Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: -, ORMA NPC/DIGIT 6/95. Press area of 3000x1300 mm, six cylinders.Press opening stroke 650 mm. 3 loads. Pressure 90 ton. 18 kW electro-heater for thermo-oil heating up to 120°C. Parallelism control by sensor. CE-standard. Transport throughout Europe is available at a good price. Dedpfxjyf Azgo Afpjun

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 • Hydraulic presses for gluing construction timber and blockboards • Compact footprint with front loading • Chassis on wheels, two of which are steerable • Height-adjustable hydraulic cylinders with manual adjustment—practical and functional • Vertically adjustable columns with frame pressing device Technical data: Working surface(s): 1 Usable dimensions: 2500 x 1800 mm Dedpskwhb Hjfx Afpsun Number of vertical hydraulic cylinders with manual adjustment: 3 Number of horizontal manual hydraulic cylinders: 2 Travel of hydraulic cylinders with manual adjustment: 60 mm Pressure of hydraulic cylinders with manual adjustment: 1500 kg Installation dimensions approx. 3200 x 800 x 2200 mm Location: Flörsheim Availability: short notice

Condition: excellent (used), functionality: fully functional, working width: 300 mm, working length: 3,000 mm, Block press / Stationary press for multilayer parquet Manufacturer: Soest Model: T 80 Cold press, previously used for pressing multilayer parquet CE mark Dedpfoygclujx Afpsun Pressing width approx. 300 mm Pressing length approx. 3000 mm Maximum opening height approx. 1000 mm 4 pressing cylinders Pressing force 80 t Total connected load approx. 3.5 kW Weight approx. 2500 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 867, input current: 16 A, input frequency: 50 Hz, space requirement width: 800 mm, space requirement length: 3,950 mm, space requirement height: 2,400 mm, height adjustment type: electric, table width: 670 mm, overall weight: 2,300 kg, workpiece height (max.): 1,400 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 650 mm, - Press length: 150-2500 mm - Press height: 150-1400 mm - Press depth: 650 mm - Programmable pressing time Duedpfx Afoydqulspjn - Adjustable pressing force - Pressure build-up via frequency-controlled gear motors

Condition: used, Year of construction: 2000, Pneumatic clamps to immobilize chairs while the operator performs operations, for example via screwdriver or similar Working dimensions: cm. 50x60 Dusdpfxoydb Hxe Afpon

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2101177, height adjustment type: electric, type of input current: three-phase, Pelletizing plant for wood / straw / hay / sheep’s wool / feed – currently still in operation – inspection possible - Raw material bunker with discharge to cutting mill, suitable for wood chips up to and including G30 size + conveyor belt - Cutting mill 22.5 kW with spare blades - Material bunker 4 m³ with discharge conveyor belt, LP series - Pellet mill LP22 (integrated central lubrication, water pump, and temperature monitoring ensure maximum user-friendliness) - Screening unit with conveyor belt for LP22 (incl. level sensor for BigBag and sensor cable for connection to pellet mill LP22) - 6x Vario BigBag rack, 1.5 m³ each - 20x production BigBags for pellets - Dies for wood pellets available in sizes 6x19mm to 6x24mm - Dies for straw and hay pellets: 8x25mm Djdpfxjxwzkij Afpsun For further information, please do not hesitate to contact us.

Condition: used, Year of construction: 1988, functionality: fully functional, Bühler animal food processing pelletpress. Bühler DPAA – 83017 Matritce inside dm = 520. Matritce working with 140 mm 110Kw- was working fine until demounting. Dsdpfjyahk Njx Afpoun Available totally 2 sets. Coolers are missing- dust extraction included.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Pellet plant and bagging system - Inspection possible Duedpjw Hrg Njfx Afpen - Raw material bunker 4 cubic meters with discharge into a cutting mill, suitable for wood chips up to or smaller than G30 + conveyor belt - Cutting mill 22.5 kW with soundproof cabin - Material bunker 4 cubic meters with discharge conveyor belt, LP series - Pellet press LP22 (Integrated central lubrication, water pump, and temperature monitoring ensure a high level of user-friendliness) - Screening unit with conveyor for LP22 (incl. fill level sensor for big bag with pivoting holder and sensor cable for connection to pellet press LP22) - Big bag frame Vario 1.5m³ - Bagging system suitable for Vario BigBag system For further information, please do not hesitate to contact us.

