Used 3 Axis Cnc Milling Machine for sale (1,02,406)

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Hjdpfx Aieu Tln Nerew Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Year of construction: 1989, condition: ready for operation (used), Weight: 1.5t, operating hours unknown, with documentation, machine vices and fixtures are available as accessories, the machine ran in one shift operation and was serviced regularly. An inspection on site is possible. Hodpfxezbb Spo Airow

Condition: new, Year of construction: 2023, machine/vehicle number: 320542/B, functionality: fully functional, number of axes: 3, controller manufacturer: TPA, CNC Drilling and Milling Machine Manufacturer: Vitap Type: K3 New machine Through-feed processing, workpiece machining from below, and automatic workpiece return to the operator Develop an individual class: - With this machine, you can perform many different milling operations in addition to grooving and drilling, from simple edge milling to milling shapes and letters. - We do not limit your creativity. Easy entry into CNC technology: - TPA makes it easy for you: Whether drilling, grooving, linear milling, contour milling, or milling letters. - The CAD software clearly displays the machining operations. - Particularly clear is the programming of the work steps on the individual workpiece sides. - You can mirror machining operations with a mouse click. - You can either enter the starting points precisely or determine them by clicking on the virtual workpiece. Vitap Bar Nesting - efficient and time-saving - This patented software produces entire corpus elements from a long workpiece. - You insert the long workpiece, and when you remove the first finished element, the machining of the next element continues directly. The DDT feed system (double dynamic transport) - 2 clamps enable uninterrupted workpiece transport. Hjdpszvduusfx Airow - The operator inserts the workpiece until it reaches the stop. - Both clamps then grip the workpiece and position it precisely. - During machining, both clamps communicate with each other, so that clamp 2 grips before clamp 1 releases. - This ensures a constant feed rate even during linear milling. 3 controlled axes: - X axis - DDT feed - Y axis - Drilling head travel - Z axis - Drilling - Double "0" reference: New laser generation for detecting the beginning and end of the workpiece. The program can readjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge material. - Side stops with rollers, consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning to the 0 line - Automatic 4-position tool changer - Adjustable zero point - No workpiece length limitation - Monitor LCD TFT 20" - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data - Number of independent, vertical spindles: 12 - Number of independent, horizontal spindles on the X axis: (2+2) - Number of horizontal drilling spindles on the Y axis: (2+2) - 1 saw (100mm) - Electro spindle 5 kW with ISO30 taper (RPM [contact removed]) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited, Y 1250 mm, Z 50 mm - Min. workpiece dimensions: X 270, Y 150 (70op), Z 3 mm - Feed rate: 25 m/min - Spindle speed: 3600 RPM - Saw speed: 7000 RPM - Max. horizontal tool: 12mm - Max. drilling depth horizontally on the X and Y axis: 35mm - Max. drilling depth vertically: 43 mm - Max. vertical tool: 35mm - Motor: 1.7 kW - Adjustable zero point for 4-sided formatting - CE compliant Optional against additional charge

Condition: used, CNC turning machine MONFORTS Type RNC 300 MultiTurn with driven tools and Y-axis Hodpfx Aiezfau Asrsw Year of manufacture 2005 CNC control FANUC Series 18i-TB Swinging diameter over bed 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 Volt, 50 Hz, 63 Amp. - hydrostatic guideways for the X, Y and Z axes - with tailstock, chuck and collet chuck - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - collet chuck HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 driven tools with collet ER 25 - chip conveyor with integrated coolant system - approx. 20,000 operating hours Footprint of the machine with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 630 mm, total height: 2,420 mm, total width: 1,862 mm, total length: 3,390 mm, overall weight: 2,450 kg, WAGNER MILLING MACHINE MODEL: BUT 1270 2VS 3-AXIS CNC X-AXIS: 1000 mm Y-AXIS: 450 mm Z-AXIS: 630 mm Hjdpfez Ei S Ijx Airsw DRILLING DIAMETER: 40 USED MACHINE INTERNAL CODE: SVR 442

Condition: ready for operation (used), Year of construction: 2003, Available immediately ex-works: Reckermann 3-axis machining center Type VMC 105 E Year of manufacture 2003 Heidenhain TNC 410 M 20-tool changer SK 40 tool holder Spindle speeds up to 8,000 rpm Drive power 7.5 / 11 kW Table size 1520 x 515 mm Travel distances X/Y/Z 1050/560/520 mm Feed rate 1 – 5000 mm/min Hodo Aa Ircspfx Airjw Rapid traverse rates up to 15,000 mm/min Weight 4 tons Accessories: vices, tool holders Electronic handwheel Price: Euro 8,500.00 plus VAT ex-works.

