Condition: good (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,600 mm, Manufacturer: SORALUCE Type: TL-25 Control: HeidenHain TNC 430 Year of manufacture: 1998 Aiptek ATC 30 positions Automatic head 2.5 x 2.5 Gr Central lubrication Machine housing with front doors Large tool package Specifications Fedpfov Idalsx Aabepn Metric US Standard X-axis 2500 mm Y-axis 1000 mm Z-axis 1600 mm Table length 2860 mm Table width 1000 mm Table load 7500 Spindle power 25 kW Spindle speed 0 - 3000 rpm Tool holder 50 ISO/Bt/Mk X-axis feed 10000 mm/min. Y-axis feed 10000 mm/min. Z-axis feed 10000 mm/min. Milling head auto index 2.5 x 2.5° Working hours 12500 H Dimensions (estimate) Length 6000 mm Width 3500 mm Height 3500 mm Weight 15000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Digital Readout Heidenhain, infinitely variable feed, in very good condition Technical Data: >> Year of manufacture: 1978 Machine No.: 2202-10163 >> Fixed angle table >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quill - SK40, extendable >> Drawbar system S20x2 >> Weight approx. 1400 kg Fpodpfsxghtvox Aaben Accessories and Equipment: >> 3-axis digital readout from Heidenhain >> Coolant system >> Mechanical central lubrication About the machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash, and all spindles move smoothly. The machine runs quietly even at maximum speeds. On this newer FP2 model, the feed rate is infinitely adjustable on all three axes, and each axis is equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and improves precision. You are welcome to view and test the machine under power at our facility.

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table length: 3,700 mm, overall weight: 18,500 kg, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2007 Travel / Stroke Capacities: Longitudinal (X): 3,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,000 mm Table dimensions: Length: 3,700 mm Width: 850 mm T-slots: 5 x 22 H12 Reference slot: 1 x 22 H8 T-slot spacing: 140 mm Paintwork: RAL 5011 (steel blue) RAL 7035 (light grey) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 24 kW Spindle speed range: Spindle speed: 20-3,000 rpm Torque: 479 Nm Max. feed rate: X, Y, and Z axes 25,000 mm/min Mean acceleration: 2 m/s² Weight: approx. 18,500 kg HEIDENHAIN iTNC 530 HSCI Fpjdpfx Aasxgn Efjbjn Swiveling control pendant including Heidenhain iTNC 530 control (1 processor / 4 axes) with software options 1 and 2. Automatic Milling Head, Diagonal H4 Automatic indexing Soraluce “Diagonal” milling head, Type H4 / 2 planes with 2.5° x 2.5° indexing, 479 Nm, tool clamping force 18,000 N. Automatic tool changer: Automatic tool changer (random carousel) with 20 magazine positions: The automatic tool change is carried out in the vertical position of the tool spindle. Maximum tool diameter: 125 mm Maximum tool length: 250 mm Maximum tool weight: 15 kg Number of magazine positions: 20 Chip conveyor package: Three chip conveyors, two longitudinal screw conveyors and one cross hinge belt conveyor with integrated coolant tank, discharge height: 1,000 mm Coolant System 2: Coolant/lubricant system 2 with discharge via shower ring and internal coolant supply according to DIN 69871 Form AD, tank capacity 500 l + 150 l lift tank with pump, delivery rate 50 l/min, delivery pressure 5/8 bar. Increased delivery pressure of high-pressure pump from 15 bar. RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced by us following a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, all identified visible defects and faults are professionally repaired by our expert service team.

