Used thickness planer for sale (206)

Condition: excellent (used), CATALOGUE NUMBER 8024 TECHNICAL DATA - roller width 640mm - max. thickness of workpiece 210mm – from top to bottom: - pawls - toothed infeed roller, pulling Dcodpfx Ajztquvsizjp - pressure roller - planing roller - pressure roller - smooth outfeed roller, pulling, metal - 2 adjustable sliding rollers at the bottom - motor approx. 5.5kW - manual table lifting - 2 feed speeds - diameter of dust extraction nozzle 130mm - dimensions L/W/H 1300x1200x1200mm - weight 950kg ADVANTAGES - German made - used thickness planer, very good condition Net price: 8900 PLN Net price: 2070 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 7.5 kW (10.20 HP), planing width: 625 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (min.): 5,000 rpm, overall weight: 1,000 kg, 4-knife TERSA cutter head for planer Motor power 7.5 kW Positioning control for the thickness table Segmented infeed roller Segmented pressure bar Feed speeds of 7 + 14 m/min Table extension Planing width 625 mm, chip removal up to 8 mm, planing height 3.5-305 mm Thickness table mounted on four support spindles and with 4-point guidance. Dcodpez Dkftsfx Aizep Heavily ribbed cast iron table, finely planed Modern control panel ergonomically positioned. Electric thickness table adjustment with LED display. Buttons for adjusting in rapid or slow mode, Adjustment accurate to 1/10 mm; integrated operating hour counter. Electronic starting and braking system. Electronic, wear-free brake for safe stopping of the cutter head. Infeed roller in rubber and two rubber outfeed rollers (high quality, low wear) Segmented pressure bar, rotary knob with scale, for adjusting the pressure (preload) of the outfeed pressure bar Two feed speeds 7 + 14 m/min; electrically switchable, also during planing Thickness hood with carpet support, can be used as a storage area for wood. Dust extraction port Ø 160 mm, to the left (can also be on the right – can be easily converted on site) Air velocity 22 m/s Integrated tool storage compartment for operating tools and planing knives Electrical equipment according to VDE/EN 60204 with main switch, emergency stop button and 2nd emergency stop button on the discharge side, winding protection, undervoltage protection, contact for controlling the dust extraction, accessories: 1 set of knives installed, operating tools, grease gun, operating manual Weight: approx. 1000 kg CE-compliant, BG-Holzstaubgeprüft No. HM 23001 Workplace-related emission values dB(A) according to DIN 45635 Part 1650 Idle noise approx. 69 dB(A), operating noise approx. 79 dB(A) Workplace-related dust emission value: 0.44 mg/m³

Condition: used, Year of construction: 2003, Width 520mm Motor 7.5kw 380V Rollers in the table Split entry roller Sharpening tree 4 chisels Dcodpfx Ae Ahx Szsizop Maximum height 250mm Electrical display

Condition: used, Year of construction: 1999, Width 520 mm Low electrical ascent 4 sharpening files 7.5 kW motor 380 V Sold as is Dcodpfxoz St Emo Aizep Revision to be done

Condition: excellent (used), Catalog number: 7987 TECHNICAL DATA - Shaft width: 500mm - Number of knives: 4 pcs - Max. thickness of workpiece: 230mm - From top to bottom: - Pawls - Toothed, pulling, and twisting infeed shaft - Pressure roller - Planing shaft - Pressure roller - Smooth, pulling outfeed shaft Dodpfx Aiezu Savozjcp - Motor: 4kW - Electric table lifting - 2 feed speed settings: 8/12.5 m/min - Dimensions (L/W/H): 1000x1000x1050mm - Weight: 620kg ADVANTAGES - Made in Italy - Used thickness planer, very good condition Net price: 14900 PLN Net price: 3465 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with larger fluctuations)

Condition: good (used), Year of construction: 1994, functionality: fully functional, planing width: 800 mm, overall weight: 1,600 kg, height adjustment type: electric, number of planer blades: 4, planing height: 200 mm, Equipment: motor brake, Year of manufacture: 1994 Planing width: 800 mm Maximum planing height: 200 mm Number of knives: 4 Minimum workpiece length: 500 mm Minimum planing height: 5 mm Speed: 4,500 rpm Table length: 1,100 mm Number of feed rollers: 1 Main motor: 11 kW Maximum feed: 32 m/min Infinitely variable feed: Yes Table rollers: Yes Digital thickness display: Yes Sectional pressure roller: Yes Electric height adjustment: Yes Cutter shaft: Centrifugal shaft Centrifugal shaft: Tersa Outfeed: Steel roller Total power: 16 kW Approx. weight: 1,600 kg Space required (length): 1.2 m Dcedpfx Aswma N Ssizep Space required (width): 1.65 m Space required (height) : 1.8 m

