Condition: new, Year of construction: 2025, minimax si 400es 32 M A 3 UP In heavy professional version with scoring unit and format sliding carriage made of anodized aluminum Art:No. 5504765 Dimensions and weights Length approx. 3710 mm Height approx. 1717 mm weight approx. 745 kg Connection suction Suction port diameter 120 mm Suction port diameter saw blade guard 80 mm Electrical data Power scoring motor 0,55 kW Power drive motor 7,0 kW Supply voltage 400 V Mains frequency 50 Hz Circular saw unit Cutting width with rip fence 1270 mm Max. Trimming width left of saw blade 3260 mm Trimming length 3200 mm Saw blade inclination 90 45 °. Max. Cutting height 90° 136,5 mm Max. Cutting height 45° 97 mm Explanation Max. cutting height Independent of scoring device Diameter saw blade 400 mm Explanation Diameter of saw blade Independent of scoring unit Saw blade speed 3500/5000 min¯¹ Sliding carriage and table Length of sliding table 3200 mm Width of sliding table 360 mm Height of sliding table 142 mm table length 940 mm table width 560 mm table height 900 mm Scoring unit diameter saw blade 120 mm Saw blade speed 9200 min¯¹ Scoring unit equipped with its own drive and easily adjustable from the outside Smooth-running and precise format sliding carriage made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened, 10-year warranty on wear of the guideways Large table extension (longitudinally adjustable) with material roller on telescopic arm Extendable telescopic cross-cut fence with two folding stops Precise rip fence, foldable for large panels, with quick clamping and integrated fine adjustment Table widening, table extension and eccentric clamp as standard equipment Sawing unit made of a robust cast iron ring with permanently precise dual pivoting segment guide and zero-point pivoting for a smooth and perfect cut, 6-year Holzkraft warranty on wear of the pivoting segments Large-surface work table made of stress-free gray cast iron Delq Sohk S S Ns H I Ajut High dead weight ensures precision and smooth running Equipped with powerful three-phase motor Version M: Height adjustment and tilting of the saw unit electrically, digital display for tilting Version A: On/off switch on the sliding carriage Version M A 3: Programmed control of the saw blade height and tilt and the position of the rip fence, stepless positioning of the rip fence via switch or automatic positioning system, position display via encoder, adjustment via ball screw, incremental adjustment possibility UP version: swivelling control panel at eye level Made in Italy Scope of delivery: Anodized aluminum format sliding carriage Material roller at the extension arm Saw parallel fence with round bar guide Table extension Table extension Folding stops Trimming shoe Eccentric clamp Handle for sliding carriage Saw blade pendulum protection Motorized height adjustment and tilting of the saw unit digital display for swiveling integrated on/off switch of the motors in the edger carriage READY3" version (3 axes) Swiveling control panel at eye level Location: Ex stock 54634 Bitburg Immediately available - Storage machine -

Condition: new, Year of construction: 2024, Solid, self-supporting, firmly welded, torsion-resistant saw frame Sturdy, durable saw-bar steel construction Robust bearing of the motor carriage ensures high cutting precision Powerful, low-vibration 3.9 kW (5.3 hp) motor TRK dust extraction system Automatically deflecting aluminum slatted frame with plastic supports Device for wall mounting ball bearing support rollers divided center support at optimal working height, with aluminum grids integrated small parts support made of wood Dolq S Hsihahbo I Asut Supersilent sound insulation for the reduction of saw blade noise Electromagnetic motor brake Weight of the saw approx. 910 kg Cutting depth 60 mm Saw motor power 3,9 kW (5,3 PS) saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 exhaust ports ø 100 mm Connected load 4,8 kW Mains connection 3 x 400 V / 50 Hz cutting range: L: 4600 ; Hvertical: 2200 mm , Hhorizontal: 2100 mm Equipment: - Compact 5220 - Scorer VSA stepless - Strip stop - Mech. braked support rollers - Free standing support compl. Location: Ex stock 54634 Bitburg - immediately available - Photo shows optional digital display, which is not in the on offer.