Year of construction: 2011, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 8000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 2000 x 2000 mm TRANSVERSAL TRAVEL OF THE TABLE: 1500 mm HEAD: A/B AXIS AUTOMATIC ; CONTINUOUS ; ISO 50 ; 7000 rpm; 49 kW; 1180 Nm TOOL MAGAZINE: CHAIN-TYPE ; 80 POS CONTROL UNIT: HEIDENHAIN iTNC 530 ACCESSORIES: SWARF CONVEYOR ; Fedpfx Ajwl R Ageabepn PORTABLE HANDWHEEL ; LASER TOOL SETTER NOTE: WITH ROTARY TABLE 1500X1500 mm

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Fpedpfxoxf Ur Ne Aabjn

Condition: used, Year of construction: 2001, x-travel 2000 mm y-travel 920 mm z-travel 900 mm table surface area 2200 x 750 mm table load 3 t number of T-slots 6 T - slots - width 18 mm T - slots distance 120 mm spindle taper ISO 50 DIN 69871-B spindle speed max. 3000 U/min transmission ratio 1 speeds infinitely variable range 1 60 - 3000 U/min weight of the machine ca. 21,6 t feeds longditudinal/cross/vertical 0 - 5000 mm/min rapid traverse 15000 mm/min total power requirement 38 kw weight of the machine ca. 11 t Fpsdpog E Utxjfx Aabjn Pull studs DIN69872-B | IKZ Hours: Control on: 43036 h Machine on: 41311 h Program run 13894 h The machine is already dismantled

Condition: new, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 6356, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,600 mm, MACHINE CONFIGURATION GENERAL SPECIFICATIONS TRAVERSES - Longitudinal traverse     8.000 mm - Vertical traverse     3.200 mm - Cross traverse     1.600 mm C0 Axes configuration in the machine: Longitudinal traverse X Vertical traverse Y Cross traverse Z Milling head zero position (0,0) Spindle parallel to Z REMARK: In case that the customer wants to modify this standard, option C0B must be selected before machine is launched into production. MACHINE ACCURACY Positioning A (according to ISO 230-2) ▪Longitudinal traverse 8.000 mm 0,023 mm ▪Vertical traverse 3.200 mm 0,013 mm ▪Cross traverse 1.600 mm 0,010 mm Repeatability R (according to ISO 230-2) ▪Longitudinal traverse 8.000 mm 0,018 mm ▪Vertical traverse 3.200 mm 0,010 mm ▪Cross traverse 1.600 mm 0,008 mm MEASURING SYSTEM LE_H Absolute linear scales: Manufacturer Heidenhain Axes X / Y / Z Sealing Compressed air Precision ±0,005 mm AUTOMATIC SLIDE FEEDS ▪Number of feeds as per ISO R-229 Stepless adjustable ▪Rapid Feed: Longitudinal axis 35.000 mm/min Vertical axis 35.000 mm/min Cross axis 35.000 mm/min ▪Acceleration rate (instantaneous, not maximum): Longitudinal axis 1 m/s² Vertical axis 1,5 m/s² Cross axis 2 m/s² NC17 Digital drive axis servomotors Heidenhain ▪Feed servomotors torque (M0):  Longitudinal axis (double pinion) 2 x 26,1 Nm Vertical axis 47,6 Nm Cross axis 47,6 Nm ▪Working feed force (X-Y-Z axes) 20.000 N MACHINE MEASUREMENTS ▪Approx. length (L) 13.790 mm ▪Approx. height (H) 6.640 mm ▪Approx. width (W) 3.850 mm ▪Ram section and clearance diameter 480 x 500 mm / Ø 695 mm MAIN SPINDLE AD43 Spindle motor: H Manufacturer Heidenhain Power (S1-100% / S6-60%) 43 / 49 kW T900 Maximum torque available (S1-100% / S6-60%) 900 / 1.045 Nm Type Direct Drive Fpjdpfxjxcnk Te Aabon Location Inside RAM Cooling system Coolant HEADS H94E MACHINE PREPARATION FOR FUTURE INSTALLATION OF AUTOMATIC HEAD CHANGING SYSTEM ▪Mechanical preparation for code H94D (with adapter flanges). ▪Head is fixed or changed in the machine manually (not automatically) with bolts. ▪To be acquired for full automatic head changing system: Additional heads (with its own adapter flanges). Pick-up station for heads. ▪Modifications on the ram for full automatic head changing system: Substitution of the adapter flange. Bolts in the ram will be substituted by hydraulic clamping cylinders (PLC activated). Electrovalves and hydraulic installation. H41 ORTHOGONAL INDEXING HEAD ▪Indexing positioning (Hirth coupling): Vertical joint (±360º) 1º Horizontal joint (±135º) 1º Indexing accuracy ±1” Joint clamping / unclamping Hydraulic Permissible tangential moment 13.250 Nm Each joint equips its own encoder to control rotation. ▪Tool spindle: Lubrication Refrigerated oil Bearings Angular contact Automatic tool clamping / unclamping Mechanical / hydraulic Sealing (nose) Air pressured labyrinth ▪Power transmission: Gear ratio 1:1 Lubrication Cooled oil Gears Klingelnberg teeth spiral bevel gears ▪Air blowing for taper cleaning purposes while automatic tool changing.