Condition: excellent (used), Catalog number: 8124 TECHNICAL DATA - Shaft width: 510mm - 4-knife shaft - Max. thickness of workpiece on thicknesser: 200mm - Max. thickness of workpiece on side heads (3-sided): 100mm - Top: - Pawls - Toothed infeed shaft - Pressure roller - Planing shaft - Smooth outfeed shaft - Bottom: Dodpfx Aisz Rpkcszjcp - Guide strip - Adjustable rollers in the lower table, 2 pcs - Rear: - Side spindles + pressure roller, 2 pcs - Spindle height: 100mm - Spindle diameter: 30mm - Adjustable spindles (left/right) - Side spindle motors: 2 x approx. 1.5kW - Main motor: 7.5kW - 2 types of feed speed - Dust extraction port: 2 x 100mm, 1 x 120mm - Overall dimensions (L/W/H): 1700x1300x1160mm - Weight: 1103kg ADVANTAGES - Polish-made - Shaft with 4 knives - Used planer, very good condition Net price: 14900 PLN Net price: 3470 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), 2 blades Working width: 62 cm Working height: 20 cm 5.5 kW motor Dedezvnzropfx Aizscp

Condition: used, Year of construction: 1979, Working width: 630 mm Planing height: 220 mm Planing shaft: Strip cutter Number of cutters: 4 Height adjustment: Handwheel Planing thickness indicator: Scale Feed rate: infinitely variable Infeed roller: Rubber Outfeed roller: Rubber Table rollers: yes Motor power: 5.5 kW Dcodpfx Aoz I Iutsizsp Dust extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1000 kg

Condition: used, Year of construction: 1992, working width: 520 mm working height: 250 mm cutter head: strip-knive number of blades: 4 height adjustment: electrically read out workpiece thickness: scale feed speed: 2 speeds infeed roller: steel outfeed roller: steel table roller: yes motor power: 5,5 kW suction connection: 140mm machine length: 1200 mm machine width: 1400 mm Dcedpfx Aisyt E Rajzep weight: ca. 900kg

Condition: excellent (used), CATALOGUE NUMBER 7573 Technical specifications: - shaft width 640mm - number of knives 4 pcs - max. thickness of workpiece 270mm - from above: - pawls - toothed infeed shaft, pull-type Djdpfx Aieztw I Nezocp - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, pull-type - from below: - adjustable rollers in the lower table, 2 pcs - motor 7.5kW - electric table lifting - lifting motor 0.75kW - 2 types of feed speed - feed motor 1.1kW - diameter of dust extraction port 160mm - dimensions L/W/H 1150x1240x1170mm - weight 1073kg ADVANTAGES - Polish production - electric table lifting - DTR documentation - used thicknesser, very good condition Net price: 26900 PLN Net price: 6256 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 2011, with new infeed roller Machine in operation used in top condition low mileage cleaned Dcjdpfxozzfacs Aizop functionally tested partially refurbished Manufacturer: Felder Type: D 951 Year of manufacture: 2011 Machine No.: 431.01.365.11 GS-tested CE type-tested GS-tested for wood dust Segmented pressure beam Rubber infeed roller Rubber outfeed roller Feed rate infinitely adjustable Feed rate m/min: 4 - 16 Number of knives: 4 automatic motor brake Digital display for planing height electric height adjustment with tip fine adjustment Sound insulation Motor kW: 5.5 Planing width approx. mm: 500 Planing height approx. mm: 250 Dust extraction connection mm: 140 Space requirement approx. L x W x H mm: 100x100x1100 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: excellent (used), working width 530mm working height 300mm 4-knives shaft electric table regulation electronic display of table position Dodpfjy N N I Nex Aizecp main motor power 4kW feeding speed 5/8/12/19 m/min year 2002

