Condition: new, bore capacity in steel (diameter) 45 mm quill stroke 125 mm 560 mm 230 mm table surface area 800 x 240 mm Csln Tjupxrnsigbegt spindle turning speed range 75 - 3200 U/min max. milling cutter diameter 80 mm spindle taper ISO 30 max. distance between table and spindle-nose 460 mm throat 230 mm connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 580 Kg dimensions of the machine ca. 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box.

Condition: excellent (used), Flott table drilling machine Drilling capacity 22 mm Tool holder MK 2 Csln Tevuhr Esigbsgt Drill chuck

Condition: good (used), Year of construction: 2001, Used Alzmetall drilling machine Type: Alzstar 40 s Capacity: up to 40 mm Year of manufacture: 2001 Csln Tiowc Nlbogbegt

Condition: good (used), Year of construction: 1971, Drilling capacity in steel St 60: 55 mm Drilling capacity in cast iron Gg 22: 70 mm Spindle mount MK 5 Celnjwcm D Uo Tigbegt Thrust 1600 mm small Distance from outer column edge: 350 mm Vertical movement of the boom: 860 mm Max. distance between spindle and table top: 1560 mm Spindle stroke: 400 mm Drill spindle  80 mm Spindle speeds: 22 – 1600 rpm Feed range: 0.05 – 2.5 mm/rev Column diameter: 400 mm Motor power: 4 / 5.5 kW Table clamping area: 1750 x 1000 mm Dimensions (L x W x H) (with motor): 2500 x 1130 x 3150 mm Loading dimensions (L x W x H) (without motor): 2500 x 1130 x 2850 mm Weight: 5600 kg Accessories / Special features: • Electromechanical central clamping • Electrohydraulic preselection of speeds and Feeds • Right-left rotation • Drilling depth limit switch • Cube table • Multi-disk clutch for thread cutting • Emergency stop switch • Coolant system Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), I SELL FEIN PS 50 MAGNETIC DRILL. IN VERY GOOD CONDITION. Cgsln Tioulc Tuegbet

Condition: used, core drilling diameter max. 400 mm bore depth 3500 mm swing diameter 850 mm Control Siemens 840D full boring Ø 20 - 200 mm core boring Ø - 400 mm drilling out Ø - 400 mm mm method of boring BTA motor output at 1500-5000 rpm 100 kW speed range step 1 10 - 499 U/min speed range step 2 500 - 2000 U/min spindle bore Ø 120 mm feed speeds 0 - 7000 mm/min rapid speed 7000 mm/min total power requirement 200 kW weight of the machine ca. 16 t dimensions of the machine ca. 14 x 8,35 x 2,2 m Equipment / Accessories: - set-up station with loading gantry for parallel set-up during drilling process - drill pipes - 2 circular roundabouts for vibration dampers (large/small) - half-shell clamping device (small/medium/large) - cone discs - radial clamping discs - chip conveyor (2004) - oil cooling and filtering system with band filter - chip shredder and centrifuge (2017) - oil tank 20000 l (emptied) - cooling lubricant pumps - 3 screw spindle pumps - stop for counterholder - hydraulic cylinder Ø 25.4 x 120 mm stroke - counterholder - hydraulic cylinder Ø 82.6 x 95 stroke Cgslowcrwaen Tigbet - guide slide - motor output 55 Nm at 2000 rpm - contact force max. 40 KN - longitudinal travel max. 500 mm in front of fixed headstock - clamping diameter for BTA drilling oil supply Ø 490 mm - feed speed 0-7000 mm/min - rapid speed 7000 mm/min - shell-type tailstock - motor output 18 Nm at 2000 rpm - feed speed 0-7000 mm/min - rapid speed 7000 mm/min - toothed belt 40T10/1390 - various spare parts - documentation

Condition: good (used), Functionality: fully functional, machine/vehicle number: 19197, spindle speed (max.): 3,550 rpm, spindle speed (min.): 450 rpm, total height: 1,295 mm, overall weight: 160 kg, total length: 620 mm, total width: 480 mm, spindle mount: MK 2, drilling stroke: 100 mm, Solid bench drilling machine for individual or series production in good condition (used). Cgolnswgfkus Tigbet

