Kauz Maschinenhandel GmbH

Condition: used, Year of construction: 2016, No. 3222 Horizontal panel saw HOLZMA Optimat HPP 130/32/32 Used, year of construction 2016 Machine still in operation, expected to be available from 01.09.2025 Cutting length 3200 mm Saw blade projection 60 mm Main saw motor 7.5 kW Main saw blade 300 x 4 x 60 mm Scoring saw blade 150 x 4.5 - 5.5 x 45 mm 2 clamps 3 air cushion tables 650 mm wide 3 roller elements on front side LKT 1 grooving program manual Operating software CADmatic 4 PRACTIVE Monitor 19" TFT display V program pusher up to 60 m/min V saw carriage up to 60 m/min Machine dimensions 5307 x 6037 mm LB Sale on behalf of customer, ex location near 73479 Ellwangen, without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Gjlhcewixxqocqtjbl Sold as is Technical specifications, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, No. 3221 Vacuum dryer / drying chamber DWT / IWT MD 2600 x 13000 Used Gbelhccowiw Evoqtel The machine is still connected to power and heating, but has not been used for 3 years Dryer diameter 2600 mm Dryer length 13000 mm Package length 13000 mm Package width 1200 mm Package height 2100 mm Gross capacity 33 m3 Net capacity 20 m3 sawn timber or 15 m3 logs Electrical connection 44 kW Electrical consumption 15 kW/h Water drain 50 mm Water connection 25 mm Heat connection 87 kW, 85 °C hot water at the dryer Heat consumption 500 kcal per liter of moisture or 0.6 kW per liter of moisture Including BUDERUS B305/160 boiler, heat output 141 - 160 kW The boiler is operated with natural gas The system is supplied as a fully assembled unit Boiler cylindrical on 3 supports Hydraulic, fully automatic boiler lock Boiler material solid stainless steel to DIN, x5 Cr Ni 189 150 mm insulation, clad with 1 mm galvanized sheet steel Rails in stainless steel, spacing 600 mm 1 rail bridge in front of the boiler 4 trolleys for loading and unloading, length 3200 mm each 12 fans with Siemens motors, 2 spare motors Heating coil as stainless steel finned tubes with aluminum fins, length 150 m, surface 250 m2, diameter 25 mm Flow and return pipe diameter 80 mm Heating medium 85 °C Hot water at the consumer Circulation pump capacity 75 m3/h Vacuum pump BUSCH LX 0260 B, year of construction 2013 Nominal suction capacity min. 200 m³/h / max. 455 m³/h / final pressure 33 hPa (mbar) 1 electric condenser for condensing the vapor 3 fans for cooling or condensing the vapors PLC control Tracks in front of the dryer 14000 x 600 mm The entire system stands on a concrete floor and can be lifted with a crane and loaded onto trucks Transport dimensions approx. 18000 mm long, 3050 mm high (without cooling system) Sale on behalf of the customer, ex location near 09131 Chemnitz, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, Year of construction: 2020, No. 3219 CNC machining center HOMAG CENTATEQ P-110 Venture BMG110/31/F/R Used, year of construction 2020 CNC-controlled processing center in moving gantry design, for milling and drilling workpieces made of wood or wood-like materials Travel speeds: X/Y-axis 60 m/min / X-axis 35 m/min / Y-axis 50 m/min / Z-axis 15 m/min - Program-controlled suction hood - Max. workpiece length, all units: single loading 3100 mm / pendulum loading 1025 mm - Max. workpiece length, tool diameter 25 mm: single loading 3275 mm / pendulum loading 1025 mm - Max. workpiece width, front stop: All units 1250 mm / milling tool diameter 25 mm 1250 mm - Maximum workpiece width, rear stop: All units 1230 mm / milling tool diameter 25 mm 1405 mm - Workpiece thickness: Max. 260 mm including clamping device - Operating voltage 400 Volt, 50 Hz - EC conformity (CE) - BUMPER safety technology with pressure-sensitive switching buffers in accordance with EN1760-3 - Drilling gear V12/32MM High Speed 7500, 1500 - 7500 rpm frequency-controlled, 2.3 kW - Grooving saw 0°/90° tiltable, 1500 - 7500 rpm frequency-controlled - H4X drilling unit, 1500 - 7500 rpm frequency-controlled - Drilling unit H2Y, 1500 - 7500 rpm frequency-controlled - Processing spindle 12 kW DRIVE5CS, frequency converter for electronic speed control from 1500 - 24000 rpm, 12 kW for S6 operation, 9 kW for S1 operation - Unit carrier for two Z-axes - Tool changer magazine 8 places at the rear - Linear tool changer fixed on the side 10 places - Tool length control - Tool holder saw DRIVE5CS - Fine-cutting saw blade