Condition: new, Year of construction: 2025, Panhans BSB 800 band sawing machine TECHNICAL DESCRIPTION Solid German machine construction Machine stand in shapely modern design torsion-free double-chamber welded steel construction Upper and lower door secured by limit switches Upper and lower precision band saw blade guide APA 2, size 2 Finely planed gray cast iron table Swivel table top up to 45 Dujlqjr Igzce S H I Aet Dyn. balanced band saw wheels with vulcanized rubber bandages Stop ruler can be used to the left of the saw blade, Fence profile can be reversed Blade tension indicator 1 piece saw blade5775 x 30 x 0.8 mm, tooth width9 mm, No. 3780.301 Mechanical height adjustment of the saw blade guard by hand wheel with locking pinion Rotary cam switch with star-delta start and emergency stop button Mechanical motor brake with main switch and motor protection relay CE-compliant GS tested Left-hand machine stand Rotary cam switch with star-delta start and emergency stop switch Wheel diameter 800 mm Belt speed 1800 m/min Cutting height 520 mm Cutting width 780 mm Blade length max. 5775 mm Saw blade width min. /max. 15 mm /4 0m m Optional with special coating Saw blade width min. max. 10 mm / 35 mm Table size 1145 x 760 mm Table height 930m m Suction nozzle 2 x 0 120 mm, Motor power 4 kW / 5.5P S Voltage 400 V / 50 Hz Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 525 kg Location: From stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1987, Elektra Beckum used wood band saw BAS 315/5 WN55 Year of manufacture: 1987 Dolq S H Isvkyd Sj Asut Serial No.: 2106584 Saw blade length: 2240mm Voltage: 230 volts Cutting depth: 170mm Parallel stop Base frame Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Work table dimensions: 610 * 431 mm Cutting speed: 900/450 m/min Flywheel diameter: 430 mm Max. cutting height: 270 mm Dujlq S Hovk Sd Ds I Ajt Max. cutting width with stop: 370 mm without stop: 410 mm Saw band length: 3345 mm Precision guide 3 rollers: top/bottom Saw table inclination: -10 degrees, + 45 degrees Motor power: 1550 watts/400 volts Weight: 130 kg Dimensions in mm: 680*512*2048 Extraction nozzle diameter: 2*100 mm Location: from stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Duolqjr Elmwj S H I Aet Year of manufacture 1982 With sliding table Swivel saw blade Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, HOLZKRAFT S 400 elite S - professional sliding table saws in heavy-duty design with scoring aggregate and format sliding carriage made of anodized aluminum. Art. No. 5504754 Standard with scoring unit with sepa- drive motor, adjustable from outside. - Lightweight anodized aluminum sliding carriage - Cast iron sawing unit with double segment guidance (double cradle) and zero-point swivel zero-point swiveling - High dead weight ensures precision and smooth running - 400 mm saw blade, cutting height 138 mm (even with pre-scorer installed) - Scorer as standard Duslebxpffeq S H I Ast - Saw blade anti-sway guard standard - aluminum format slide 3200 mm with very wide sliding carriage (330 mm) - therefore more supporting surface Technical data Table dimensions 940 x 560 mm Table height 900 mm Capacity 3200 mm Dimensions format sliding carriage 330 x 146 x 3200 mm max. cutting height 90°/45° with scoring 138 /98 mm max. clearance width left of saw blade 3260 mm cutting width with rip fence 1270 mm Saw blade inclination 90° - 45° max. saw blade diameter Ø 400 mm Saw blade diameter scoring Ø 120 mm Main saw blade speed 4000/5000 min-1 Speed scoring saw blade 9200 min-1 Motor power 400 V / 50 Hz / S6 - 40% 7 kW (9,5 HP) Motor power scoring 0,55 kW (0,75 PS) Suction port diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Machine ex stock Bitburg - free loading -. Special price for the stock machine subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2023, Striebig Evolution 5224 - Demonstration machine / Exhibition piece Machine if desired with cutting optimization OptiDivide with label printer and label layout EVOLUTION - Precision, ergonomics and functionality perfectly combined Automatic functions, such as automatic locking and swiveling or automatic and swiveling or the automatic insertion and removal of the saw unit, make your your daily work. You too can benefit from the advantages of an EVOLUTION. It can be controlled via a 12" touchscreen computer. The intuitive user interface ensures perfect processing of your orders in every detail. Comprehensive standard equipment Doljvkp H Aeq S H I Aout 12" touchscreen computer with optimum operator guidance Laser-supported display of the horizontal cut Digital measuring system DMS-XY Automatic saw beam locking with interface detection Automatic locking and swiveling of the saw unit Automatic infeed and outfeed of the saw unit Automatic fine adjustment of the saw unit Operating hours counter Tool database ALU center support over the entire machine length Integrated, powerful TRK dust extraction system. Dust limit value around 1mg/m³ Control cabinet attached directly to the saw frame Supersilent sound insulation Scoring unit: VSA scoring saw infinitely adjustable Complete free-standing support Complete aluminum small parts support UPS 24 VDC for Touch PC Uninterruptible power supply Weight of the saw approx. 