Condition: good (used), USED DEVLIEG 43H-72 SPIRAMATIC JIG MILL Equipped With: Spindle Diameter - 4" Spindle Nose Taper - No. 50 NMTB Spindle Travel - 20" Table Size - 35" x 72" Horizontal Travel - 72" Retraction of Table - 16" Vertical Travel of Head - 52" Spindle Speeds (16) - 21 to 1000 RPM Spindle Feeds (8) - .002" to .024" Milling Feedrates X & Y (16) - 0.5 to 36 IPM Rapid traverse in all directions Approx Floor Space - 205" x 146" x 126" Weight, Approx – 14.515 kg Dimensions: FB X RL - 11'8" X 16' with sliding gaurds X Height: 10'10" Fedpfx Aoimd H Njabspn all the tools/microbores from the pictures will be delivered together with the machine and are included in the final price. Price Euro 14.700 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Machine available for delivery within 15 days. Vertical 5-axis machining center MIKRON WF 41C. CNC Heidenhain 426. 16-tool magazine. Table length: 500 mm. Table width: 1000 mm. Max spindle speed: 4000 rpm. Spindle motor power: 4000 kW. In operating condition. Fpedpsxl Htfefx Aaben

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Fedpfx Aevz A Rieabjpn Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards.

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm Fsdpfx Ajvy Ihdsabepn number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

Condition: used, Year of construction: 2002, x-travel 2600 mm y-travel 1000 mm z-travel 1000 mm table-size 3.600 x 900 mm max. workpiece weight 8.000 kg no. of flutes 6 groove width 22 mm Fpodpfx Aogvqqloabon flute distance 125 spindle taper ISO 50 DIN 69871 number of spindle speeds 4.000 (2 Steps 0 - 1.000, U/min feed speeds 10 - 5.000 mm/min rapid speed 10.000 / 10.000 / 10.000 mm/min dimensions of the machine ca. 9,82 x 5,1 x 3,16 m weight of the machine ca. 21,5 t Control Engine: Spindle drive motor: 29 kW Feed drive motor Y-axis: 20 Nm, X- and Z-axis: 27 Nm Hydraulic motor: 2.2 kW Coolant pump motor: 0.50 kW Lubrication pump motor: 0.09 kW - Tool changer

Condition: used, For sale: the tool milling machine shown in the photos, manufactured by the German company Deckel, model FP3A. The machine offers manual, semi-automatic, and automatic operation modes. Controlled via G-codes. Control type: CNC 2102 Deckel. Fjdpoxluu Rjfx Aabspn

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Signs of use on surface recognizable on pictures Fpedpsuuh Sujfx Aabjn Dimensions: 38*68 cm Height: 25 cm