diameter 350 mm - Basic structure raster table /31 - Raster table top - Lateral and longitudinal stop pins 140 mm - Two-part vacuum system for pendulum operation - Vacuum connection for templates - Supply unit for pneumatic clamping elements, right and left working field - Laser positioning aid - Vacuum clamp for grid table 140 x 130 x 45 mm LBH - Multi-clamp for R-table 10 - 100 mm - 10 m sealing cord diameter 8 mm for grid table - Vacuum system 290 / 345 m3/h - Energy saving function - POWERCONTROL with POWERTOUCH Gbjlhewhwqvjccqtsl - PC keyboard: German - USB hard disk for image - Mobile operating terminal (10 m) - Permanently mounted control cabinet - TAPIO READY - Network connection Ethernet CNC - Manual operation wired for run-in operation - Comfort package operation - woodWOP for machine - woodWOP DXF-Import Basic (single user license) - Record and evaluate machine data - MMR - woodWOP Office Professional (single user license) - Language selection German - Documentation on data carrier - Documentation on paper - INTELLISERVICENET Sale on behalf of the customer, ex location near 73479 Ellwangen, without dismantling, transportation and assembly Disassembly, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2004, Condition: used, No. 3121 Vacuum dryer / drying chamber Kronseder KCT 3000 / WP Used, year of construction 2004 Heating with electricity or hot water possible Wood capacity 42 m3 Length of the wood stack max. 15800 mm Width of the wood stack 1200 mm Height of the wood pile 2150 mm Connection for electric heating 70 kW Average consumption 5 kW/h Power connection 120 kW Average consumption 15 - 18 kW/h Stainless steel container Tank diameter 2600 mm Vacuum pump BUSCH MM 1142 AV Cooling machine BITZER 4J22Y EUROVAC control unit, with PC connection External dimensions: Total length of the system 19500 mm Width of the system 2800 mm Height of the system 3100 mm Weight approx. 16000 kg Sold on behalf of the customer, ex location near 91443 Scheinfeld, without dismantling, without transportation and assembly Dismantling and loading by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Gbsljwhv Hcshccqtol Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1994, No. 04470 Electro-hydraulic veneer press Joos HP 90 Used, year of construction 1994 Press area 2550 x 1350 LW Gold anodized heating plates, electrically heated Total pressing pressure 90 tons Opening width 400 mm 4 press cylinders each 90 mm diameter Specific pressing pressure with full load 2.75 kg/cm2 Specific pressing pressure with 2 m2 load 4.58 kg/cm2 Operating pressure 355 bar Thickness of the heating plates approx. 51 mm Connected load per plate 9.1 kW Operation with rotary switch Push-button control for opening / closing / stop 2 safety ripcords (all-round) Automatic activation (overrun) of the press cylinders when pressure is released The “Goldeloxal-Decor D.B.G.M.” system makes the surface of the valuable heating plates extremely hard. This results in no scoring, reduced consumption of release agents, shorter working time, no film wear and higher quality veneer work. At the heart of the hydraulic quality press is the hydraulic unit, securely installed in the center of the lower part of the press. This design prevents damage to the motor, pump and other units. The motor, valves and two-stage high-pressure pump are maintenance-free at Joos. With the dynamic piston bearing, the pistons are not bolted to the pressure table but instead rest dynamically on a planed support surface under the pressure table. The table is prevented from tilting and moving by a column guide. A precision rack and pinion parallel guide ensures the synchronization of the printing table. Transport dimensions approx. 2950 x 1560 x 2160 mm LWH Weight approx. 3600 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Gslhcewhc Awocqtjbl For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2009, table length: 2,600 mm, power: 7.5 kW (10.20 HP), table width: 920 mm, No. 04469 Spindle moulder / swivel spindle milling machine Casolin F 45 KL EVO Used, year of construction 2009 Very heavy version with full equipment Control unit EVO EL 2 with programming functions The body of the machine consists of one part Spindle swivels +/- 45.5° on both sides 4-axis control EVO Spindle diameter 30 mm Effective height of the spindle 140 mm Maximum tool diameter for profile milling 250 mm Maximum tool diameter for tenoning 300 mm Motor power 7.5 kW Direction of rotation right/left Speeds 3000 / 4500 / 6000 / 8000 / 10000 rpm Table with extensions 2600 x 920 mm LW Including 3-roller feed unit Maggi 2 suction connections each 120 mm diameter Transport dimensions approx. 