1,100 kg Cutting depth 80 mm Saw motor power 5.5 kW (7.5 HP) Saw blade diameter 300 mm Saw blade bore 30 mm Emission sound pressure level at the workplace LpA 83 dB *3 Saw blade speed 4800 rpm 1 extraction nozzle ø 140 mm Compressed air connection 6-10 bar Connected load 7.5 kW Mains connection 3 x 400 V / 50 Hz Dimensions in mm: Type L H T1 free T2 wall 5224 5645 3018 1741 1361 Cutting range in mm: Type LS HS(vert) HS horizontal 5224 4300 2240 2100 Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue Dolq Sev Erkaj H I Aout T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: new, Year of construction: 2025, Holzkraft band saw HBS 633 S (IE3) In a heavy professional version with a saw blade quick-clamping system for professional users Article number: 5150063 DESCRIPTION Heavy professional version with a high weight for maximum smooth running Particularly smooth and precise running thanks to the torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, swivels from 0° to +45° with a ground and polished surface Patented table tilting device with handwheel and rack Saw blade quick clamping Precision saw blade roller guide Fast and precise cutting height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shutdown when the door is opened Large cast parallel stop With angle stop as standard Table tilt via rack and handwheel TECHNICAL DATA Dimensions and weights Length (product) approx. 1190mm Width/depth (product) approx. 820mm Height (product) approx. 2063mm Weight (net) approx. 377.7kg Extraction connection Extraction nozzle diameter 2 x 120mm Work table(s) Work table length 830mm Work table width 600mm Work table height 830mm Work table inclination 0 – 45° Explanation of work table inclination For safety reasons, a holding device/stop must be installed from 20° to prevent the wood from slipping! Electrical data Connection voltage 400V Mains frequency 50Hz Output power 4.1kW Cutting ranges Cutting height max. 90° 400mm Cutting width max. with stop 570mm Cutting width max. without stop 610mm Saw blade Saw blade speed(s) 1615m/min Flywheel diameter 630mm Saw blade length 4600mm Saw blade guide Precision guide top and bottom Delq S Hevk Sfbe I Aout Location: from stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, HOLZKRAFT S 400 elite S 32 MA Professional sliding table saws in heavy-duty design with scoring aggregate and format sliding carriage made of anodized aluminum. Art. No. 5504757 Machine equipped with : - motorized height adjustment and tilting of the saw unit - Digital display for tilting - Integrated on/off switch of the motors in the edger carriage Standard equipped with scoring unit with sepa- drive motor, adjustable from the outside - Lightweight anodized aluminum sliding carriage - Cast iron sawing unit with double segment guidance (double cradle) and zero-point swivel zero-point swiveling - High dead weight ensures precision and smooth running - 400 mm saw blade, cutting height 138 mm (even with pre-scorer installed) - Scorer as standard - Saw blade anti-sway guard standard - aluminum format slide 3200 mm with very wide sliding carriage (330 mm) - therefore more supporting surface Technical data Table dimensions 940 x 560 mm Table height 900 mm Capacity 3200 mm Dimensions format sliding carriage Duslq S H Ioi Dpgyo Aet 330 x 146 x 3200 mm max. cutting height 90°/45° with scoring 138 /98 mm max. clearance width left of saw blade 3260 mm cutting width with rip fence 1270 mm Saw blade inclination 90° - 45° max. saw blade diameter Ø 400 mm Saw blade diameter scoring Ø 120 mm Main saw blade speed 4000/5000 min-1 Speed scoring saw blade 9200 min-1 Motor power 400 V / 50 Hz / S6 - 40% 7 kW (9,5 HP) Motor power scoring 0,55 kW (0,75 PS) Suction port diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Machine ex stock Bitburg - free loading -. Special price for the stock machine subject to prior sale

Condition: good (used), Year of construction: 2007, Striebig panel saw Evolution 6224, year of manufacture 2007 Type 6224 Year of manufacture: 2007 Motor 5.5 kW Delq S H Iovk Sh Aj Ajut Cutting length approx. 5300 mm Cutting height approx. 2100 / 2240 mm Digital display in Y Center support Cutting depth 80 cm Saw blade diameter approx. 303 mm Free-standing installation Slatted frame moving away Wooden back wall Extraction connection D 120 mm Space requirement approx. 6300 mm x 1250 mm x 2720 mm Weight approx. 1200 kg Total connected load approx. 5.5 kW Location: from warehouse 54634 Bitburg, free loading, unpacked Handed over in the current condition as viewed without guarantee or warranty

