djk CAPACITY: 250 TON USABLE AREA OF LOWER TABLE: 1100x2200 mm USABLE AREA OF UPPER TABLE: 1100x2200 mm FIXED STROKE LENGTH: 200 mm RATED TONNAGE: 7 mm STROKES PER MINUTE (SPM): 25 – 45 MAXIMUM CLOSED DIE HEIGHT: 600 mm MINIMUM CLOSED DIE HEIGHT: 480 mm SIDE WINDOW DIMENSIONS: 700x700 mm SLIDE ADJUSTMENT (RAM ADJUSTMENT): 120 mm NUMBER OF CONNECTING RODS: 2 units NUMBER OF CRANKSHAFTS (ECCENTRIC SHAFTS): 2 units SAFETY DEVICE: Hydraulic ELECTRICAL PANEL EQUIPMENT: Siemens - Schneider LUBRICATION SYSTEM: Automatic SCREEN – PLC – INVERTER: Siemens - Pilz SAFETY BARRIER: Leuze OPERATION SYSTEM: 4-Position DIE MEMORY: 99 sets INSTALLATION TYPE: Floor Mounted BODY TYPE: Monoblock MOTOR POWER: 30 kW – IE3 MOTOR SPEED (RPM): 1450 APPROXIMATE MACHINE DIMENSIONS (L x W x H): 4750x3200x2200 mm APPROXIMATE WEIGHT: 32,000 kg

Condition: new, Year of construction: 2025, neu 2025 070126 Jänner 2026, Zwischenverk Türkei 48500 € 926.35 € 60 to 3.5 mm 500 mm 700 mm 190 mm 1 - 100 mm 65 1/min 4 70 mm 45 mm 260 mm 365 mm 5,5 kW 1250 mm 1350 mm 2400 mm 3500 kg welded steel construction body frame 4-fold ram guide pneumatic clutch-brake combination fully closed gearbox working in oil bath photocell light barriers Gsdpswwwtisfx Ah Deuk mechanical overload protection two hand and foot pedal control manual adjustable stroke automatic central lubrication according to CE rules OPTIONS: vibrations pads bolster plate picture incl. optional available bolster plate

Condition: used, Year of construction: 1970, pressure 1 t Stroke 315 mm Godpfsv Td Ersx Ah Deuk

Condition: good (used), functionality: fully functional, total height: 730 mm, throat depth: 90 mm, installation height: 120 mm, pressing force: 1 t, overall weight: 50 kg, total width: 300 mm, total length: 350 mm, table width: 100 mm, table length: 135 mm, stroke length: 12 mm, compressed air connection: 8 bar, air pressure: 8 bar, Technical data : power 15 kN max. nominal pressure at 8 bar power connection 220 volt . mounting , round 15 mm throat 90 mm Gsdox E Twmjpfx Ah Dsuk ram stroke approx. 12 mm table approx. 100 x 135 mm . Max. Installation height 170 mm Plunger top Adjustment upper part approx. 100 mm . Width x depth approx. 0.3 x 0.35 m Height approx. 0,73 m Weight estimated approx. 50 kg . Maintenance unit Foot switch with pneumatic release (2-hand is not safe for manual insertion) Stroke counter . .. Ongoing purchase of German second-hand machines without NC or CNC controls

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Guodpfx Ashfwqzjh Dek Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: good (used), table size: 350x350mm Godpfxjfm A Amj Ah Djuk

Condition: new, Year of construction: 2025, table width: 900 mm, table length: 1,800 mm, pressing force: 150 t, stroke adjustment: 120 mm, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, STANDARD FEATURES: • Steel Construction Body • Pneumatic Clutch Brake • Additional T-Slot Plate • 8-Bearing Ram • Adjustable Stroke on Single Connecting Rod • Balancer Piston in Ram • Fully Automatic Fine Lubrication System • PLC Control System • Piano-Type Control Panel • Touch LCD Screen • Motor Reverse Function • Overload Hydraulic Safety Device • Motorized Ram Adjustment Mechanism • Photoelectric Safety Guard • Enclosed Gear Group in Oil Reservoir • Double Coil Safety Valve • Compliance with CE Standards OPTIONAL FEATURES: • Press Feeding Systems • Scrap Ejection Systems • Sliding Cover in Front of Table • Custom Dies as per Request TECHNICAL SPECIFICATIONS: CAPACITY: 150 TON USABLE LOWER TABLE DIMENSIONS: 900X1800 MM USABLE UPPER TABLE DIMENSIONS: 900X1800 MM FIXED STROKE LENGTH: 200 MM NOMINAL TONNAGE: 7 mm STROKES PER MINUTE (SPM): 60 MAXIMUM SHUT HEIGHT (CLOSED DIE HEIGHT): 500 MM MINIMUM SHUT HEIGHT (CLOSED DIE HEIGHT): 380 MM SIDE WINDOW WIDTH: ?? ADJUSTMENT (RAM ADJUSTMENT): 120 MM NUMBER OF CONNECTING RODS: 2 PCS NUMBER OF ECCENTRIC SHAFTS (CRANKSHAFTS): 2 PCS SAFETY DEVICE: HYDRAULIC PANEL COMPONENTS: SIEMENS - SCHNEIDER LUBRICATION SYSTEM: AUTOMATIC SCREEN – PLC – INVERTER: SIEMENS - PILZ SAFETY BARRIER: LEUZE OPERATION MODE: 4 POSITIONS DIE MEMORY: 99 PCS INSTALLATION TYPE: FLOOR-MOUNTED BODY TYPE: MONOBLOCK MOTOR POWER: 22 kW Gedpfsvtwztex Ah Dsuk MOTOR SPEED (RPM): 1450 APPROXIMATE MACHINE SIZE (L x W x D): 4500x3000x2000 mm APPROXIMATE WEIGHT: 20 TON COUNTRY OF ORIGIN: TURKEY