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 1,850 mm, Manufacturer: FPT Year: 2007 CNC Control: HEIDENHAIN Axis Travels X-axis: 7,000 mm Y-axis: 1,210 mm Z-axis: 1,850 mm Milling Head / Rotary Axes Hjdpfx Aezznupsirsw A-axis: 270° B-axis: -180° / +180° C-axis: 360° The machine is currently installed at our factory in Istanbul, Türkiye and is in working condition. The machine can be inspected under power at our facility. Further technical information, photos and videos can be provided upon request.

Condition: excellent (used), functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 550 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, HERMLE UWF 1001 CNC milling machine With CNC control, HEIDENHAIN / Type: TNC 155 Machine probe / coolant system Hedpfx Aijz Dum Ujrsw Enclosure / cabin / control cabinet: 1260 x 500 x 1700 mm Travel ranges 700 x 550 x 550 mm / Clamping area, table surface: 1000 x 490 mm

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,050 mm, Equipment: documentation/manual, Asquith Butler 3000 Bed Type Milling Machine, Siemens Sinumeric 840C CNC Control, Auto Indexing Head, (Live 5 Hedpfsw A Aiasx Airow Axis orthogonal head) ,3.1 x 1.2m Table, Travels x-3m,y-1000,z-1050. New 1995.

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Hedpfx Aiswrdu Aerew Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Year of construction: 2002, condition: ready for operation (used), A CNC 3-axis bed milling machine by Auerbach is offered. Travels X/Y/Z: 2000mm/1000mm/900mm, table load: 6000kg, tool interface: SK50, tool stations: 46, spindle speed: 3500rpm, operating hours: 38000h, control: Heidenhain TNC426, including SEMPUCO KFU-2/45/021 universal milling head, weight: 200kg. Equipped with a 3D infrared probe, electronic handwheel, chip conveyor with coolant system, large air conditioning unit for the electrical cabinet, milling table with 5 T-slots at 22mm. Machine dimensions X/Y/Z: 5500mm/4100mm/2700mm, weight: 13t. Complete machine overhaul by the manufacturer in 2015. Drive motor for the Z-axis available as a spare part. Documentation available. Inspection possible by appointment. Hsdpfx Aszlt R Roirew

Condition: used, Mikron UM 710/900 Universal Milling Machine High-precision universal tool milling machine from the Swiss quality manufacturer MIKRON, model UM 710/900. The machine comes from a well-maintained environment and impresses with the renowned Mikron precision and the generous working area (up to 900 mm travel in X). It is ideally suited for toolmaking, prototype construction, training, or demanding repair workshops. Technical data at a glance (manufacturer's specifications): Working area & axes: Longitudinal travel (X-axis): 710 / 900 mm Transverse travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed range: adjustable (vertical & horizontal) Main drive & feed: Spindle drive power: 11 kW (at 44% duty cycle) / 7.5 kW (at 100% duty cycle) Feed rate (X, Y): 0 – 10,000 mm/min (programmable) Feed rate (Z): 0 – 8,000 mm/min (programmable) Rapid traverse (X, Y / Z): 10 m/min / 8 m/min Clamping table (rotary table): Clamping surface: 600 x 1,200 mm T-slots: 9 pieces (14-H7, spacing 63 mm) Max. table load: 500 kg Electrical system, dimensions & weights: Connected power: Total installed rated power 21.5 kW Operating voltage: 3 x 400 V - 50 Hz Coolant system: 150-liter capacity Machine weight: approx. 4,300 kg (including safety enclosure) Product video Hsdszcqcgspfx Airow "Everything from a single source: We would be happy to offer you a suitable bank financing solution for your project." You can find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2007, condition: ready for operation (used), Hjdpfx Aeyt E D Tjirsw