Condition: new, Year of construction: 2024, EVOLUTION - precision, ergonomics and functionality perfectly combined Automatic functions, such as automatic locking and swiveling or automatic plunge-cutting and ejection of the saw unit, make your daily work much easier. your daily work. You too can benefit from the advantages of an EVOLUTION. It can be controlled via a 12" touchscreen computer. The intuitive user interface ensures perfect processing of your orders in every detail. Comprehensive standard equipment 12" touchscreen computer with optimum operator guidance Laser-supported display of the horizontal cut Digital measuring system DMS-XY Automatic saw beam locking with interface detection Automatic locking and swiveling of the saw unit Automatic infeed and outfeed of the saw unit Automatic fine adjustment of the saw unit Operating hours counter Tool database ALU center support over the entire machine length Integrated, powerful TRK dust extraction system. Dust limit value around 1mg/m³ Control cabinet attached directly to the saw frame Supersilent sound insulation Scoring unit: VSA scoring saw infinitely adjustable Complete free-standing support Paper holder High-end grid made of synthetic materials Small parts support aluminum complete UPS 24 VDC for Touch PC Uninterruptible power supply Weight of the saw approx. 1,100 kg Cutting depth 80 mm Djlqshf Dqbo S H I Asut Saw motor power 5.5 kW (7.5 HP) Saw blade diameter 300 mm Saw blade bore 30 mm Emission sound pressure level at the workplace LpA 83 dB *3 Saw blade speed 4800 rpm 1 extraction nozzle ø 140 mm Compressed air connection 6-10 bar Connected load 7.5 kW Mains connection 3 x 400 V / 50 Hz Dimensions in mm: Type L H T1 free T2 wall 6224 6645 3018 1741 1361 Cutting range in mm: Type LS HS(vert) HS horizontal 6224 5300 2240 2100 Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft sliding table saw with scoring device Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding table made of anodized aluminum, standard finish Dolqeih Dwvj S H I Ajut Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces The large dimensioned sawing unit made of cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, therefore extremely robust and insensitive smooth running and precise cuts Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminum telescopic stop Angle adjustable With two professional folding fences Ek2a0i2ik Rip fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table extension Anodized aluminum format sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm table height 900 mm trim length 1660 mm cutting height max. 90° with scoring 100 mm cutting height max. 45° with scoring 79 mm max. clearance width to the left of the saw blade 1270 mm Cutting width with rip fence 900 mm saw blade inclination 90° - 45 saw blade Ø max. with scoring 315 mm saw blade Ø max. without scoring 315 mm scoring saw blade Ø (option) 80 mm Main saw blade speed 4000 min-1 Speed scoring saw blade 7600 min-1 Electrical connection 400 V / 50 Hz motor power 4,0 kW Suction nozzle diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Weight 295 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1996, Striebig Standard TRK 6206 Year 1996 max. cutting width : 5300 mm Dujlq S H Iopwf U Ae Aet max. cutting height : 2060 mm saw blade diameter : 300 mm max. machining thickness : 80 mm saw blade bore : 30 mm tilting saw head : manual saw feed : manual saw blade speed : 4750 min-1 slatted frame : can be moved out of the way mounting : free standing suction : external suction locking saw bar : manual weight approx. : 1200 kg dimension 6250x1500x2900 mm engine power : 4.3 kW Location : Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Panhans band saw BSB 500 upper and lower APA II bandsaw guiding system swivelling table top up to 45 door safety by limit switch wheel diameter 500 mm drive motor 1,5 kW / 2,0 PS motor 400 Volt with motor brake Djlqjdq D I Hj S H I Aout belt speed 1.290 m/min. cutting height max. 320 mm cutting width max. 485 mm blade length max. 4.145 mm table size 500x680 mm table height 890 mm Suction nozzle 2x100mm space requirement: 900x525x1925 mm Weight 220 kg CE-conform, GS-tested ex stock 54634 Bitburg

Condition: new, Year of construction: 2024, Product detail Crosscut and mitre circular saws Type ZS 200NF Crosscut and mitre circular saw with maximum cutting height of 200mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal and 60° vertical readjustable fixed stops lower saw blade protection connectable to suction unit machine mounted on mobile machine base with 1,5 mtr. long roller conveyors left and right side left side with scale and stop slide technical data Dslq Sscnz Rvo H I Asut Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm ( not included in standard ) Suction nozzle 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - On request we can also offer you the saw blade.