Condition: new, Year of construction: 2025, neu 2025 070125 Jänner 2026, Zwischenverk Türkei 40200 € 767.82 € Godpfx Ahowiqvzs Djuk 40 to 2.5 mm 450 mm 650 mm 150 mm 1 - 80 mm 125 1/min 4 75 mm 40 mm 225 mm 300 mm 835 mm 4 kW 1350 mm 1370 mm 2330 mm 2100 kg welded steel construction body frame 4-fold ram guide pneumatic clutch-brake combination photocell light barriers mechanical overload protection two hand and foot pedal control manual adjustable stroke manual central lubrication according to CE rules OPTION: Vibration pads € 192,-- Bolster plate € 830,--

Condition: used, Year of construction: 1972, Pressure 800 t distance between columns 3250 mm Gjdpfsvuuhyex Ah Dsuk stroke 1100 mm Distance table/ram, stroke up 1900 mm Table surface area 3100 x 1900 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Die cushion area in table 2500 x 1800 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 200 mm Die cushion area in ram 2200 x 1000 mm Ram surface 3100 x 1900 mm Side window 900 mm Oil volume 4700 l Power capacity 200,0 kW Dimensions (WxDxH) 4,95 x 3,3 x 10,2 m Height above floor 7,05 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: new, The KNUTH KP 100 A is a robust Hydraulic Press from the H-Frame Hydraulic Presses category, crafted in Europe with high-quality components for superior performance in deep drawing, forming, and notching processes. This powerful machine offers force capabilities ranging from 40 to 400 tons, making it suitable for both test and series production. Designed with a perfectly welded frame for high rigidity, it features a large hydraulic cylinder that moves the solid ram plate with excellent stability, supported by heavy-duty self-lubricating circular guides. The KP 100 A includes user-friendly amenities such as a mobile two-hand control panel, adjustable limit switches, and T-slots on the work table for easy tool clamping. Additionally, it is equipped with a low-maintenance hydraulic system and precision-machined components that ensure minimal wear and long-lasting reliability. You can benefit from custom solutions tailored to your needs while enjoying the flexibility of multi-shift operation and the potential for Industry 4.0 integration. To explore the possibilities of this H-Frame Hydraulic Press or to request a quote, contact us today. Godpfxoxhdzfo Ah Deuk

Condition: new, New hydraulic high speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Gsdpfx Aef Rt Irsh Deuk

Condition: good (used), Pressure: 25 t cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. ram stroke - max.: 20 mm Table surface usable: WxD: 440 x 360 mm Gusdpjfim Dwofx Ah Djk

Condition: new, Year of construction: 2025, table width: 1,000 mm, table length: 2,000 mm, pressing force: 200 t, stroke adjustment: 120 mm, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, STANDARD FEATURES: • Steel Construction Body • Pneumatic Clutch Brake • Additional T-Slot Extension Plate • 8-Guided Slide/Ram • Adjustable Stroke on Single Connecting Rod • Balancer Piston on Slide/Ram • Fully Automatic Thin Oil Lubrication System • PLC Control System • Piano-Type Control Panel • Touchscreen LCD Display • Reverse Motor Motion • Overload Hydraulic Safety Device • Motorized Ram Adjustment Mechanism • Light Curtain Safety Guard • Enclosed Gear Group in Oil Reservoir Gujdpfxevtwz Te Ah Dok • Dual Coil Safety Valve • Compliance with CE Standards OPTIONAL FEATURES: • Press Feeding Systems • Scrap Discharge Systems • Sliding Cover in Front of Table • 1 Set of Dies TECHNICAL SPECIFICATIONS: CAPACITY: 200 TON USABLE LOWER TABLE AREA: 1000 x 2000 mm USABLE UPPER TABLE AREA: 1000 x 2000 mm FIXED STROKE LENGTH: 200 mm RATED TONNAGE: 7 mm STROKES PER MINUTE (SPM): 25 - 45 MAX. CLOSED DIE HEIGHT: 600 mm MIN. CLOSED DIE HEIGHT: 480 mm SIDE WINDOW OPENING: 600 x 600 mm ADJUSTMENT (RAM ADJUSTMENT): 120 mm NUMBER OF CONNECTING RODS: 2 NUMBER OF ECCENTRIC SHAFTS (CRANKS): 2 SAFETY DEVICE: HYDRAULIC PANEL SWITCHGEAR: SIEMENS – SCHNEIDER LUBRICATION SYSTEM: AUTOMATIC SCREEN – PLC – INVERTER: SIEMENS – PILZ SAFETY BARRIER: LEUZE OPERATING MODES: 4 POSITIONS DIE MEMORY: 99 SETS INSTALLATION TYPE: FLOOR MOUNTED BODY TYPE: MONOBLOCK MOTOR POWER: 22 kW – IE3 MOTOR SPEED (RPM): 1450 APPROXIMATE MACHINE DIMENSIONS (L x W x H): 4600 x 3000 x 2000 mm APPROXIMATE WEIGHT: 28,000 kg Country of Origin: Turkey

