Used circular saws for sale (119)

Condition: used, Year of construction: 1998, Hydraulic chainsaw Blade maximum diameter 500mm Small stroke cutting capacity: 250/120mm Double stroke cutting capacity: 600/120mm Command by double buttons Motor 7.5kw Small run: 36 cups/min Double feed: 18 cuts/min 400V 350 cm stop with rollers with digital display 1 m roller conveyor at discharge Machine documents Machine footprint: Bwedpoyngb Aefx Amfsw Chainsaw: 110cm/140cm/h175cm (with pallet) Conveyor discharge: 370cm/110cm/h90cm Input conveyor: 70cm/65cm/h90cm Dimensions of the assembly: 530cm/140cm

Condition: excellent (used), functionality: fully functional, LOESER AA 200 – Cross-cutting and chamfering machine for dowels Diameter range: 6–18 mm Ø Bwjdpfxsz R Tm No Amfew Minimum dowel/rod length: 15 mm Output: approx. 2000 dowels/hour Motor power: 0.55 kW Cutting tool/blade speed: 7150 rpm

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices Bwodpocbq Nwofx Amfsw >> The working width can also be increased by conversion

Condition: used, Year of construction: 2019, cutting width (max.): 3,000 mm, saw blade diameter: 300 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Saw unit 1 (tiltable) Motor power: 6 kW Bwsdpfszf H Hrsx Amfow Saw unit 2 (tiltable) Motor power: 0.75 kW Working width max.: 3,000 mm Saw blade diameter: 300 mm MACHINE DETAILS Connection power: 7 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before pick-up and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8572

Condition: used, Year of construction: 2024, Squaring machine with tilting blade Motorized blade lifting Manual blade inclination Technical data : anodized aluminum carriage mm. 3200/3800 main blade motor kW 5.5 Bedstl D Enepfx Amfsww scoring blade motor kW 1.1 max. blade diameter 350 mm blade tiltable at 45° max. cutting height with 90° blade 100 mm max. cutting height with blade at 45° 70 mm aluminum telescopic rod suspended "bridge" protection on the blade cutting width on the parallel guide mm.1500 dimensions of the fixed surface mm.1200x750

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, power: 5.5 kW (7.48 HP), main motor 5.5 kW saw can be lowered up/down Bwedpoqwg Dwjfx Amfjw saw set at an angle of 45 degrees side carriage with aluminum guide table top 100×90 cm Maximum saw diameter 400 mm Belt adjustable saw rotation 3000/4000/5500 rpm

Condition: used, Circular saw Manufacturer: Karl Mrozek Power: 5.5kw Year of manufacture: 1983 Table size (mm): 1180x670 Cutting depth mm max.: 50 - 125 Cutting width (mm): 1250 Bedpowtd Hzefx Amfjww

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: three-phase, cutting width (max.): 610 mm, saw blade diameter: 600 mm, - Year of manufacture: 1997 - Two pneumatic stops TECHNICAL SPECIFICATIONS: - Saw blade diameter: 600 mm - Max cutting width: 610 mm (with element height 30 mm) - Max cutting height: 160 mm (with element width 380 mm) - Motor power: 7.5 kW - Sawdust extraction outlet: 2 x 100 mm - Two pneumatic stops for cutting to set length - Hydraulic element clamping and blade movement - Stepless cutting speed adjustment - Infeed table: 1000 mm / 470 mm D-90 mm - Outfeed table: 1500 mm / 500 mm D-60 mm - Spindle diameter: 30 mm - Blade rotational speed: 2800 rpm Transport dimensions - 280x165x140 cm Bwsdpfxex Ekmro Amfsw - Weight: 600 kg

Condition: used, Stromab Mitre Saw for Boards up to 250 mm, Height 100 mm Bwodpfx Amornbnkefew

Condition: used, Year of construction: 2018, Saw blade diameter: 190 mm Year of manufacture: 2018 Power: 1200 W Speed: 5200 min-1 Includes saw blade, 230 volts. Bwedpfjzywzpsx Amfow Condition is good. Price: € 75,- including VAT, multiple units in stock.

Condition: good (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 400 mm, max blade diameter 400 mm cutting height adjustment angle adjustment 0″- 45″ spindle diameter 30 mm blade guard Bodpfxjqwduxs Amfeww max. cutting width with guide bar 1270 mm 2 types of rotation speed 3000 / 4500rpm table top dimensions 1020 x 1120 mm worktop extension worktop extension undercutter max diameter of undercutting saw blade 130 mm diameter of undercutter spindle 20 mm undercutter motor 0,75 kW motor 4 kW overall dimensions L/W/H 2930 x 2600 x 1450 mm weight 711 kg

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts one unique panel) - Minimum length of the workpiece: mm 250 (ca.) - Maximum length of the workpiece: mm 2700 (ca.) - Minimum width of the workpiece: mm 124 (ca.) - Maximum width of the workpiece: mm 1200 (ca.) - Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) - Max feeding speed: m/min 50 (ca.) - Total installed power Kw 82 Along with the following groups: Bwjdpfx Ajyx S N Uemfew POS. 1 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 2 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 3 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 4 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 5 Lower main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) POS. 6 Upper main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) OPTIONAL: soundproof and safety enclosure (cabine)

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, Bwjdpfjtqt T Iex Amfsw - complete with hydrostation, - electrical cabinet.

