Condition: ready for operation (used), functionality: fully functional, -Pink bench drill, model: Bravo. Njdpfx Aiszv T Hteyoda

Condition: used, Year of construction: 1982, spindle diameter 150 mm x-travel 3.000 mm y-travel 2.000 mm spindle stroke 700 mm ram: horizontal adjustment 700 mm dimension of the ram 340 x 340 mm spindle taper ISO 50 spindle turning speed range 2 - 2.500 U/min feed 5000 mm/min rapid traverse 10 m/min table surface area 2.500 x 2.000 mm table load capacity 25.000 KG B - axis 360 ° Ndodpeyw Th Aofx Aiyea total power requirement 100 kW weight of the machine ca. 57 t dimensions of the machine ca. 8,40 x 6,80 x 5,90 m Retrofit in 2004

Condition: good (used), Machine is still under power and running Nodpfx Aeyw Uayoiysda

Condition: excellent (used), Year of construction: 1974, travel distance X-axis: 4,600 mm, travel distance Y-axis: 3,000 mm, feed length W-axis: 2,000 mm, spindle diameter: 160 mm, table load: 25,000 kg, CNC boring and milling machine – Scharmann Manufacturer: Scharmann Ndodpfx Aezvw Ihjiyja Model: WFT 160 (early 1970s) Control system: Bosch CC300 Work table: 2000 x 2500 mm Longitudinal travel of the table: 4600 mm Transverse travel of the table: 2000 mm Vertical travel of the spindle: 3000 mm Maximum table load: 25 tons

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm Nsdpfsxlqxfox Aiyjda - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Year of construction: 2001, condition: used, Travel X/Y/Z/W: 1500mm/1250mm/1000mm/550mm, B-axis: 360°, boring spindle diameter: 110mm, spindle speed: 4000rpm, gear ranges: 2, rapid traverse: 15m/min, tool taper: SK50, table dimensions X/Y: 1000mm/1250mm, T-slot width: 22mm, height of clamping surface above floor: 1050mm, max. table load: 6000kg, control: Heidenhain TNC 426. With electronic handwheel. Weight: approx. 13500kg. An on-site inspection is possible. Ndedszwfqyopfx Aiyea

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm Nodowdta Espfx Aiysda z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: excellent (used), Caser radial drill mod. F50-1250 complete with cube Ndedpfxsv Hngmo Aiyoa

Condition: used, Year of construction: 1975, drilling capacity steel/cast iron 23,30 mm throat 300 mm Nsdpfjymp Snjx Aiyjda bore stroke 140 mm spindle taper MT MK 3 spindle turning speed range 208- 2000 U/min table travel 400 mm weight of the machine ca. 275 kg table-size 415 x 300 mm distance work spindle /surface of the table 450 mm voltage 400 V connected load 0,9/1,4 kW

Condition: used, Year of construction: 2010, table length 2000 mm table width 1800 mm table load 12,5 t longitudinal adjustment 1250 mm longitudinal feeds of table 0,63-2000 mm/min table height 920 mm groove width 36 mm Control moviaxes SEW total power requirement 10 kW Njdpfx Asztrvnsiyeda weight of the machine ca. 7,5 t dimensions of the machine ca. 3,7 x 2,1 x 1 m

Condition: good (used), *FOR SALE: Cincinnati Milacron PTC 40 Column Drill – 1982* *Price:* €2,200 – Negotiable *Location:* Les Ponts-de-Cé, 49130, Pays de la Loire *Description:* Industrial column drill *CINCINNATI MILACRON PTC 40*, manufactured in 1982. French made. Nodpfx Aiezvgr Ajyjda Very robust machine for drilling and tapping in mechanical and sheet metal workshops. Column with cross table mounted on slides. Remote control + foot pedal. Complete and fully operational machine. *Specifications:* - *Make / Model*: CINCINNATI MILACRON PTC 40 380V - *Year*: 1982 - Serial No. 45117 - *Type*: Column drill on a base - *Table*: Cross table mounted on slides - *Feed*: Spindle descent via handwheel + lever - *Equipment*: Remote electrical cabinet, Foot pedal, Vises - *Mounting*: On a pallet for removal