Condition: good (used), Year of construction: 1996, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 500 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, mount diameter: 40 mm, table length: 1,000 mm, table width: 500 mm, overall weight: 3,500 kg, X-axis / longitudinal 700 mm Y-axis / transverse 550 mm Z-axis / vertical 500 mm Table dimensions 1000 x 500 mm Spindle speed range stepless in 3 gear steps 25 - 4200 rpm Tool holder SK 40 Feed range X-Y-Z 1 - 10000 mm/min Rapid traverse X-Y-Z 10000 mm/min Weight approx. 3500 kg Control: Heidenhain TNC 407 - TNC 415 Fpjdoxg Rxbopfx Aabsn

Condition: ready for operation (used), Year of construction: 2003, operating hours: 54,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 20,000 rpm, table width: 850 mm, table load: 4,000 kg, table length: 2,100 mm, total height: 330 mm, total width: 2,570 mm, total length: 5,200 mm, type of input current: three-phase, overall weight: 12,000 kg, distance table to spindle center: 45 mm, quill travel distance: 500 mm, spindle motor power: 15,000 W, MANUFACTURER: PARPAS • YEAR OF MANUFACTURE: 2003 • MODEL: PHS 920P • OPERATING HOURS: 54,178 • CONTROL UNIT BRAND: HEIDENHAIN iTNC 530 TECHNICAL DETAILS GENERAL DATA • WIDTH: 2570 mm • LENGTH: 5200 mm • HEIGHT: 3300 mm • WEIGHT: 12,000 kg CONTROL SYSTEM • BRAND: HEIDENHAIN • MODEL: 530 Fpodexg Rd Rjpfx Aaben DRIVE • SPINDLE SPEED: 20,000 rpm (HSK A50) • SPINDLE POWER: 15 kW • NUMBER OF AXES: 5 TRAVELS • X-AXIS TRAVEL: 2000 mm • Y-AXIS TRAVEL: 1200 mm • Z-AXIS TRAVEL: 500 mm • A-AXIS ROTATION: +/- 65° • C-AXIS ROTATION: +/- 100° • MAX. RAPID TRAVERSE: 30 m/min TABLE • LENGTH: 2100 mm • WIDTH: 850 mm • T-SLOTS: 7 • DISTANCE BETWEEN T-SLOTS: 120 mm • MIN. DISTANCE SPINDLE TO TABLE: 45 mm • MAX. DISTANCE SPINDLE TO TABLE: 545 mm • MAX. TABLE LOAD: 4000 kg TOOLING • MAX. TOOL WEIGHT: 3 kg • MAX. TOOL DIAMETER: 50 mm • MAX. TOOL LENGTH: 150 mm • TOOL HOLDER TYPE: HSK A50 ADDITIONAL FEATURES • Spindle chiller • Air dryer for spindle lubrication • 20-position tool magazine with Heidenhain tool probe • Highly rigid construction • 5-axis simultaneous machining • Air and oil-cooled spindle • Z-axis compensation • Approx. 95 shrink-fit tool holders plus other accessories

Condition: used, Year of construction: 2004, x-travel 3.600 mm y-travel 920 mm z-travel 820 mm Control 840D pl ShopMill Siemens turning speed range - main spindle 20 - 18.000 min/-1 Fpsdpfx Aaeuntmqoben power capacity - main spindel 35 / 25 kW max. Torque 130 Nm tool taper HSK-A63 swivellable B: +/- 100 ° table surface area 4.200 x 900 mm max. table load 4.200 kg T-slots 9x 18H7 x 100 number of toolpositions 130 ( 120 +10 ) pos. tool taper HSK-A63 max. tool diameter 50 mm max. tool weight 6,0 kg max. tool length 200 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min feed speeds max. 20.000 mm/min total power requirement 92 kVA weight of the machine ca. 17,0 t dimensions of the machine ca. 11,0 x 5,5 x 3,0 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 360 linear - 5 Axis ( NC-Swivel-Milling-Head & LEHMANN - EA 430.2A ) - moveable tailstock - separated WorkingTable - internal Coolant-System - 120-pos. Tool-Magazine incl. cleaning-unit - 10 additional pos. for oversized tools - Machine equipped with increased accuracy