Condition: new, The machine does not include a stand. The BF3 Deluxe stand is available separately under item no. 56-1017. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle mount: MT 4 Quill stroke: 120 mm Cgsljfkz Tion Tigbet Quill feed: (3) 0.10 / 0.18 / 0.26 mm/rev Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head tiltable: -60° to +60° Spindle / table distance: 60 – 485 mm Milling head height adjustment: 425 mm T-slot size: 14 mm Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor power consumption S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 770 x 1500 Weight approx.: 308 kg * without base frame Features: - Powerful 2-speed motor, speed range 75 - 3200 rpm - Milling head pivots to both sides for angle drilling, milling chamfers, etc. - High safety thanks to height-adjustable chuck guard with microswitch - Standard with automatic spindle sleeve feed and thread cutting device - Dovetail guide for x-, y-, and z-axes, adjustable via V-ledges - Quick and easy speed changes using the gear selector switch - Standard with digital display for spindle sleeve feed - High stability thanks to the dovetail guide of the gear head - Spindle adjustment via handle Fine adjustment via handwheel - Stable and vibration-free cast iron construction Scope of delivery: - 3-axis digital readout i200 with LCD display - Keyless drill chuck 3 – 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Drawbar spindle M 16 - Reducing sleeve MT 4/3 - Combined shell mill arbor MT 4 / 27 mm - Height-adjustable protective cover - Automatic sleeve feed - LED machine light - Digital sleeve stroke display - Thread cutting device - Lamellar protective cover - Longitudinal measuring scale - Operating tool

Condition: like new (used), Year of construction: 2021, Like-new drill press from Arodrill (Denmark) Capacity up to: 25 mm Mounting: MC 3 RPM: 220 - 1680 Year of manufacture: 2021 Colnewc Nhis Tigbsgt

Condition: ready for operation (used), Year of construction: 1975, Radial Drilling Machine Brand: CSEPEL Type: RF75/1750 Year: 1975 / Modernized in 2013 Specifications: Maximum drilling diameter: 75 mm (steel) Cgolnowhfhvo Tigbet Maximum thread: M60 Arm length: 1750 mm Vertical arm travel: 950 mm Arm rotation on the column: 0° to 180° Min./Max. distance: Between spindle and base: 370 / 1,700 mm Spindle stroke: 380 mm Morse taper No. 6 Spindle speeds: 19 – 1,900 rpm Spindle feeds (16 ranges): 0.047 - 2 mm/rev Useful base area: 1,100 x 2,050 mm Machine height: 3,450 mm Machine weight: 6,000 kg Equipped with: Programmable RADIAL 2-axis display (equidistant drilling on a diameter) Heidenhain probe Reduction gear for arm rotation with angle encoder Cube: 1,000 x 800 x 600 mm

Condition: good (used), Distance from table to nose: Max (mm) 740 Min (mm) 290 Celn Tigoummkmjbjgt Distance from spindle axis to vertical face of upright: 400mm Spindle motor power: 4 KW Spindle : Stroke 325mm Diameter: 70mm Cone N°: CM4 Dimensions LxWxH : 1700 x 1500 x 250mm Net weight: 1500kg

Condition: used, SERRMAC SERR-MAC Type TMF 32 3-Station In-Line Drilling and Tapping Machine Manufacturer No. 985080, Year of Manufacture 1999 Drilling Capacity 32 mm Table Size 2000 x 330 mm Thrust 270 mm Drill Head Spacing 1000 / 500 mm Drill Head Left: MDR 32 Spindle Mount MT 4 Quill Stroke 60 mm Spindle Speed 64 - 1720 rpm 12 speeds Motor power 2.2 kW - Thread cutting device via guide cartridge, 1 guide cartridge with 1 mm pitch - Spindle speed with 12 gear steps - Drill head height adjustment via rack and hand crank Center drill head: MK 3 spindle mount Quill stroke 130 mm Spindle speed 100 - 1650 rpm, continuously variable Motor power 0.92 / 1.5 kW - Spindle speed with 2 motor speeds and continuously variable via variator gear - Automatic feed 0.05 / 0.1 / 0.2 mm/rev - Drill head height adjustment via rack and hand crank - 1 RÖHM keyless chuck Ø 0.5 to 13 mm Right drill head: MK 3 spindle mount Quill stroke 130 mm Spindle speed 100 - 1650 rpm Continuously variable Motor power 0.92 / 1.5 kW - Spindle speed via 2 motor speeds and continuously variable via variator gear - Automatic feed 0.05 / 0.1 / 0.2 mm/rev - Thread cutting device - Drill head height adjustment via rack and hand crank - 1 RÖHM keyless chuck Ø up to 16 mm Power supply 400 volts, 50 Hz Csln Tigewb Hxpobjgt - Coolant system for all 3 drilling stations Space requirement L x W x H 2320 x 1100 x 2300 / 2930 mm Weight 1500 kg Very good condition