2600 x 1500 x 2000 mm LWH Weight approx. 1350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Gbelewhck Uohccqtel Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, No. 10015 Plasma cutter Jäckle CUTTER 150 Used Air-cooled, step-switched CUTTER-series for “hard work” According to our customer, the machine is fully functional and can be tested during an on-site viewing 2 cutting steps Plasma gas: compressed air HF-ignition Connection for plasma torch: central Thermal overload protection Very robust and reliable design Clear and service-friendly design Suitable for gouging Supply voltage 400 V, 50 Hz Fuse (slow) 62 A Power draw 43 kVA Setting range 75 / 150 A Open circuit voltage 350 V Duty cycle 40°C / 70% 150 A - 140 V / 100% 75 A - 110 V Quality cut 35 mm Severance cut 45 mm System of protection IP 22 Insulation class H (180°C) System of cooling F Compressed-air supply 5.5 bar / 230 l/min Transport dimensions approx. 1200 x 800 x 1000 mm LWH Weight approx. 165 kg Sale on behalf of customer, ex location near 85221 Dachau, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Gslhcjwbkcfecqtobl Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, No. 10014 Tire changer CEMB B 312 Used, year of construction 1997 According to our customer, the machine is fully functional and can be tested during an on-site viewing 0.55 kW 400 V, 1.65 A, 50 Hz Air supply 8 - 10 kg/cm2 Transport dimensions approx. 1300 x 800 x 1800 mm LWH Sale on behalf of customer, ex location near 85221 Dachau, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Gbelhcewbi N Rjcqtel Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Year of construction: 1994, Condition: used, No. 10013 Cable stripping machine Eldan M3 Used, year of construction 1994 According to our customer, the machine is fully functional and can be tested during an on-site inspection Cable stripper from Eldan Recycling Denmark Cutting speed / Capacity up to 30 m/min Cable diameter 10 - 75 mm Motor 7.5 kW 400 V, 50 Hz Transport dimensions approx. 1300 x 900 x 1500 mm LWH Gbjlhowbi Akeccqtsl Weight approx. 800 kg Sale on behalf of customer, ex location near 85221 Dachau, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, No. 3218 CNC machining center SCM Record 120S Used, can still be viewed in operation Gbelhccev Uz Hvsqtjl Compact CNC machining center for all milling and drilling work in solid wood, chipboard, MDF and plastic Technical data (according to manufacturer's brochure): Travel X-Y-Z 2850 x 1355 x 250 mm High-performance milling spindle / milling unit 7.5 kW, 900 - 18000 rpm Automatic tool changer with 10 ISO 30 tool holders Drilling unit with 5 individually retrievable vertical drilling spindles in X 4 horizontal drilling spindles Drill holder M 10 Routolink control with 10.5” color monitor Sale on behalf of customer, ex location near 69124 Heidelberg, without disassembly, transport and assembly Disassembly, loading and transport by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2006, No. 3217 Single-shaft shredder WEIMA ECO 600 Used, year of construction 2006 Feed opening 600 x 800 mm LW Hopper capacity 0.6 m3 Rotor diameter 252 mm Rotor length 600 mm Rotor speed 60 - 100 rpm Motor power 15 kW Suction diameter 160 mm Gbolhccov Tyv Hsqtjl Transport dimensions approx. 1600 x 1150 x 1655 mm LWH Weight approx. 1000 kg Sale on behalf of customer, ex location near 69124 Heidelberg, without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, No. 3216 Timber repair & cosmetics machine Wintersteiger TRC ECO M Used, still in operation Machine for wood repairs and “wood cosmetics” / Parquet repair machine The TRC-ECO-M is a fully automatic machine for the repair and cosmetic treatment of wooden surfaces. It offers an outstanding combination of state-of-the-art scanning technology, precise filling and intelligent automation. With two injection heads, two different colors can be used to achieve perfect results. Gbeljv Tdqhjhccqtsl - Automated detection and repair: The integrated scanner system detects damaged areas with high precision and initiates the appropriate