Condition: ready for operation (used), Model: KAPRE 2500 Dkjlqzjma Ayrjknajl Machine no: 463 Edge press for solid wood stripes Heat in the plate Max width of workpiece: 50 mm Length: 2500 mm Stock no: 2001658

Condition: used, Year of construction: 2022, Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feed min: 12 m/min Feedrate max: 18 m/min Continuously variable feed: Yes Glue system granulate: glue pot above feeding chain Quick-change glue pot: Yes SCM Glue system SGP Smart Glue Pot: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: pneumatic Type: left-side machine Infeed barrier: Yes Dkjlqsv Exkyozknael Control: SCM STARTOUCH Conformity marking: CE mark Weight: 1.797 kg

Condition: good (used), Code: 0115 Brand: MASTERWOOD Model: EPM 90 Dkslqzkswid Nujnajl Automatic louver doors slotting machine Technical data: Simultaneous slot execution on two opposite doors stiles Spindle diameter mm 10 Drill speed 12000 rpm Slot inclination from 90° to 0°. Drill Motor Hp 1.5 Working pressure 6 bar Overall dimensions: mm 1300 x 1000 x 1300 h Weight kg 525 Overall dimensions for transport: machine mm 1300 x 1000 x 1300 h - kg 525 + iron bar mm 3000 x 100 x 200 h - kg 40

Condition: new, Year of construction: 2023, sliding carriage length: 3200 mm cutting width with rip fence: 1270 mm Max. cross cut width left from saw blade: 3200 mm Max. cutting height 90°: 140 mm Max. cutting height 45°: 99 mm scoring unit: yes height adjustment: motorized tilt adjustment: motorized rip fence adjustment: motorized display saw blade tilt: digital display saw blade height: digital display rip fence: digital display crosscut: scala saw blade diameter: 400 mm saw blade speed: 3000 - 4000 - 5000 U/min motor power: 7,0 kW motor brake: yes / automatically suction connection: 80 mm / 120 mm machine length: 3600 mm machine width: 1900 mm Dsljl D Rxxoqzknaekl weight: 1600 kg

Condition: ready for operation (used), Year of construction: 1972, Brand: Schmid Model: HSM Machine no: 64221 Year of manufacture: 1972 Tech info: Working width: 2700 mm Dkelqjm Udm Tjzknaol Length of sanding belts: 8000 mm Wheel diameter: 280 mm 2 sanding belts Motor: 11 kW, 50 Hz, 380 V, 3-phase Stock no: 2001583BXA

Condition: new, Year of construction: 2024, working width: 950 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically read out height: digital electronic control: Fox 500 KTR aggregates: 1 Dkjlqzsknyhloknael 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad dust brush: no motor power: 7,5 kW suction connection: 140 mm machine length: 1388 mm machine width: 1545 mm machine height: 1668 mm weight: 660 kg

Year of construction: 2012, Condition: ready for operation (used), Machine no: 483 Year of manufacture: 2012 Technical data Belt length: 3900 mm Belt width: 1350 mm Total width: 1900 mm Max weight on belt: 400 kg Dolqev Rpxfozknajkl Motor: 0.37 kW, 50 Hz, 380 V, 3-phase Stock number: 2002452BXA

Condition: new, Year of construction: 2024, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm plastic edges: 0,4 - 3 mm solid wood edges: 0,5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum length of workpiece: 120 mm Min. work piece width: 110 mm Anti-adhesive spraying unit: yes Edge preheating device: yes / with ceramic infrared lamp Bonding unit: granulat / Glue container quick-change kit Jack knife: yes Flush trimming unit: yes Corner copy unit: yes Flush radius milling unit: yes Radius scraper unit: yes Area scraper unit: yes Buffing unit: yes Cleaning spray unit: yes motor power: 5 kW machine length: 3774mm machine width: 1546 mm machine height: 1337mm weight: 842 kg Dkolqol D Rx Uszknajl

Condition: not inspected (used), Year of construction: 1976, machine/vehicle number: 1299, Brand: Weeke Model: PE 75 Year of manufacture: 1976 Motor: 7.5 kW, 50 Hz, 380V, 3-phase Dslju Nwzcjqzknaskl Stock number: 10316

Condition: new, Year of construction: 2023, working width: 1100 mm min. workpiece height: 4 mm Dslqzkneirmg Uoaekl max. workpiece height: 170 mm height adjustment: electrically workpiece thickness display: digital aggregates: 2 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller Link grinding shoe: elastic, sector distance 56 Electronic control: FOX 500 KTR dust brush: no motor power: 15 kW suction connection: 2 x 140 mm machine length: 1650 mm machine width: 1820 mm machine height: 1960 mm weight: 1170 kg