Condition: excellent (used), Bargain from Swiss liquidation in excellent condition: Höfer press 2500/1300 with electric plates Djdpjx Tbh Asfx Afpoun

Condition: refurbished (used), Year of construction: 2021, operating hours: 520 h, functionality: fully functional, machine/vehicle number: 3241, Model/Type: RUF LIGNUM R6 Machine No.: 3241 Year of construction: 2021 Dsdpfxsyfgz Dj Afpeun Drive motor: 37 kW Throughput capacity up to max.: 720 kg/h (depending on material) Pressing pressure: 1700 kg/cm² Briquette format: 150x60 mm Operating hours: approx. 520 h Warranty: 12 months after delivery Availability: approx. 4 - 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 + 400 x 800 mm hopper with extension

Year of construction: 1988, condition: excellent (used), 2 front hydraulic rams Dodpfjg Ulahex Afpjun 2 side hydraulic rams Max working area 1650 x 2300

Condition: good (used), Year of construction: 1999, The maximum working area is 3000 x 1600mm Minimum working area 390 x 420mm 2.2kW engine Duedpjg Np Raofx Afpen Weight 1500 kg

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Duodpfxjlnanwj Afpen

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, briquette diameter: 60 mm, Refurbished machine suitable for smaller, single-shift carpentry operations. It offers a robust construction while providing solid performance. Maximum briquette output: 70 kg/h. Year of manufacture: 2003. In very good and well-maintained condition. Original warranty and post-warranty service available directly from our company. Professional PRODECO hydraulic briquetting presses are ideal for small and medium-sized woodworking operations. They enable efficient processing of waste into environmentally clean, high-calorific fuel without the need for binders. These machines are characterized by compact space requirements, low energy consumption, and easy operation. Technical specifications: - Motor power: 5.5 kW - Briquette output: 35 to 70 kg/h (depending on material) - Briquette diameter: 60 mm - Briquette stroke length up to 60 mm (so-called endless briquette) - Hopper diameter: 1000 mm - Weight: 650 kg - Machine dimensions: 1170 x 1700 x 1510 mm Features: - Hydraulic unit with 7 pressing cycles/min - Dual manometer for improved pressure monitoring - Level sensor for the height of briquetted material - Oil level sensor - Inspection window - CE safety standard compliant Dusdevva Rpspfx Afpsn - Moisture content of processed material must not exceed 18% The machine is refurbished, calibrated, and tested.

Condition: good (used), Self-adjusting through-clamp for movable bodies • Min/max usable length: 2500 mm • Min/max depth: 600 mm Dusdpfx Aeuh Ai Hofpen • Min/max useful height: 1200 mm • No. 3 side stops • Compressed air consumption: 6 bar • Installed power: 1.1 kW • Dimensions: 7050 x 1300 mm

Condition: used, Year of construction: 2021, Drawer Clamping Machine – STROMAB STC 2500 B Technical Description: • Working capacity: 2100 x 1000 mm • No. 2 working stations • Two-hand safety control button • No. 8 pneumatic cylinders, diameter 115 mm • Thrust per cylinder: 700 kg • No. 8 cast iron squares, height 170 mm Machine Configuration: • Frequency: 50 Hz Duodpsxg I Slsfx Afpjn • Standards: CE compliant • Electrical supply: 400 V – three-phase

Condition: used, Membrane Press - ORMA PM, CE Working dimensions: 2400 x 1000 mm Pressing force: 200 t Heating plates: Yes Double membrane: 1 Principle: Overpressure system Total power: 52 kW Overall dimensions: 3800 x 2000 mm Dsdpfxsxvzahe Afpeun

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 990-185, overall weight: 4,500 kg, input current: 80 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 1,000 l, noise level: 83 dB, Equipment: cooling unit, emergency stop, The WEIMA TH1500 briquetting press compacts all materials suitable for pressing within a single die. The resulting briquette is dimensionally stable and alternately ejected, ensuring smooth and continuous operation. The axial piston hydraulic pump, powered by a 30 kW motor, produces up to 7 briquette cubes per minute. A distinctive feature of this model is the precision die where the pressing process takes place. The movement sequences of the cylinders and the die are monitored and controlled by a displacement measurement system, ensuring high accuracy, repeatability, and consistent briquette quality. Technical Data: Hydraulic system motor power: 30 kW Operating voltage: 400 V / 50 Hz Nominal current: 80 A Protection fuse: 125 A Current drawn by hydraulic system: 55 A Machine weight: 4500 kg Oil tank capacity: 1000 l Duedpfx Aoxtm Ilsfpjn Output: approx. 7 briquette cubes/min Other available machines: Serial no. 990-184 – Year 2014