processing steps - Two injection heads: Enables the filling of two different colors for optimal adaptation to the wood structure - Thermoplastic filling material: Fast curing to ensure immediate further processing - Modular transport system: The TRC ECO M has various roller conveyors for a smooth material flow - High-quality repair for parquet, furniture, panels and other wood products - Reduced waste thanks to precise and material-friendly injection - Fast amortization due to high automation and reduction of manual work - Maximum flexibility thanks to individually adaptable programs and color selections Scanner unit: High-resolution scanner for detecting damaged areas Injection units: 2 separate units for the use of different colors Cooling unit: For fast hardening of the filling material Melting unit: For optimum processing of the material Control: Touchscreen interface for intuitive operation - Output: Up to approx. 600m² per shift with rustic sorting Sale on behalf of customer, ex location Austria, without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2011, No. 3215 Double-end tenoner CELASCHI TEAM 60 Used, year of construction 2011, still in operation The SCM CELASCHI TEAM 60 is a high-precision machine for the production of parquet and other wood-based materials. It enables efficient processing with a high feed speed and exact profiling. This machine is part of a machine line for parquet production. This also includes a pre-edging and cross-cutting unit. There is a 90-degree angle transfer between the CELASCHI and the edging, which is included in the scope of delivery if required. The machine is in good working order. It has been regularly serviced. Feed speed: 40 to over 200 m/min Workpiece width: 58 mm to 300 mm Workpiece thickness: 6 mm to over 35 mm Workpiece length: 300 mm to max. 5000 mm Units: 4 units per side for both longitudinal and cross profiling Suitable for various wood-based materials High feed speeds for maximum productivity Precise longitudinal and cross profiling thanks to multiple units The machine is designed for high production output and enables continuous processing of workpieces with precise profiling Wide belt sander not included in the scope of delivery (optionally available) Incl. LEUCO diamond tool set Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Gelhcsv Stikocqtebl Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Gbelhccov Sthgjqtjl Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2001, No. 04467 Gbjlhev Stgceccqtol Double mitre saw Schleicher GS 09 Unipos S Used, year of construction 2001 This high-performance precision saw was developed as a universal cutting saw for wood, aluminium and plastic. The saw stroke is pneumatic. The workpiece is clamped using 2 vertical and 2 horizontal clamping cylinders. External cutting height (fence side) max. 120 mm Cutting height inside (rebate side) max. 105 mm Cutting width max. 75 mm Motor power of the saws 2 x 1.5 kW Sawing process triggered by two-hand operation or via Unipos S Cutting length with Unipos approx. 1000 mm Saw blade diameter 2 x 350 mm, bore 30 mm Speed 2800 rpm Suction connection 2 x 80 mm The machine has a conventional fence rail with a scale up to 1500 mm and an electronic measuring system Unipos S. With the help of the Unipos S, the position of the fence slide can be read from a digital display. It is possible to display either the respective external dimension or the internal or rebate dimension. The pneumatic gripper feed positions the workpieces via a pneumatic cylinder, which moves against stops. The tongs can grip workpiece cross-sections up to 30 x 50 mm. Transport dimensions approx. 2500 x 1000 x 1900 mm LWH Weight approx. 400 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Golov Si Szshccqtobl Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2007, No. 04468 Single-shaft shredder ZENO ZTLL 800 x 1000 Used, year of construction 2007 3200 operating hours This chipper is used for shredding wood, paper, plastic, residual waste, etc. Inlet cross-section 800 x 1000 mm Hole diameter in screen 25 mm Rotor diameter 300 mm Number of knives 20 Drive motor 15 kW Soft start control CE-compliant Transport dimensions 1500 x 960 x 1500 mm LWH Weight approx. 1700 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location Gslsv Rpvwehccqtjbl