Condition: used, Year of construction: 1995, bore capacity in steel (diameter) 60 mm throat 400 mm bore stroke 240 mm 5 speeds 63 - 1250 U/min table-size 840 x 670 mm total power requirement 4 / 5,5 kW weight 1450 kg dimensions 1000 x 1400 x 2450 mm Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: Cgsln Tigjwcg H Asbet - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: excellent (used), Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 500 m/min, table length: 550 mm, table width: 320 mm, table load: 400 kg, spindle mount: MK 2, total height: 1,650 mm, drill spindle length: 130 mm, total length: 1,200 mm, total width: 1,150 mm, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 Unique Piece Celn Tisv S Exwegbjgt Jig boring machine/jig boring machine in excellent, exceptional condition, second-hand (last owner 41 years). Electrical system partially overhauled and modernized. Extensive tool package in mint condition, including tool cabinet optional for an additional charge. Photos upon request. The machine was last located in a prototype workshop of a large company and has not been used for many years. The jig boring machine features the very rare option of a motorized table drive on the X and Y axes and a potentiometer. This eliminates the need for laborious movement of individual coordinates over long distances using hand cranks. Furthermore, it features the rare thermal stabilization and expansion compensation. Two heaters are provided for this purpose, which can and must be switched on separately before starting work and to maintain high accuracy and pitch. This explains the factory-set high positioning accuracy of 0.002 mm with a resolution of 0.001 mm. What's unique is that the Hauser features two Heidenhain digital readouts with a total of four glass scales with 1 μm resolution, including the spindle feed. This is a huge advantage for precise drilling and facing at depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, this is currently a unique piece on the market and certainly not available again. Experts at these machines, which are primarily used in the watchmaking industry, precision engineering, materials testing, and the optical industry, know the value of these masterpieces of mechanical engineering. They are also ideally suited for testing laboratories, technical universities, materials engineering, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are, of course, available in their original form! Technical specifications: Table length = 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle mount MT 2, drill spindle stroke (Z-axis) = 130 mm Distance from table to spindle = 590 mm, spindle speed continuously adjustable from 60 rpm to 3000 rpm Feed rates: Drill spindle slide: 2 steps from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 volts, spindle motor 0.80 HP Machine dimensions: Length = 1200 mm, width = 1150 mm, height = 1650 mm Machine weight approx. 1500 kg, weight of the tool cabinet including contents approx. 150 kg. Electrical system partially overhauled and modernized where necessary! Please only serious inquiries with full name and address, thank you!

Condition: used, Year of construction: 2008, Used CMA drilling center Cgjln Tiowc Ndwsgbot Type: TRD 40 CN 9000 Table length: 9000 mm Maximum capacity: 40 mm Automatic tool changer Year of manufacture: 2008

Condition: used, Year of construction: 2008, machine/vehicle number: 0702-240017, Cross transfer tables as a chain drag system for the cross transport of sectional steel in steel construction and steel trade. These sturdy cross transfer tables were used on a Kaltenbach bandsaw line and are in very good condition. Cslner Rddwj Tigbogt 5 pieces of overhauled cross drags as chain drag system with antitrailing bar for discharge side, incl. 1 x motor and 4 x shafts, length 3300 mm, height 600 mm,

Condition: excellent (used), GSP M 743 mortising machine Stroke (mm): X450 Y500 Slide travel (mm): 300 Max. table tool distance (mm): 450 Gooseneck (mm) : 590 Slot width 25 30 mn Coloulfuzjn Tigbegt Table diameter (mm): 700 Feed speed (mm/mm): 0.1-2.5mm/Cp Main motor power (HP): 6 Machine equipped with : Automatic feeds/Slide tilting Dimensions WxDxH (mm) : 2300x1700x2600 Machine weight (T) : 3.5 Overall dimensions 2500x 2200 height 2400

Condition: excellent (used), Year of construction: 2006, We are selling a reliable ALZRAPID 32 in good condition. The machine is ready for demonstration under power and available at short notice. Please refer to the following description for technical specifications: Technical Specifications: Spindle speeds: 102/152/204/250/304/408/500/608/816/1000/1216/2000 Short spindle: MT4 Drilling capacity steel E 335 (St 60) *1): 32 mm Drilling capacity cast iron EN-GJL-200 (GG 20): 32 mm Motor: 1500/3000 rpm Accessories: Celnsvt U Tgo Tigbjgt - Digital display with glass scales - Thread cutting - R 0 L adjustment - Adjustable feet - Documentation and operating instructions

Condition: new, Spindle: MK 3 Continuous drilling capacity: 25 mm normal drilling capacity: 30 mm Tapping capacity: M 20 drilling depth: 125 mm throat depth: 260 mm Distance spindle/table: 90 to 840 mm table surface: 500 x 365 mm column diameter: 110 mm total height: 1.855 mm Cgsln Tigeb Eli Hjbet weight: 250 kg motor pole-changing: 0,8/1,5 kW Spindle speed infinitely variable range A: 80 - 1.440 min-1 range B: 180 - 3.200 min-1 Digital display for speed as standard.