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 520 mm, number of blades: 4, total width: 1,100 mm, total height: 1,200 mm, overall weight: 600 kg, – Made in Italy – In very good condition TECHNICAL SPECIFICATIONS: Dsdpfxe Agfhqo Aizjcp – Planing width: 520 mm – Planning height: 240 mm – Main motor: 5.5 kW – Electric height adjustment – Four feed speed settings – Four TERSA knives – Shaft diameter: 110 mm – Shaft speed: 4500 RPM – Segmented, helical toothed infeed shaft – Rubber-covered outfeed shaft – Nozzle diameter: 150 mm – Dimensions (L/W/H): 120x110x125 – Weight: ~600 kg

Condition: excellent (used), CATALOGUE NUMBER 7990 Dcsdsztxgaspfx Aizjp TECHNICAL DATA - Shaft width 630mm - Max thickness of workpiece 200mm – Top: - Ratchets - Toothed feed roller - Pressure rollers - Planing roller - Pressure rollers - Smooth withdrawal roller – Bottom: - Adjustable rollers in the lower bed – 2 pcs - Motor approximately 5.5kW - 2 feed speed settings - Feed motor 0.55kW - Dimensions L/W/H 1200x130x1100mm - Weight 1093kg ADVANTAGES - German-made - Used thickness planer, very good condition Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: excellent (used), CATALOGUE NUMBER 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm Top: - feed rollers - infeed roller, sequential - pressure rollers, 2 rows - infeed roller, sequential - planing roller 500mm, 4-knife, 7.5kW motor - pressure rollers - outfeed roller, smooth - pressure roller on the outfeed Bottom: - adjustable infeed table + pressure roller - smooth feed roller Dcjdpfxozxhdfo Aizjp - planing roller 500mm, 4-knife, 5.5kW motor - 2 smooth feed rollers - side pressure roller Rear: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - stepless feed speed adjustment 8-30m/min - electric table lifting - dust extraction nozzle diameters 2x145mm, 2x160mm - dimensions L/W/H 2050x1700x1700mm - weight 2100kg ADVANTAGES – ideal for processing flooring panels – electric table lifting – Czech production – used planer, very good condition Net price: 37900 PLN Net price: 8814 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, Bäuerle, Model DM 71 * Manufacturer: Bäuerle * Machine Type: DM 71 Dcodpfx Asz S Ny Tjizsp * Machine Number: 9 * Series: E 4 * Voltage: 380 V * Power: 10 HP (approx. 7.35 kW)

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 60.04.102.21, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input current: 40 A, input frequency: 50 Hz, type of input current: AC, planing width: 630 mm, actuation type: electric, total length of planing tables: 2,250 mm, total width: 1,200 mm, total height: 1,200 mm, overall weight: 1,100 kg, Equipment: CE marking, documentation/manual, Thickness planer Exact 63 with: four-spindle lift table, feed roller, outfeed table, steplessly adjustable feed, Silent Power planer shaft with HM reversible knives, max. pass-through height 300 mm, max. pass-through width 630 mm. Max. material removal per pass: 10 mm. Estimated operating hours: 200. Single ownership. Dcsdpfjym Sfqex Aizsp

Condition: excellent (used), CATALOGUE NUMBER: 7915 Dodpezrltqjfx Aizscp TECHNICAL SPECIFICATIONS: Shaft width: 640mm Number of knives: 4 pcs Maximum thickness of the workpiece: 200mm – Top: Latches/deflectors Toothed infeed roller, pulling Pressure roller Planing roller Pressure roller Smooth outfeed roller, pulling – Bottom: Adjustable rollers in the lower bed: 2 pcs Motor: 7kW Infinitely variable feed speed control Dimensions (L/W/H): 1800x1250x1150mm Weight: 1250kg ADVANTAGES: – Bulgarian production – Infinitely variable feed speed control – Used thickness planer, very good condition Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: V 117812, input voltage: 380 V, input current: 11 A, Machine is in very good condition - Electric height adjustment and handwheel adjustment - Newly fitted bearings - New knives installed - Gearbox lubricated - New protective lamellae installed - Planing width: 630 mm - Planing height: 250 mm - Feed speed: 8–20 m/min - Extraction nozzle: 160 mm - Weight approx. 870 kg - Rubber-coated infeed and outfeed rollers - Two-knife cutterblock with strip planing knives Djdpfx Aisyt Nx Uezecp - Central lubrication - Star-delta switch

