Used planer-type milling M/C - double column for sale (128)

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Hnjdpfx Agjx Ifdkewji Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Hnodpfx Agjw Au H Rowsi Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm Hnedpfxswywcie Agwsi A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Hnedpew Rl S Sefx Agwji Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Hnsdpsvy A Tnsfx Agwei Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Condition: new, Year of construction: 2025, machine/vehicle number: 306, First commissioning: 2024 Control: Heidenhain TNC 640 including handwheel HR 520 Hnedevy Dugspfx Agwsi X-axis: approx. 4,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,300 mm A-axis: ± 120° C-axis: ± 360° Clamping table Clamping surface: approx. 4,000 x 2,500 x 213 mm Aluminum with T-slots across every 250mm Max load: 1000kg distributed over the entire surface 2-axis milling head HS673 Spindle power: 22 kW Spindle speed: max. 24,000 min-1 Torque: 18 Nm Tool holder: HSK 63A Tool clamping: pneumatic Blowing air / MMS: outside Linear axis drives Feed rate X and Y axis: up to 60 m/min Feed rate Z axis: up to 40 m/min Color Housing, portal, control cabinet: light gray Z slider and milling head: orange Additional equipment - Work area cover - 16-way tool changer - Control in a separate, rollable desk Optional for an additional charge: - Blum laser tool measurement - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Images show identical machine with slightly different equipment!

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Hsdpfx Agjxl R Hvowoni Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: used, Year of construction: 2009, Year of manufacture: 08/2009 Commissioning: 03/2010 Control: Heidenhain iTNC 530 Technical Data: Tool holder: SK 50 Tool changer: 30 stations Spindle speed vertical, stepless: 4400 rpm Spindle speed horizontal, stepless: 3500 rpm Cutting capacity: 440 cm³/min Positioning accuracy: +/- 0.005/300 mm Repeatability of the automatic swivel head: +/- 3' Machine table (LxW): 4000 x 2000 mm Travel paths X/Y/Z: 4230 x 2150 x 775 mm Max. workpiece weight: 11,000 kg Rapid traverse X/Y/Z: 12 / 15 / 12 m/min Motor power: 22 kW Hodpfjya U Uuox Agweni Dimensions (LxWxH): 10,130 x 4,510 x 4,250 mm Machine weight: 27,000 kg Scope of delivery: - Chip conveyor - Tool cabinet - Approx. 80 tool holders including tools

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min Hsdovkit Aspfx Agwjni cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and ls the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: used, Year of construction: 2005, x-axis 3000 mm y-axis 1200 mm z-axis 750 mm Control S 840 D working area 3600 x 1200 mm feed - longitudinal/cross 0- 75000 mm/min Hodpfoycxc Iex Agwoni feeds vertical 0- 70000 mm/min spindle turning speed - stepless 100- 40000 U/min spindle motor 6 kW b-axis 285 ° c-axis 520 ° total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 5,2 x 2,3 x 2,5 m

Condition: used, Year of construction: 2017, x-travel 5850 mm y-travel 2500 mm z-travel 1000 mm Control 840D sl feeds x- + y-axis 20 m/min feeds z-axis 20 m/min acceleration 5 m/qs spindle drive - main spindle 60 kW spindle turning speed - stepless 24.000 U/min max. torque on the working spindle 87 Nm tool taper HSK-A63/F80 c-axis +/- 360 grad a- axis +/- 100 grad tool changer 20 stück coolant tank 2300 l surface area 6.000*2.500 mm number of T-slots 18 flute distance 125 mm dimensions of the machine ca. 14,8x7,3x5,8 m Machine table Width 2,500 mm Length 6,000 mm Number of T-slots 20 Distance of T-slots 125 mm Dimensions of T-slots 18H8 mm Max. table load 8,000 kg Hnedpfxsycln De Agwei Travels Cross rail: X axis 5,850 mm Cross slide: Y axis, horizontal 2,500 mm Z axis, vertical 1,000 mm Feeds X-, Y- and Z-axes Feed rate 20 m/min Rapid traverse rate 45 m/min Acceleration 5 m/s² Vertical Slide Cross section 560x420 mm Motor spindle Drive power S1 (100% ED) 60 kW Max. speed 24,000 rpm Max. torque 87 Nm Tool interface HSK-A63/F80 C-axis Swivel range ±360 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm A-axis Swivel range ±100 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm Total dimensions Length 14,800 mm Width 7,300 mm Height 5,800 mm