Condition: used, Year of construction: 1973, Pressure 1600 t distance between columns 4100 mm slide stroke 1450 mm Distance table/ram, stroke up 2750 mm distance table/blank holder, stroke up 2200 Table surface area 4000 x 2200 mm ram pressure 1000 t Pressure of blank holder 600 t stroke of blankholder 1000 mm blank holder surface 4050 x 2200 mm Ram surface 3200 x 1650 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm die cushion area 3500 x 1600 mm Gujdpfovut Ifox Ah Dok Side window 1100 mm Oil volume 9000 l Power capacity 390,0 kW Weight 250,0 t Dimensions (WxDxH) 5,95 x 4,3 x 10,5 m Height above floor 8,6 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram stored in dismantled condition - Video at seller’s site before dismantling available

Condition: new, The 2 T Workshop Press is a versatile Manual Workshop Press that excels in driving in and out arbors, bushings, spindles, and pins, as well as keyway broaching. This compact machine is characterized by its heavy one-piece casting design, offering stability and reliability for a wide range of applications in mechanics and repair shops. With a press force of 10 kN and a throat depth of 145 mm, it is particularly suited for press-fitting and pulling bearings, aligning, and bending tasks. The simple functionality of this press, combined with the included operator manual, makes it an essential tool for any workshop. As a robust offering from KNUTH, the 2 T Workshop Press stands ready for your pressing needs, allowing you to handle tasks with efficiency. Don't hesitate to order online and enhance your toolkit with this reliable Manual Workshop Press today. Gusdpfx Ahou E I E Re Dsk

Condition: new, New High speed press from min. 63t up to max. 630t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Guodpfogayiaex Ah Djk

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm Gsdpfxevut Dyj Ah Douk table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: new, The 1 T Workshop Press is a versatile Manual Workshop Press that excels in driving in and out arbors, bushings, spindles, and pins, as well as keyway broaching. This compact machine is characterized by its heavy one-piece casting design, offering stability and reliability for a wide range of applications in mechanics and repair shops. With a press force of 5 kN and a throat depth of 100 mm, it is particularly suited for press-fitting and pulling bearings, aligning, and bending tasks. The simple functionality of this press, combined with the included operator manual, makes it an essential tool for any workshop. As a product of KNUTH, you can trust in its performance and durability. To enhance your workshop, consider this indispensable Manual Workshop Press and request a quote today to ensure you meet all your pressing needs. Gujdpfeu E I Ewex Ah Dsk

Condition: new, New Progressive die press from 350t up to max.1200t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Guedpfsgayk Rex Ah Dek

Condition: new, The KNWP 30 M is a reliable manual workshop press within the Workshop Presses category, ideal for various pressing tasks, including assembly, testing, and straightening workpieces. Made in Europe, this robust machine combines a rigid, machined weldment structure with a versatile hydraulic pump, which can be operated via both hand and foot controls. Its sophisticated two-step hydraulics allow for seamless transitions between quick-stroke and work stroke, while an automatic reset piston ensures efficient operation, adjustable via a throttle valve. The support table, easily adjustable in height, enhances usability and comes with a multi-function die for effective straightening of both flat materials and corrugation. Whether for straightening beams or material testing, the KNWP 30 M provides the power of a 30 t pressure force with a total piston stroke of 160 mm, making it a must-have in any mechanical workshop, garage, or locksmith's shop. For more information or to place your order, please request a quote today. Guodpfxeuyh Sgo Ah Djk

Condition: new, Brand new Servo press ISGEC from min. 300t up to max. 4000t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Guedpfxoihfxij Ah Djk

Condition: new, Brand new tandem press line ISGEC from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Gusdpfjihfwtex Ah Dsk

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Gedpfx Ahohtaaqj Dsuk Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: new, New Transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Guodpfx Ahef Rt Ubs Dsk