Condition: new, Year of construction: 2025, machine/vehicle number: C890, PANHANS band saw Type BSB 600 Stand in modern steel construction, table top thick-walled, high ribbed cast iron massive grey cast iron band saw frames technology: - upper and lower PANHANS band saw blade guide APA II - finely planed cast iron table Djlq Sjbzmb He H I Ajut - swivelling table top up to 20 - dynamically balanced band saw blades with vulcanized rubber bandages - fence ruler can be used to the left of the saw blade - Fence profile can be folded down - blade tension indicator - mechanical height adjustment by hand wheel with locking pinion - automatic motor brake with main switch and motor protection switch technical data: - max. cutting height 380 mm - max. cutting width 570 mm - table size (BT) 590 x 810 mm - table height 905 mm - wheel-Ø 600 mm - engine power 2,2 kW - wheel speed 820 rpm - max. saw band length 4710 mm - suction nozzle-Ø 2 x 100 mm - machine weight 272 kg - machine size (LBH) 1120 x 750 x 2125 mm Location: ex stock Bitburg Top exhibition price Freely loaded

Condition: excellent (used), Year of construction: 2022, Used Altendorf F 25 Panel Saw - Year of Manufacture 2022 - Excellent Condition With Digital Parallel Stop Large Extractor Hood ----- Technical Specifications ----- Pivoting Range: 0 - 46° Carriage Length: 3,200 mm Parallel Stop: 1,000 mm with Digit X Cutting Height: 100 mm Max. Saw Blade Diameter: 315 mm Max. Saw Blade Projection: 104 mm Crosscut Stop Extendable to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor Power: 5.5 kW, 7.5 HP Work Table Height: 880 mm Type: F 25 Version 5 5.5 kW (7.5 HP) 2 Speeds Parallel Stop Digit X 1000 mm Large PSV Extractor Hood Without scoring unit, prepared for subsequent installation of a scoring unit Special price from stock 54634 Bitburg - available immediately - Dslq S Hewaq T Uo I Aeut

Condition: excellent (used), Year of construction: 2019, SCM / Holzkraft sliding table saw: minimax si 400es 32 M Heavy-duty professional version with scoring unit and sliding table made of anodized aluminum Item number: 5504756 TECHNICAL DATA Dimensions and weights Net weight approx. 715 kg Extraction connection Extraction nozzle diameter 120 mm Extraction nozzle diameter of saw blade guard 80 mm Installation information Transport width 990 mm Machine body length 1900 mm Machine body width/depth 885 mm Space requirement length 7180 mm Space requirement width/depth 4860 mm Explanation of space requirements: The dimensions take into account maximum travel distances or usable lengths. Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirements to determine the machine's maximum capacity. to obtain the recommended free space. Electrical Data Supply voltage 400V Mains frequency 50Hz Scoring motor power 0.55kW Drive motor power 7.0kW Nominal operating mode of drive motor S6 Drive motor duty cycle 40% Sliding carriage and table Sliding carriage length 3200mm Sliding carriage width 360mm Sliding carriage height 142mm Table length 940mm Table width 560mm Table height 900mm Circular saw unit Cutting width with parallel stop 1270mm Max. cross-cutting width to the left of the sawblade 3260mm Trimming length 3200mm Sawblade inclination 90–45° Max. cutting height 90° 136.5mm Max. cutting height 45° 97mm Explanation of maximum cutting height: Independent of scoring unit Sawblade diameter 400mm Explanation of saw blade diameter: Independent of scoring unit Saw blade speed: 3500/5000 rpm Scoring unit Scoring saw blade diameter: 120mm Duolq Sewaq Tuo H I Aot Scoring saw blade speed: 9200 rpm Scoring unit equipped with its own drive and easily adjustable from the outside Smooth-running and precise format sliding carriage made of anodized aluminum with a proven and permanently smooth-running ball contact system on hardened guideways, 10-year warranty on wear on the guideways Large-area table extension (longitudinally adjustable) with material roll on a telescopic arm Extendable telescopic crosscut stop with two folding stops Precise parallel stop, foldable for large panels, with quick-action clamping and integrated fine adjustment Standard with table extension, table extension, and eccentric clamp Saw unit made of a robust cast iron ring with permanently precise double swivel segment guide and zero-point pivoting for smooth and perfect cutting Cut, 6-year Holzkraft warranty against wear on the swivel segments Large work table made of stress-free gray cast iron High weight ensures precision and smooth operation Equipped with a powerful three-phase motor Model M: Electric height adjustment and tilting of the saw unit, digital display for tilting Location: from stock in 54634 Bitburg - immediately available - - free shipping - No warranty - no guarantee - In as-is condition - can be inspected