Condition: used, Year of construction: 1993, Camam brand equalizer Bsdpfx Ajy Ud R Njmfsww

Condition: good (used), 5kW motor Bwodpfx Amsqwdxuefew Ability to cut at an angle Solid cast iron

Condition: excellent (used), Year of construction: 1975, max disc diameter 400mm blade adjustable up/down and at an angle spindle diameter 30mm blade guard max cutting height 135mm max width of cutting at the guide 700mm Bedpfoqwdw Nex Amfoww dimensions of table top 1020x900mm motor 4kW diameter of the suction nozzle 110mm dimensions length/width/height 2140x1440x960mm weight 543kg

Condition: good (used), Year of construction: 1990, functionality: fully functional, power: 4 kW (5.44 HP), max disc diameter 400mm blade adjustable up/down and at an angle spindle diameter 30mm blade guard max cutting height 135mm max width of cutting at the guide 700mm dimensions of table top 1020x900mm motor 4kW diameter of the suction nozzle 110mm dimensions length/width/height 2140x1440x960mm Bwjdpfx Amoqwdwzefew weight 543kg

Condition: new, Cutting height 175 - 210 mm Motor output 15 kW cutting width 620 mm Bedpez St Sajfx Amfjww Cutting length 5200 mm Dimensions (L/W/H) 7000 x 1470 x 850 mm

Condition: new, Cutting height 175 mm Motor output 15 kW cutting width 620 mm Cutting length 5200 mm Bwsdpfxsz St R Aj Amfjw Dimensions (L/W/H) 7000 x 1470 x 850 mm

Condition: good (used), 3 cutting units Saw blade diameter: 550 mm Max spacing between outermost blades: 10 m Bodsxvmq Sspfx Amfjww Motors: 3 x 3 kW 2-stage feed Power supply: 400 V

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NPC330 is a high-performance beam saw designed for fast and precise cutting of MDF, particleboard, plywood and other wood-based panels. It is the ideal solution for furniture factories seeking high throughput and consistent accuracy. The saw carriage is driven by a 2 kW servo motor with rack and pinion transmission, reaching cutting speeds up to 90 m/min and return speeds up to 120 m/min. The powerful software package includes cutting optimization, work process management, cutting simulation, error display, and automatic label printing for efficient production tracking. Key Features Cutting height: up to 120 mm Cutting width: 3270 mm Automatic pressure beam adjusts to the total height of the panel stack for maximum efficiency Air flotation table ensures scratch-free and easy panel handling 10 pneumatic clamps (optional 12) for secure fixing and precise positioning Servo side alignment for perfectly perpendicular cuts Full protection system: operator hand protection, piano-type blade cover, optional safety fence & light barrier Quick-change main saw blade and one-click scoring blade adjustment Automatic lubrication system for longer machine life and lower maintenance costs Industrial control cabinet with international brand components, 21.5” touchscreen, PC (i5 CPU, 8 GB RAM) Technical Specifications Max. cutting length: 3270 mm Max. cutting height: 90 mm (optional 120 mm) Main saw motor: 15 kW (optional 18.5 kW), 3910 rpm Scoring saw motor: 4300 rpm Main saw blade: Ø380 mm (shaft Ø60 mm) Scoring saw blade: Ø200 mm (shaft Ø45 mm) Feed speed: 90 m/min (return 120 m/min) Total installed power: 24.2 kW Machine dimensions: 6900 × 5400 × 1820 mm Weight: 4,560 kg Power supply: 380V / 50Hz / 3-phase Bwedpfxexcwwpe Amfjw Air requirement: 0.6 MPa Dust extraction: Ø150 mm × 3, min. speed 28 m/s Benefits for Manufacturers High productivity: package cutting with fast forward and return speed Excellent accuracy: ±0.03 mm thanks to heavy-duty frame and pneumatic clamping Digital optimization: AutoCut software included to minimize waste and optimize cutting plans Maximum safety: full machine guarding, light barrier, and emergency stop Operator-friendly: air flotation table and servo-driven feeding system for effortless panel handling

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, saw blade diameter: 550 mm, total length: 4,920 mm, total width: 1,450 mm, total height: 1,200 mm, overall weight: 600 kg, Equipment: CE marking, documentation/manual, saw blade guard, OMEC TA185 band saw Maximum cutting height: 180mm Bodpjzu R Hhefx Amfeww Maximum cutting width: 900mm Saw blade diameter: 550mm Pneumatic material clamping Pneumatic saw blade feed Saw blade control via two buttons Main motor power: 5.5kW Machine dimensions: 492x145x120cm (H) Weight: 600kg

Condition: used, functionality: fully functional, Crosscut saw with marking recognition. With this saw, cross-sections of 300 x 60 mm can be cut. It was previously used in front of a compact finger-jointing machine to cut out defects according to markings. These feed units are very good and ensure safe transport, as the lower rollers are pneumatically connected (coupled) with the upper ones. Bedjwxm Eqspfx Amfjww

Condition: used, Cutting length 3000mm Cutting height 160mm Advance speed by electronic variator Guide with programming Bwjdpezbxxmefx Amfow Motor 15kW 400V

Condition: used, Cutting length 400cm Width 600mm Retractable blade Bwodpfx Amozbxwvofjw Electrical guide Digital display 400V