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm Hjdpfju I E Emox Agwoni 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: used, Year of construction: 2014, X-travel: 1250mm, y-travel: 1280mm, z-travel: 150mm, max. feed rate: 15m/min, repeat accuracy: 0.01mm, spindle rotational speed: 0-24,000/min, software: VCarve Pro, data formats: HPGL-3D / G-Code, spindle power: 6.5kW, controls: Siemens Sinumerik 808D Milling, weight: 1.2t, with collet spindle, Phenol vacuum high-pressure table, 850W servo motors Yaskawa, steel base, precision ball screws in all axes, x-axis with dual drive, linear guides, protective cover for all drive axes, suction foot for chip extraction, automatic spray cooling and material sensor. Hnjdpfxjwqd Rhe Agwji

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 4,230 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 850 mm, feed length X-axis: 4,230 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 850 mm, total length: 9,000 mm, table length: 4,000 mm, table width: 1,650 mm, total width: 3,500 mm, spindle speed (max.): 6,000 rpm, total height: 3,500 mm, distance between stands: 2,300 mm, rotational speed (max.): 6,000 rpm, overall weight: 30,000 kg, Equipment: rotational speed infinitely variable, X-axis: 4.230 mm Y-axis: 2.100 mm Z-axis: 850 mm CNC Controller: Heidenhain iTNC 530 Hsdpfsyac T Eox Agwoni Spindle nose: ISO 50 Spindle speed: 6.000 Rpm Toolchanger: 30 pockets Table size: 4.000 x 1.650 mm Distance between columns: 2.300 mm Featured with: - Vertical milling head attachement - Touch probe - Cooling throught spindle - Double chip conveyor - Cooling unit - Machine manuals Country of origin: Taiwan Machine LxWxH: 9000 x 3500 x 4000 mm +/- Machine weight: 30.000 kg

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min Hsdpfx Aevwglvsgwsni c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 4000 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm  (in direct exit)Distance between columns: 2530 mm Milling head Universal manual UM40Tool clamping system: HydraulicTaper nose: ISO50Speed range: 20 - 3.000 r.p.m. (5.000 r.p.m. direct exit)Spindle power: 30 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10926 x 4768 x 5110 mm Accesories Guarding: 2 sliding doors and new perimetral wire-mesh security ernal coolant. Electronic handwheel: New HR-510 Sales conditions Guarantee: 6 months mechanical partsSale price (Ex Work): On request View all technical features Hedjyf Rqvspfx Agwjni

Condition: like new (used), Year of construction: 2010, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-i530 Hnodpfxoyf Rrmo Agwoi Technical features Dimensions Table dimensions: 8500 x 2500 mmNumber of T slots: 17T slots dimensions: 22 mm Traverses of axis X axis traverse: 8000 mmY axis traverse: 3800 mmZ axis traverse: 1500 mmVertical capacity (VC): 168 / 1668 mmDistance between columns: 3100 mm Milling head Auto-indexing differential head UAD (every 0,02º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871) / Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 35000 kgMachine weight approximate: 79000 KgMachine dimensions approximate: 22700 x 7660 x 6800 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceAutomatic tool changer: ATC-60Chip conveyor: 2longitudinal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features

Condition: like new (used), Year of construction: 2004, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 5600 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmVertical capacity (VC): 450 / 1450 mmDistance between columns: 2700 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 25000 kgMachine weight approximate: 56000 KgMachine dimensions approximate: 13200 x 5425 x 5350 mm Accesories Guarding: 2 sliding doors and new perimetral wire-mesh security omatic tool changer: OptionalChip conveyor: 1 transversal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features Hedpsyf Rq Nofx Agweni

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Hsdeyf Rrtspfx Agweni Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 240 - 1240 mmDistance between columns: 2500 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10975 x 4770 x 5345 mm Accesories Guarding with 2 doors and new perimetral safety fenceAutomatic tool changer: ATC-60 (sale option with no ATC)Chip conveyor: 1 transversalElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsSale conditions: On request View all technical features