Condition: good (used), Year of construction: 2007, *Description:* Industrial column drill press *CINCINNATI CA NC320V*, year 2007. Made in France. High-end machine for precision drilling in a mechanical workshop. Column-mounted spindle with mechanical speed variation in 2 ranges. Cross table + vise included. Complete machine, available for inspection. *Specifications:* Ndsdpfxozvgn Rj Aiyea - *Make / Model*: CINCINNATI CA NC 320V 380 - *Year*: 2007 - Serial number 320838 - *Speeds*: 2-range variable speed: 80-625 rpm and 385-3000 rpm - *Spindle*: CM3 or CM4 taper, to be confirmed - *Table*: Cross table + vise, as shown in the photo - *Column*: Column with rack and pinion for motorized up/down movement - *Equipment*: Emergency stop, speed chart *Condition*: Very good condition. Recent and robust machine. On a pallet for removal. Testing possible on site. Removal by carrier.

Condition: good (used), Hello, For sale: RF-50/1250 radial drilling machine. Nedpfxoxykctj Aiyjda The machine is in working condition, currently in continuous operation, and can be inspected and tested on site. The price listed in the advertisement is net and VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Condition: good (used), Year of construction: 2014, Offer 26252 Technical data: - Drilling capacity in full steel ST 60: 22 mm - Drilling capacity GG 25: 32 mm - Thread cutting ST 60: M 20 - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max: 420 / 1320 mm - Swivel angle: 320° - Table size: 1200 x 600 mm - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm - Hydraulic column and arm clamping Ndedpozwftzjfx Aiysa - T-slots, vertical, on the left side of the machine - Coolant system - Drive: 400 V / 1.1 / 1.6 kW - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, The machine is in very good technical condition, operational, and accurate. 4 axes. Includes accessories! Main technical parameters: Spindle diameter: 100 mm Spindle taper: ISO 50 Spindle speed: 16 – 1250 rpm Table clamping area: 1000 × 1120 mm Table transverse travel (X-axis): 1250 mm Spindle head vertical travel (Y-axis): 900 mm Table longitudinal travel / stroke (Z / W-axis): 1000 mm Maximum table load: 3000 kg Main electric motor power: 20 kW Machine dimensions (L × W × H): 6130 × 3600 × 2750 mm Machine weight: 13,400 kg Njdpezuy Smefx Aiyjda

Condition: used, Empty weight: 4.200 kg - Documentation available: Yes Nodswnifrspfx Aiysda - CE certificate present: No - Control: Conventional - Motor power: 2.0kW - Transport weight [kg]: 4200kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts Nedpfjzrr Uuox Aiyoda - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Ndedezl Rqhopfx Aiyoa Technical data Manufacturer: SORALUCE Model: ALF 80 A Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Equipment / Accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.

Condition: used, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 45 - 1370 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: Nodszwg Rujpfx Aiyeda - Feed - Thread cutting device

Condition: used, Year of construction: 1977, serial number 2934 weight 709 kg Ndedpeztfytjfx Aiyja feed ja m/min taper MK 3

Condition: used, Year of construction: 1986, taper MK 1 Ndedpfsztfymjx Aiyoa weight of the machine ca. 69 kg

Condition: used, 1 piece of drill chuck, ALBRECHT, clamping range up to 10 mm 2 pieces of Morse taper with driving lugs, MK 1 2 pieces of collet chuck with cap nut, ER 11, length 70 mm 1 piece of collet chuck with cap nut, ER 11, length 40 mm 1 piece of milling chuck, shank 20 mm Ndodpfx Aiszvyphsysa

Condition: used, 1 piece drill chuck, ALBRECHT, clamping range up to 10 mm 1 piece drill chuck, RÖHM, clamping range from 3 - 13 mm. For quick-change system SF 32: 1 piece collet chuck with locknut, ER 32 Ndedpfx Aijzvyn Reyea 2 pieces collet chuck with locknut, ER 25 1 piece milling arbor, shank 32 mm

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 32 mm Nedpoztf Aujfx Aiyoda arm length ca. 920 mm

Condition: used, Year of construction: 1988, taper MK 1 Nsdpfxjztfwfj Aiysda weight of the machine ca. 140 KG