Condition: used, Year of construction: 1988, Deckel FP4MA 2204 – CNC Machining Center - General overhaul in 2022 - Heidenain TNC320 CNC control - CNC or manual control possible Hedpfx Ae Adr R Doirjw - Movable vertical milling head with retractable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearbox - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct path measurement - Collision protection coupling in the Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools, and tool cart Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle head: 150 mm Main drive: - Pole-changing three-phase brake motor: Gearbox with right/left rotation - Power: 3.7 / 4.4 kW - Spindle speed: 63 - 3150 rpm (18 steps) - Step jump: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring pack - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z axis: 3000 mm/min Table carriage: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (with safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and rotary table: approx. 1830 kg - Operating voltage: 400 V - Total connection value: 12.5 kVA - Floor load: 3000 kg/m²

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC-Steuerung Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 Hodezkpupjpfx Airow - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: used, The EMMEGI PHANTOMATIC T4 A is a 3-axis CNC machining centre, manufactured in 2005, designed for milling, drilling, slotting and tapping operations on aluminium, PVC and light alloy profiles. The machine is equipped with a 3-axis CNC control system (X, Y, Z), a high-speed electrospindle and an automatic tool magazine with 5 + 1 positions, allowing automatic tool changes during the machining cycle. It also features a dual-output angle head for horizontal and lateral machining operations, providing greater flexibility when processing profiles. The worktable is equipped with 4 automatically positioned pneumatic clamps for secure clamping and accurate positioning of the profiles. Main Technical Specifications CNC control: 3 controlled axes (X, Y, Z) Tool magazine: Automatic Angle head: Dual-output angle head for horizontal machining operations Pneumatic clamps: 4 Clamp positioning: Automatic Installed power: 7.5 kW Power supply: 400 V, three-phase, 50 Hz Machine weight: 1,950 kg Year of manufacture: 2005 Hodpfj Agv A Rjx Airow CE marking: Present

Condition: new, Year of construction: 2026, The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machine's machining capabilities, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1500x3000mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Included with the Milling Machine Becker KVT 3.140 Vacuum Pump Manufacturer: TechnologieCNC Model: 1530 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in slow passages: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1500x3000x300mm - Hybrid table (vacuum+T-slot) Control: NK-105 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Dimensions: For transport - 365 / 210 / 220 Machine assembled and ready to work - 365 / 245 / 230 Hybrid table, i.e. vacuum table enabling non-invasive element fixing, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Hsdpfxstu S Srj Airjw Machine control using the DSP NK-105 controller A tool height sensor is included A central oil lubrication system for trolleys and guides as standard The drive is transferred via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Hedpfx Aijzavyforjw

Condition: refurbished (used), Year of construction: 2017, functionality: limited functionality, WMW UNION CNC table-type boring mill, completely overhauled and modernized in 2017. The machine has been rarely used since then. It is currently disassembled and kept in storage. Cannot be inspected under power!!! Hode Af U Dvepfx Airew

Condition: used, Year of manufacture: 2014 Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 Hjdpfx Asx Hwhxoirew - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport weight [kg]: 4500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2021, operating hours: 5,100 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,175 mm, controller model: Heidenhain 640 control, overall weight: 37,500 kg, spindle speed (max.): 30,000 rpm, operating hours of spindle: 5,100 h, coolant supply: 80 bar, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 120, We offer in good condition Grob G750 Gen1 from 2021 with only 5100 spindle hours. Hsdpfo Af Uxuox Airow X-Axis travel: 1000 mm Y-Axis travel: 1100 mm Z-Axis travel: 1175 mm With following options: HSK-A63 120 tools ATC 30.000 RPM Spindle Internal coolant 80 bar Touchprobe Heidenhain TS460 Blum Laser Kinematic quick set including LANG Vices