Condition: used, No. 04466 Veneer package shears & cross veneer shears Langzauner FPS 3600 & FPS 800 Used Veneer package shears in combination with a cross-cut system Extremely stable construction of the lower part as well as the pressure and knife beam Electromotive width stop adjustment, fine adjustment by handwheel Width display for absolute dimension and strip dimension Fully hydraulic drive of the pressure beam and shear blade Adjustable angle fence with graduation Safety equipment with two-hand operation and light barrier safety device Langzauner FPS 800 cross-cut veneer shears for cutting single veneers or veneers in a package The Langzauner FPS 800 can be set up on the right or left side of the longitudinal line and connected to the control system Technical data Langzauner FPS 3600: Cutting length 3600 mm Cutting height 50 mm Width stop 600 mm Shear blade and pressure bar force 6000 kp each Technical data Langzauner FPS 800: Cutting length 800 mm Cutting height 50 mm Transport dimensions approx. 4400 x 1800 x 1500 mm LWH Weight approx. 4000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Golhcev Rnlwecqtsbl Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2005, No. 3035 CNC machining center HOMAG OPTIMAT PROFI BAZ 322/60/K Used, year of construction 2005 Functional, can still be viewed in operation Milling, edge banding, finishing and drilling center to produce furniture parts, solid wood or similar materials Two independent Y-axes for main spindle and gluing unit 360º, with single strip feed Workpiece dimensions (depending on material and tool): - Workpiece length max. 6000 mm with single loading - Workpiece width front stop max. 1525 mm for routing - Workpiece width rear fence max. 1700 mm - Workpiece thickness max. 60 mm with standard clamp when using the gluing unit / max. 300 mm incl. clamping device when used as a router - Working height lower edge of workpiece 950 mm - POWER CONTROL control with PC85 - Main spindle 18.5 kW - Disk changer 18-fold - Drilling head 12 spindles - Saw-cutting unit - Gluing unit 360º / single strip, edge thickness max. 3 mm - Combined flush trimming and trimming unit - Clamping table integrated in the machine bed - 10 clamping consoles with tubeless vacuum guide - 10 retractable longitudinal stops, stroke 140 mm - 3 retractable side stops for pendulum processing including mirror bolts - 18 vacuum clamps 160 x 115 x 100 mm LBH - 2 double-acting vacuum clamps 125 x 75 x 100 mm LBH - 4 auxiliary stops on the rear of the table for oversized workpieces - Working area and position of the stop pins according to technical data - 4 plug-in connections with single-circuit compressed air system for connecting pneumatic clamping elements - Windows XP (US) embedded operating system - PC85 CNC core - PC85 software package with graphical operating programs: woodWOP / woodWOP Wizard / Schuler MDE Basic / woodDesign for AV-P - Remote diagnosis via modem - 2 reinforced vacuum pumps 100/140 m3/h - Tool length max. 200 mm from lower edge of motor spindle - Tool diameter max. 180 mm for routing tools / max. 200 mm for sanding tools - Speed range continuously programmable from 1000 - 24000 rpm C-axis for Flex-5 unit Drilling head 12 spindles - 6 spindles in X-direction, 7 spindles in Y-direction - Arrangement of the spindles in L-shape - Spindle distance 32 mm Sawing and snipping unit for tool changer for grooves and cuts from above at any angle, as well as right-angled notches Additional Y-axis for gluing unit for quick use of the gluing unit Gluing unit 360º / single strip / Quickmelt melting unit Combined flush trimming and trimming unit for tool changer - Edge thickness max. 4 mm - Unlimited swiveling via C-axis Sold on behalf of the customer, ex location near 88662 Überlingen, without dismantling, transportation and assembly Disassembly, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Gbslov Rfbcshccqtsl Terms of delivery: ex location