Condition: good (used), comes with a blue metal cabinet containing some spare parts Cgelsv Rw R Non Tigbst

Condition: as good as new (ex-display), Year of construction: 2024, Optimum OPTIdrill RD 6 Precise, solid radial drilling machines of top quality. Ideal for versatile use in single-part and series production. • Versatile application range, such as drilling, reaming, and threading • Electrically braked motor • 24V DC electrical system and 2-channel safety chain according to DIN EN 12717 • Heavy, solid, high-quality cast iron • Wide reach thanks to horizontally adjustable machine head • Clearly arranged control panel • Smooth-running swivel and travel axes • Elaborately machined column swivel with optimized clamping for maximum stability and minimal clamping offset • Robust, torsion-resistant boom construction • Boom height adjustment via powerful motor drive and lifting spindle • Drill head gear running in an oil bath • Boom guideways hardened and precision-ground • Chrome-nickel steel gears, hardened and precision-ground, ensuring quiet and smooth operation • Drill head and column can be clamped together or separately or loosened • Right-left rotation • Solid, precise drilling table, generously dimensioned • Hardened and ground clamping table with parallel T-slots • Machine light • Overload protection • Thick-walled cast iron column ensures smooth operation and stability • LED lamp • Coolant system with coolant tank in the machine base RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter 320 mm Length approx. 2670 mm Width/Depth approx. 1120 mm Height approx. 2760 mm Weight approx. 3200 kg Extension arm Rotation angle 180° Drilling capacity Drilling capacity steel (S235JR) 50 mm Continuous drilling capacity steel (S235JR) 45 mm Drilling table T-slot size 14 mm T-slots Number: 4 T-slot spacing: 180 mm Maximum distance between spindle and drilling table: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Number of T-slots on the clamping table: 3 Clamping table T-slot spacing: 150 mm Min. distance between spindle and clamping table: 0 mm Max. distance between spindle and clamping table: 910 mm Min. distance between spindle and drilling table: 465 mm Speed range: Speed range: 44 – 1023 rpm Number of speed ranges: 12 Electrical data: Total power consumption: 6.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine base: Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Spindle motor drive power: 4 kW Drive power Cantilever arm lifting motor 1.5 kW Coolant pump power of drive motor 90 W Hydraulic clamp drive 0.75 kW Spindle Quill stroke 270 mm Spindle mount MT5 Quill feed speed 0.06 – 0.2 mm/rev Quill feed speeds 3 Travel path Cgeln Tigewa Tc Sjbot Drill head travel (horizontal) 1250 mm Arm stroke (vertical) 680 mm Maximum spindle-column distance 1600 mm Minimum spindle-column distance 350 mm

Condition: excellent (used), Year of construction: 1995, Fehlmann Picomax P51 DC in very clean condition Specifications: X-axis 450mm Y-axis 260mm Z-axis 120mm W-axis 450mm Speed 50-9200rpm Table size 770x320mm Take-up spindle SF32 Machine power 10kW Machine dimensions 1500x1480x2330mm Machine weight 1300kg Cjln Tsnpx Rteigbegt Accessories: Heidenhain digital Machine clamp Various milling attachments Machine books

Condition: as good as new (ex-display), Year of construction: 2013, As good as new drilling center from CMA Type BRD32CN6000 Capacity 6000 x 32 mm Cjln Tijwcghtsgbogt Table length 6000 mm Including tool changer Including 4 pneumatic clamps, various tool holders and height sensor Machine has hardly been used and is in new condition

Condition: good (used), Year of construction: 1991, UNION boring machine in very neat condition. Specifications: Spindle diameter 102mm Recording ISO 50 Drill spindle displacement (W) 710mm Drill head displacement (Y) 1250mm Longitudinal slide displacement (Z) 1475mm Cross slide displacement (X) 1600mm Table rotation 360 degrees Table dimensions 1250x1400mm Speed 8-1600rpm in 3 steps Cjlowg Ryzsn Tigbsgt Motor power 11kW Total machine power 23kW Total weight 9385kg Floor surface 8x2.2mtr Accessories: Ball screws Heidenhain digital Milling head Plan disk

Condition: used, Year of construction: 1991, Functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,450 mm, table load: 4,000 kg, spindle diameter: 110 mm, spindle speed (min.): 2,500 rpm, total height: 3,700 mm, total length: 4,500 mm, total width: 6,850 mm, table length: 1,000 mm, table width: 1,250 mm, overall weight: 17,000 kg, PBR CNC cotter mill type AF 110 CNC. Machine is fully operational and still in production Cjln Tigswg Rvisbogt