Condition: used, Year of construction: 2017, operating hours: 21,000 h, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 15,000 rpm, spindle speed (min.): 20 rpm, table width: 1,100 mm, table load: 1,200 kg, table length: 3,200 mm, CNC Bed Milling Machine Manufacturer: DMG MORI Model: DMF 260-11 linear Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Main spindle renewed Technical specifications: Travel distances: - X-axis travel: 2,600 mm - Y-axis travel: 1,100 mm - Z-axis travel: 900 mm Main spindle: - Speed range: 20 - 15,000 rpm - Drive power (40/100%): 46 / 30 kW - Torque (40/100%): 200 / 130 Nm - Tool holder: SK 40 Worktable: - Fixed table with integrated rotary table - Clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool stations: 60 positions - Chip-to-chip time: 7.5 s - Power-on hours: approx. 21,000 h - Operating hours: approx. 9,200 h Technical features: Hsdpfx Aio Agr A Usrew - ICS (internal coolant supply) 40 bar - Coolant spray gun - Rotating viewing window - Tropical package - Dynamic package Accessories: - Paper band filter 600l - Chip conveyor - Heidenhain TS 649 DMG touch probe - 3D quickSET - 2x Oil and emulsion mist separators - 4-color signal lamp - Electronic handwheel Accessories, pictured tools, and clamping devices are only included in the scope of delivery if noted in the additional information.

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5921, overall weight: 12,000 kg, input current: 41 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 4,300 mm, feed length Y-axis: 2,300 mm, feed length Z-axis: 1,200 mm, 5-axis CNC machining center 2 retractable tables, 1700x1425 mm each Linear axes X-4300, Y-2300, Z-1200 mm Rotary axes B +/- 120, C +/- 240 Tool magazines, 2 x 6 positions Hedpfoz H Slmex Airsw OSAI control system Bertronic remote control with teach-in functions 7.5 kW electrospindle, HSK-63F 2 vacuum pumps, 100 m3/hour, two clamping zones (can be combined into one large zone) Exhaust hoods for chip removal around the tables in the work area RENISHAW TS27 probe for tool length measurement and rotary axis calibration Free-standing electrical control cabinet Complete enclosure of the machine to protect against dust and noise CE marking The machine is installed and connected – it can be tested.

Condition: good (used), Year of construction: 1996, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Travel distances: X= 600, Y= 400, Z= 400 mm Table size: 900 x 480 mm Spindle speed: 40 - 4,000 rpm Dimensions LxWxH: 2500 x 2200 x 2200 mm Hedpfoy Eyfwjx Airew Weight: approx. 3,000 kg

Condition: good (used), Year of construction: 2010, 5-axis CNC machining center - universal - Manufacturer: CHIRON Machine Model: Mill 2000 Control: Siemens 840D Year of manufacture: 2010 TECHNICAL DATA Travel ranges - X-axis: (mm) 2,000 - Y-axis: (mm) 500 - Z-axis: (mm) 550 Rapid traverse rate: X/Y/Z (mm/min) 60,000 Spindle - Internal coolant supply (ICS): (bar) - Spindle speed max.: (rpm) 12,000 Tool magazine - Tool holder: SK40 - Tool places: 40 Machine table - Size of fixed table L x W: (mm) 2,000 x 550 Number of rotary tables: 2 - Manufacturer: Peiseler - Model: ZAS 160 Number of steady rests: 2 - Manufacturer: Peiseler - Model: GP MK 3 - Actuation: hydraulic Hedpfx Aioz E Nvgjrew EQUIPMENT FEATURES + Siemens 840D control + Partition for alternating machining + Rotary tables, 2, 1 on the right, 1 on the left. Manufacturer: Peiseler, Model ZAS 160 + Steady rests, 2, 1 on the right, 1 on the left. Manufacturer: Peiseler, Model GP MK3 + ICS pump 40.6 bar + Chip conveyor, screw conveyor + Paper band filter + Air blow gun, 2, 1 on the right, 1 on the left + Chip flushing gun, 2, 1 on the right, 1 on the left + Electronic mini handwheel with emergency stop + Air-conditioned control cabinet + Fire extinguishing system + Hydraulic system + Signal light, 3-color Subject to changes and errors in the technical data and information.