Condition: excellent (used), CATALOGUE NUMBER 7186 TECHNICAL DATA - max. planing width 510mm - max. planing height, two-sided 170mm - max. planing height, four-sided 100mm *from above: Dodpfx Ajztalqoizjcp - toothed infeed roller - pawls - toothed feed roller - pressure roller - planing roller 510mm, 4-knife (2 knives installed) 4kW - smooth feed roller, outfeed *from below: - guide strip - slip roller – adjustable table with roller, up/down - planing roller 510mm, 2-knife 4kW - 2 smooth, slip rollers, adjustable *from the rear: - 2 side spindles + pressure roller - 1) vertical right spindle 100mm 2.35kW - 2) vertical left spindle 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual planing thickness adjustment - 4 feed speed settings - feed motor 1.5kW - dimensions L/W/H 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, flooring, etc. – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 32900 PLN Net price: 7651 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: like new (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, planing width: 530 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,600 rpm, total length of planing tables: 900 mm, overall weight: 690 kg, Equipment: CE marking, documentation/manual, HOUFEK Thicknesser 530 mm | 5.5 kW | 4 Knives | Electric Lift Table | 2017 HOUFEK!! HOUFEK THICKNESSER! Professional wood thicknesser from 2017. Used machine, fully functional, ready to work. Solid construction with a weight of 690 kg ensures stability and high-quality material processing. TECHNICAL SPECIFICATIONS: - Maximum material width: 530 mm - Minimum material length: 320 mm - Working height range: 3–250 mm - Table length: 900 mm - Table width: 550 mm - Main motor power: 5.5 kW (7.5 HP) - Spindle speed: 4600 rpm - Number of knives: 4 pcs (TERSA) - Spindle diameter: 120 mm - Spindle length: 550 mm - Feed motor power: 0.58 / 0.75 kW - Feed speed: 4 / 8 m/min - Dust extraction port: 150 mm - Power supply: 400 V / 50 Hz - Machine dimensions: 1050 × 1000 × 1200 mm - Weight: 690 kg Equipment: Electric table height adjustment Mechanical table position measurement Automatic star/delta switch Segmental roller pressure Serrated feed roller Four-point table support Two feed speeds: 4 and 8 m/min CE certificate The machine is ideal for a carpentry workshop, sawmill, or company involved in the production of furniture and wooden elements. Condition: used, normal wear and tear appropriate for its age. Possible to inspect on-site. It is possible to test the machine on-site. Financing options are available through leasing or installments. The machine has been technically inspected and is ready for further operation. It is possible to start and test the machine on-site, which allows you to assess its condition and operating parameters before purchase. For the convenience of our customers, we offer financing options in the form of leasing or installments. We assist with the formalities and selection of the most advantageous financing option. Dsdpszc U Nksfx Aizjcp WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl tel: 664 335 465 tel: 530 632 386

Condition: excellent (used), TECHNICAL DATA - Shaft width 500mm - Number of knives: 4 - Maximum thickness of the workpiece: 230mm From above: - Ratchets - Toothed, pulling, sequential feed shaft - Pressure rollers - Planing shaft - Pressure roller - Smooth, pulling discharge shaft From below: - Adjustable pulling rollers in the lower bed, 2 pcs - Motor: 5.5kW - Electric bed lifting - Bed lifting motor: 0.37kW Dcsdpfxsztzi Dj Aizjp - Smooth feed rate adjustment - Diameter of dust extraction nozzle: 150mm - Dimensions (L/W/H): 1000x1000x1350mm - Weight: 690kg ADVANTAGES - Electric bed lifting - 4-knife shaft - Pulling rollers in the lower bed - Used thickness planer, very good condition Net price: 16,900 PLN Net price: 3,930 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7172 TECHNICAL DATA - roller width 640mm - max. thickness of workpiece 230mm - 4-knife roller from top: - pawls Dedsztxmyspfx Aizecp - toothed feed roller, pull type - pressure roller - planing roller - pressure roller - smooth feed roller, pull type, metal - 2 adjustable sliding rollers at the bottom, mounted on the table - 5.5kW motor - electric table lifting, approx. 0.25kW - 2 feed speed types, 0.75kW - diameter of extraction nozzle 160mm - dimensions (L/W/H) 1320x1270x1380mm - weight 903kg ADVANTAGES - made in Germany - used thickness planer, very good condition Net price: 21900 PLN Net price: 5093 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Condition: used, Year of construction: 2015, Four-knife 120 mm cutterblock Four selectable feed speeds Heavy cast iron construction Precision thicknessing table with central column guidance Dsdpfx Aiez N Hfbszscp 520 mm working capacity 2015 CE