Condition: excellent (used), Year of construction: 2011, BÜRKLE PAINT LINE Model year: 2011 Stock no.: 2002451BXM Consisting of: Disc conveyor 900 Roller coating machine e.a. sy-Coater RCLD 1300 Distribution/scraping brush machine VBM 1300 Cleaning machine RMB 1300 Disc conveyor 900 Central cabinet, Control panel with touch screen Technical data: Dkolqzkov I Ur Ssnasl Software Easy line, touch screen TP177 Micro Working width = 900/1300 mm, working side right Feed speed 5–25 m/min Distance between machines approx. 25 mm Power: 400 volts, 50 hz, 3 phases, rated power 10kw, rated current 23 AMP, fuse 35 AMP Electrical cabinet 1600x500x2200mm Operating side right Pneumatics Air pressure 6 bar P1 | G 1/4 | 50 NL/min P2 | G 1/4 | 10 NL/min Extraction per connection point At air speed approx. 24 m/sec. 140 mm | 1100 m³/h Roller application machine Bürkle RCLD09M Rubber application roller above/below Chrome-plated dosing roller above/below Working width 1300mm Workpiece length min. 400mm Workpiece height 3-80mm Brushing machine VBM For:Scraping/brushing/polishing of liquid wood stains, (solvent or water-based stain) or for polishing UV waxes Working width Workpiece length min. 350mm Workpiece height 110mm Cleaning machine RMB For cleaning brushes 1 or 2 with cleaning agent (water or solvent) and drying them.

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation Dkslqzknsv Hn N Ujasl - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Condition: ready for operation (used), Year of construction: 1963, Brand: Gustav Josting Model: PFS 2100 Year of manufacture: 1963 Technology data: Cutting length: 2100 mm Extra knife included Transport dimensions: Dslqzjmb U A Ijknaokl 315x150x160 cm Weight: approx. 2000 kg Stock no: 2001659BXM

Year of construction: 1995, Condition: ready for operation (used), machine/vehicle number: 585, Brand: Hebrock Model: AKV 1000 V Machine no: 585 Year of manufacture: 1995 Tech. data: Edgeband thickness max: 3 mm Edgeband height max: 50 mm Max feed speed: 7.5 m/min With cutting knife Length of work table: 2200 mm Motor: 7 kW, 50 Hz, 230/400V, 3-phase Size for transport: Length: 220 cm Width: 115 cm Dkolqzknjib H Sljael Height: 150 cm Stock no: 2001164BXM

Year of construction: 2008, Condition: good (used), Model:Easy 2000D Serie n0:08216/02 År:2008 Spraying automat Cefla model D for applying paint to boards and other flat workpieces. The machine with dry filter has 2 holders for spray guns. "Back spray" also enables the application of color on edges. The endless band allows for leftover color to be recycled. The main parts of the machine: Equipment for air ventilation Air cleaning system System for supply and distribution of paint Drive systems for guns Endless conveyor belt Electronic control system Easy sprayer provides: High quality of painted objects, paint that does not hit the workpiece is recycled High production speed High utilization rate of color Techn info Easy 2000/D Control system ED-EASY2000 w/d Max work width including the edges 1300mm Max workpice thickness 70mm Air flow inlet ventilator/fan10000m3/h, 3 kw Air flow outlet ventilator/fan 2000m3/h, motor 7,5kw Feeding carpet speed 1,6-10,6m/min Airpressure holder endless belt  3bar Airpressure consumption 50Nl/min Airpressure feeding pump 6 bar Dolepz H Tdeqzknajkl Airpressure spray guns 1-4bar Holder spraygun Motor for operation of spray guns 2 kw Speed spray gun 120m/min Power:400 volt, 50 Hz, 3 phase, totalt17,1 kw, 40 A Maximun engine power 7,5 kw, 15,6 A Totalt17,1 kw Dimension:4840x3708x2900mm (lxwxh) Stock no:2001807BXM Note:In reservation for wrong technical info presented

Condition: ready for operation (used), Year of construction: 2001, CNC twin table ERGON CNC Maskin SCM Type:Ergon Serie no:AA1/012348 Year:2001 CNC machine SCM ERGON Program NUM PC, and CAD ALIPA CAM 2 work tables simultaneoulsy or single work 2 tool magazin/too lchange each 12 holders 2 electro spindles each 11 kw, 18000rpm who can work in pair (DUOSET) independence Z axe stroke Tool holder HSK-63 1 drillbox 18 spindles Dkelqen Hx Tlezknasl Toolchange magazin 2x12 places Angular head Manual/instruction, pneumatic, electric diagram in severaL languages on CD Technical info: Control, program NUM-PC, CAD Alpha CAM Axis stroke X-Y-Z 4500-1740x-300mm Work tables 2 pcs each 2160x1520mm electyro spindles/routers DUOSET 2x11kw, 18000rpmwho can work in pair Vertical stroke of 2 independent Z axis Syncron electronic floating head 2 carousel toolholders for change each 12 pcs HSK 63 cone Vector axe Vacuumpump 90m3/h F18-drillbox 18 spindles Power 400 volt, 50 Hz, 3 phase Dimension set up approx:7460x5500mm X-x Weight 7000 kg Stock no:2001650BXA Price: 200000 SEK