Condition: used, used Brand: Maweg Type: RPV Machine no.: 74019 Cylinders horizontal: 2 Cylinders vertical: 3 with weight compensation Cylinder stroke 100 mm Working width 3700 mm Duodpswqg R Rofx Afpen Working height 2480 mm Press depth 100 mm hydraulic Additions for small window sizes Space required approx. 4200 mm x 1350 mm x 2900 mm Weight approx. 1200 kg Total connected load 2.2 kW Storage location 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected without guarantee and warranty

Condition: used, Multi-level gluing press used, good condition Dusdovwgggepfx Afpjn Brand Beck Multi-level press with 7 levels Counter bearing 2 pendulum bearings for diagonal gluing Pressure beam length 1200 mm height 60 mm Working length approx. 1200 mm Clamping depth 780 mm Max. material thickness approx. 60 mm Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition, as viewed, without guarantee or warranty

Condition: used, used Manufacturer Joos Machine no. 790 1 level Plate size approx. 2200 mm x 1100 mm Djdpfxewrtlqe Afpeun Opening width approx. 280 mm Aluminum plates Piston diameter 80 mm Space requirement approx. 2800 mm x 1300 mm x 1850 mm Weight approx. 3000 kg Total connected load 13.2 kW heating power Storage location 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected, without guarantee and warranty

Condition: used, Year of construction: 1993, used, in excellent condition Brand: Hess Model: Express Year of manufacture: 1993 Machine no.: 100914/28 Cylinders per press element: 2 - 110 mm stroke Number of press elements horizontal: 3 Number of press elements vertical: 3 Duedpfx Afjxuv N Uspen Working width: 2500 mm Working height: 1350 mm Press depth: 600 mm Pneumatic Height adjustment: electric Space requirement approx. 3600 x 800 x 2450 mm Weight approx. 1200 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without warranty or guarantee

Condition: used, with new Mylar film used, in good condition Brand: Joos Year of manufacture: 1981 Machine no.: 81/10621 1 level GS certified Plate size approx. 2550 mm x 1350 mm Opening width approx. 400 mm Tip control Swivel control panel Lower safety bar Djdpfx Afoww Nd Hepjun Side guide Electric heating Max. pressing force 90 t Aluminium plates Piston diameter 80 mm Required space approx. 3000 mm x 1600 mm x 2100 mm Weight approx. 3000 kg Total connected heating load 20 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: new, - NEW - Standard configuration: - 3 pressing units, 90-degree stop. - 1 side pressure device with 2 trapezoidal spindles. Description: A multifunctional gluing and frame press for precise and angle-accurate assembly, ideal for gluing drawers, carcasses, panels, and much more. The pressure units use trapezoidal spindles with pressure bearings made from precision tubes, delivering 2 tons of pressure and a 120 mm stroke. Pressing units mounted on ball bearing guides, galvanized, with a 100 mm precision hole grid. All profiles are made from thick-walled rectangular tubes. Clamping dimensions: (HxW) 1170 x 2110 mm Including special accessories: Dodpfx Aoxcyxiofpoun 1 pressing unit with trapezoidal spindles for LEIMO PRO 2 hold-down clamps for LEIMO PRO

Condition: used, Year of construction: 1984, Special pressing size, large pressing depth 1600 mm Pressing length 2750 mm Plate size 2750 mm x 1600 mm - 2.75 x 1.60 m - with 3 heating plates 2 levels incl. control system – newly retrofitted retrofitted Used, in good condition Manufacturer: Ott Model 300 K 135 Year of manufacture: 1984 Dodpfx Afsv Hhudopoun Machine number: 13741 Number of levels: 2 pieces Cover sheets hard-anodized Plate size approx. 2750 mm x 1600 mm Opening width approx. 185 mm Tip control Safety cable below Side guidance Electrical heating Specific pressing pressure max. 5.5 Piston diameter 90 mm Lower pistons: 6 units Original price approx. €40,000 Space required approx. 3600 mm x 1600 mm x 2000 mm Total connected load 49 kW Storage location: 97447 Gerolzhofen, loaded free, unpacked Delivery in the current as-inspected condition, without warranty or guarantee