Condition: like new (used), Year of construction: 1996, Retrofitted: 2026 Hnedpfsyf Rr Tsx Agwji Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 6000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 6000 mmY axis traverse: 3800 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm (direct exit)Distance between columns: 3100 mm Milling head Universal head UM40 (Body B: manual / Body C: 3º auto-indexing) Direct spindleTool clamping system: HydraulicTaper nose: ISO50 (DIN-69871)  /  Pull stud: DIN-96872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Machine weight approximate: 50000 KgMaximum weight on table: 15000 kgMachine dimensions approximate: 14740 x 5330 x 5050 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceHead changer: automatic with lateral hinge/support in columnChip conveyor: 2 longitudinal palletsElectronic handwheel: New HR-510Coolant: External Internal high pressure through spindle (internal only with direct exit head) Sales conditions Guarantee: 6 months mechanical spare partsSale conditions and price: On request View all technical features

Condition: like new (used), Year of construction: 1996, Retrofitted: 2023 Hnodpfx Asyf Rtdogwsi Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 3000 x 1250 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mmY axis traverse: 1800 mmDistance between columns: 1680 mmZ axis traverse: 800 mm Milling head Head type: Standard vertical spindleTool clamping system: HydraulicTaper nose: ISO 50Speed range: 20 - 2000 r.p.m.Spindle power: 22 kW Feedrates Feedrate: 2 - 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Max Weight on table: 10000 kgMachine weight: 21500 kgMachine dimensions: 7300 x 2690 x 3400 mm Accesories Guarding: YesCoolant: ExternalElectronic handwheel: HR-330 Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features

Condition: like new (used), Year of construction: 1998, Retrofitted: 2024 Numerical control: SIEMENS 840D Hnjdpfx Agoyf Rq Ajwji Technical features Dimensions Table dimensions: 5000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmDistance between columns: 2500 mm Milling head Head type: C5E- 2 axis continuous headTool clamping system: HydraulicTaper nose: BT 50Speed range: 40 - 4000 rpmSpindle power: 37 kW / 372 Nm Feedrates Feedrate: 2 - 5000 mm/minX-Y,Z Rapid feedrate: 7200 / 12000 mm/min Weight and dimensions Max Weight on table: 25000 kgMachine weight: 40500 kgMachine dimensions: 12700 x 5070  x 4900 mm Accesories Guarding   Automatic tool changer: ATC-60Electronic handwheel: New SIEMENS 6FX2007-1AC04 Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request   View all technical features

Condition: used, Year of construction: 1965, Dimensions (L/W/H) 10460,0 × 5715,0 × 5537 mm Hodpfjuh E Tbox Agweni spindle head adjustment horizontal 3160 mm spindle head adjustment vertikal 1000 mm hobbing length 2250 mm weight of the machine ca. ca. 76660 kg t

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 6,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 650 mm, table length: 6,300 mm, table width: 2,500 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 3,500 m/min, rapid traverse Z-axis: 10,000 m/min, distance between stands: 3,050 mm, table load: 30,000 kg, overall weight: 59,000 kg, spindle nose: NT No.50, feed length W-axis: 1,300 mm, Okuma MCR-A5C gantry machining center (2013) with BT50 spindle, 6,500 mm X-travel and 30 t table load. Machine has approx. 5,700 cutting hours and 6,900 spindle hours, suitable for heavy and precise machining of large workpieces. Hodpfex Tzyxjx Agwoni

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,100 mm, CNC 5-axis Gantry Milling Machine BELOTTI Eureka 4014 (4000x1400mm) 5-axis milling machine / machining center Belotti Eureka 4014 Model 3414. Year of manufacture 2001. Machine in stock, in good condition, fully functional. Available immediately, including a refurbished spare 4kW spindle, software, and complete documentation. Primarily intended for trimming and milling 3D parts – plastic, carbon, laminate, MDF, wood, aluminium, etc. Spindle speeds: 18,000/600Hz – 24,000/800Hz Transport can be arranged. Axis travels: Hnsdpfeycin Ijx Agwsi    • X-axis: 4,000 mm    • Y-axis: 1,400 mm    • Z-axis: approx. 1,100 – 1,200 mm