Condition: used, No. 3212 Machine package joinery Ott, HOLZ-HER, Martin, WEINIG Used, sold only as a package Consisting of: - Pendulum saw Bäuerle PKS Roller conveyor 2000 mm & 3000 mm - 2 sprayers Wagner - Paint mist extraction wall AL-KO mobile - Slot drilling machine Frommia 270 - Column drilling machine FLOTT 13 STW - Veneer saw Scheer FM 8 - 3100 With pneumatic clamping beam - Dowel boring machine Gannomat RB 110 - Blum hardware drilling machine - Cross-cut saw Omga - Extraction system AL-KO Mobil Jet 2000 - Edge banding machine Ott Pacific V 6 - F Aggregates: Joining (pre-milling) 2 x 1.5 kW Fine router, flush bevel 0° / 15° / 30° / 45° (2 carbide insert cutterheads) Fine router, radius R2 - R5 (2 carbide insert cutterheads) Scraper, automatic feed (2 carbide blades) Corner rounding AR-2 (2 carbide insert cutterheads) Edge cleaning (2 oscillating brushes) - Vertical panel saw HOLZ-HER 1216 Cutting dimensions: 5300 x 2200 mm - Angular system for window production WEINIG Unicontrol 5P - Chain cutter Rapid - Chain cutter HAFFNER SL 100 - Briquetting press Spänex SHB 50 incl. filter system - Edge grinding machine MAKA - Table milling machine Martin T 25 - 4-sided planer WEINIG Profimat 22 N - CNC processing center SCM Record 20 - Frame press Hess Variant - Long belt sander Johannsen T 82 K (pneumatic) - Wide belt sander Sandingmaster KCSB 1100 - Cross-cut and mitre saw Graule - Compressor Schneider 620-270 ST, incl. air dryer - Chipper / shredder WEIMA Eco 600 Gbjlsv N Hbuohccqtjl Sale on behalf of customer, ex location near 69124 Heidelberg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in the description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, No. 10012 Feed hopper Rema Used Gbslhov N E Iyjccqtjl Metal plate conveyor / steel plate belt Defective gearbox (Bonfiglioli) Drive power 15 kW Belt width 2000 mm Axis length 10000 mm The system has been out of operation since the end of January 2025 due to gearbox damage Without output conveyor Transport dimensions approx. 15000 x 3000 x 4000 / 5500 mm LWH Sale on behalf of customer, ex location near 78628 Rottweil, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1996, No. 3211 Vertical panel saw HOLZ-HER 1216 Used, year of construction 1996 Freestanding machine Cutting length 5300 mm Cutting height 2200 mm Saw unit can be swiveled by 90° Scoring unit Passage height max. 2205 mm Workpiece thickness max. 80 mm Swivel-mounted control panel, digital display for cutting parameters Display automatically switches to the correct dimension Pneumatic lifting and lowering of the transport rollers Pneumatic locking for the set dimension when cutting vertically Pneumatic locking for horizontal cutting Pneumatic immersion of the saw unit CE marking Sale on behalf of customer, ex location near 69124 Heidelberg, without disassembly, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Gbelev Na R Aehccqtel Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2001, No. 3210 Edge banding machine Ott Pacific V 6 - F Used, year of construction 2001 Hot-melt adhesive hot-cold process Application roller with synchronized and counter-rotation Adjustable infeed ruler 0 - 12 mm Milling 0.2 - 6 mm Workpiece thickness 8 - 42 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Compressed air required 6 bar Feed speed 12 m/min Aggregates: Joining (pre-milling) 2 x 1.5 kW Fine milling machine, flush chamfer 0° / 15° / 30° / 45° (2 carbide insert cutterheads) Fine router, radius R2 - R5 (2 carbide insert cutterheads) Scraper, automatic feed (2 carbide blades) Gelhov Naxtoccqtebl Corner rounding AR-2 (2 carbide insert cutterheads) Edge cleaning (2 oscillating brushes) Transport dimensions approx. 5300 x 1300 x 1250 mm LWH Weight approx. 2200 kg Sale on behalf of customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, No. 3207 Milling tool Leitz, Wigo Used, partly unused Approx. 40 discs with setting bushes and scales Various diameters Gbelhccev Hr Nreqtol Milling tongue and groove profiles for wall and ceiling panelling For all milling machines, four-sided planing and profiling machines Workpiece material: Softwood and hardwood Adjustable tongue and groove cutter set with spacer rings for adaption to different wood thicknesses, tongue and groove widths Groove width infinitely adjustable Sale on behalf of customer, ex location near 73430 Aalen Shipping optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, No. 3205 Copy router Reichenbacher RMF Used For copying, enlarging or reducing a model (wooden figure) Creates a wooden blank (wooden figure) in the desired size Clamping length max. 1000 mm The machine requires a base area of approx. 2500 x 2500 mm LW Sale on behalf of customer, from location near 95485 Warmensteinach, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Gbolhccqjv Hdg Netol Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location