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 with Heidenhain path control TNC 155 with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Spindle: SK40 Chip guard, attachable Documentation for the machine and control is available. Fpsdexf Inkspfx Aabjn The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: good (used), Technical data Working area: 250 × 700 mm Copy table size: 430 × 600 mm Fjdpfoxgh R Uox Aabopn Travel / working range longitudinal (X): approx. 322 mm Travel / working range transverse (Y): approx. 200 mm Spindle drive / power: approx. 1.5 / 1.7 kW Spindle speed: approx. 80 – 20,000 rpm Copy ratio (enlargement / reduction): 1:1 to 1:4 Overall dimensions (approx.): 2,000 × 2,000 × 2,000 mm Weight: approx. 1,650 kg

Condition: used, functionality: unexamined, For sale are 3 milling heads with integrated quill by Scheller. €350 per milling head The heads were previously installed on FE 1-10 Scheller milling machines. A reference photo is included in the images. (PLEASE NOTE: MACHINE IS NO LONGER AVAILABLE. THIS LISTING IS FOR THE HEADS ONLY) Delivery throughout Europe is possible on request and at additional cost. Prices are excluding VAT. Viewings available by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale Fjdpsuabmbefx Aabopn PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or want to sell your own? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2004, gebraucht 2004 4540 prompt, Zwischenverkauf v Österreich 23700 € 1 19900 € 63 - 3150 (18) U/min 700 x 500 x 500 mm 900 x 500 mm 6.6 kW 2150 mm 2220 mm 2120 mm 2550 kg 500 kg 100 mm CNCHeidenhain TNC 410 18. mech. feeds with rapid travel in X,Y,Z axes ball screw spindles toolmaker accuracyDIN 8615 hyd. tool clamping with holdersSK40 vertical und horizontal vertical spindle+/- 30° swiveling swing out device digital 3D edge finder work area protection coolant equiptment aut. central lubrication fixed angle table with 10 t-slots chip collecting tray machine lamp users manual in GERMAN + CE Fodpfx Aowirmnsabepn COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO & UVV)

Condition: used, functionality: fully functional, HURE Milling Machine Brand: HURE Fedpfxjxltzpo Aabspn Longitudinal travel - X axis: 1000 mm Cross travel - Y axis: 600 mm Vertical travel - Z axis: 500 mm Table size: 1600x400 mm Spindle speed: 10 to 2000 rpm Approximate weight: 3300 kg

Year of construction: 1988, condition: good (used), Tool milling machine make: INFRATIREA, type: FUS-32, year 1988 Technical data: table 950 x 450 mm travels X / Y / Z: 500 / 320 / 400 mm spindle speeds 25 - 2000 rpm Fodpshaq T Tsfx Aabepn with digital display

Condition: used, Year of construction: 2023, gebraucht 2023 4546 prompt, Zwischenverkauf v Taiwan 32800 € 1 65 - 2600 U/min ISO 40 420 x 220 x 380 mm 840 x 390 mm 2.2 kW 1600 mm 1700 mm 2000 mm 1145 kg 840 x 390 mm Fodowirdgspfx Aabopn 1000 mm/min 5 14 x 63 mm 200 kg 420 mm 220 mm 380 mm 0 - 600 mm/min. 0 - 600 mm/min. 65 - 2600 90 - 310 mm 65 - 2600 +/- 90° ° 100 mm manuell 2,2 kW 950 x 250 mm 90 - 310 mm 100 - 480 mm demo machine / mint condition net price (price for new machine € 41.100,00) swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules

Year of construction: 1995, condition: good (used), travels: x=1600mm Y=800mm Z=900mm spindle speed max. 2000 revolutions per minute Control HH 407 A Fedpfxsh Nuhrj Aabopn Cover of z axis present but defective.