Year of construction: 1995, Condition: good (used), UV roller coater Bürkle Brand: Bürkle Model: SAL 1300 Machine no: 7251 Year of manufacture: 1995 Tech. data: Working width: 1300 mm Workpiece thickness: 100 mm Working height: 870 mm Feed speed: 6-30 m / min Chromium-plated doctor roller: Diameter 174 mm Rubber covered applying roller: Diameter 238 mm Working pressure max: 6 bar Motor: 2,2 kW, 400V, 50 Hz, 3-phase Size for transport: 2850x900x2200 mm Dkjlog Hr A Ioqzknaol Weight: 1450kg Stock No: 2000360

Condition: good (used), Year of construction: 2000, Functionality: fully functional, Brand: Holzma Type: Optimat HPP 82/43 Machine no: 0-240-06-4258 Year 2000 Tech. info: Saw length 4300mm Saw blade overhang 95mm Motor (main)13.5kw Scoring motor 2.2kw Saw carriage feed 5-125m/min 4 infeeder tables with air cushions Power 19.5kw, 400volt, 3 phase 35 AMP Dksljtvmrfoqzknajl Size for transport: A total of 4 parcels. 1, saw 6.5 x 1.2 h 2.0. 2, Beams and grips 5.1x1.0h1.0. 3, Table in front 2.4x0.8 h 2.0. 4, 1 pallet sheets 1.2 x 0.8 H 1.6 Stock no: 2002183BXM

Condition: ready for operation (used), In-feeder TP Type: TP Compact planer/moulder feeder for various length up to full length, frequency-controlled gear motors. Buffer chains, one of which is adjustable for current subject length. Dkelqsvxuy Rjzknaol Techn info: Feed speed 5-50m/min Buffer chains 2100mm Shortest pcs length 400mm 400 volts, 50 Hz, 3 phase Stock no: 2002173BXA Note: some images in the ad may be on another equivalent machine

Condition: ready for operation (used), Brand: Bila Lifting system tawi Machine no: 250315-1 Stock number: 2002444BXM Dkelqjv Hyfhozknajl

Condition: good (used), In-feeder TP Type: TP Compact planer/moulder feeder for various length up to full length, frequency-controlled gear motors. Buffer chains, one of which is adjustable for current subject length. Techn info: Feed speed 5-50m/min Buffer chains 2100mm Shortest pcs length 400mm 400 volts, 50 Hz, 3 phase Stock no: 2002144BXA Note: Dkolqzkjtt N Dpsnaol some images in the ad may be on another equivalent machine

Condition: ready for operation (used), Brand: Randek Type: SP700 Machines and equipment included: Powered roller conveyor Size: 4650x1460 mm Hydraulic lifting table Size: 3470x1470 mm Feed roller conveyor to the saw Size: 4000x400 mm Cutting saw Randek Dkelqzertp Hteknajl Size: 1000x1700x2100 mm Out-feeder roller conveyor with length stops Size: 5600x400 mm Hydraulic press Size: 1350x1500 mm Jacking cutter Randek Size: 1000x1500 mm Length of the entire saw line approx.: 17.5 meters P.s The cut-off saw's program and motor control of the saw blade do not work. Stock no: 2002038BXM

Condition: ready for operation (used), Year of construction: 1987, Märke: Bacci Model: MOA Machine no: 1844 Year of manufacture: 1987 Dkolqzkov T Tp Tenasl Stock no: 2002478

Condition: ready for operation (used), Brand: SCM Model: P-230-S Feeder: Mahros Type: Ben200 Dkolotpm S Eoqzknaol 8 spindle planer SCM with feeder Mahros, safety curtain and spare parts. Tech. info: Capacity: Max working width 230mm Max working height 120mm Spindles in order: below (4 kW, 5.5 hp), right (5.5 kW, 7.5 hp), left (7.5 kW, 10 hp), right (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), left (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), below (7.5 kW, 10 hp) Spindle diameter 40mm Max. diameter of tools that can be mounted under the work table: 190 mm Variable feed speed 10-50m/min Cardan driven with pneumatic pressure on feed wheel Feed motor power: 4.4/5.5 kW Motor power for raising/lowering: 0.55 kW (0.75 hp) Brake in the engines Elecricity: 400 volts, 3 phase, 50 Hz Machine dimensions: Length: 5900 mm Width: 1800 mm Height: 1600 mm Size for transport: 590x210x160 cm Stock no: 2002064BXA

Year of construction: 1996, Condition: ready for operation (used), CNC Model:CMS Type:PF102 NC102-6 Serial no:PC1590 Year of manufacture:1996 Spare parts and tools included Dkslqzkned D D Dcoajl 9 cutters included Tec. info: Double table 1500x1500mm Can work alternately or together 2 vacuum pumps 6 moulding motors Stock no: 103605BXA