Condition: excellent (used), Catalogue number 7737 TECHNICAL SPECIFICATIONS - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1000 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg Nsdpfsxbr I Hsx Aa Ijwn ADVANTAGES – Italian manufacture – Used briquetting press – Technical documentation (DTR) – In very good condition Net price: 36,900 PLN Net price: 8,780 EUR at an exchange rate of 4.2 EUR (Prices may vary in the event of significant fluctuations)

Condition: used, Briquetting plant consisting of: * Spänex filter tower with rotary valve * 2 x extraction fans * Spänex SHB 250 K1 briquette press The filter tower extracts the material from the production line, where it is transported to the briquetting press's material silo via a rotary valve and another fan. Material silo: 4 m³ fan: 11 & 4 kW Nedpfx Ajxp Izrea Ijwn power: approx. 6 briquettes/min

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Nwodpfxovvkmbj Aa Ijn

Condition: used, functionality: fully functional, For sale: used Amandus Kahl 45-1250 250KW granulator, Nwjdpfoxq Tm Ajx Aa Ien

Condition: good (used), Year of construction: 2025, Requirements: - Material must be free-flowing (less than 18 mm) - Material must be pure, with ash content below 1% ATRO Caution concerning: sand, stones, and mineral content - Material is compacted by pressing tongs - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Optional upgrades available: Plant engineering / mütek Systemtechnik: - mütek Shredder MRZ size-reduction technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Screw conveyors - Silos - All types of control system integration - Semi-automatic packaging solutions + 24h operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Achievable briquette density of up to ≥ 1 kg/l *Details after testing Nodpfx Asfbb Aroa Iewn Functionality: The machine features a silo with agitator. Each of the four corners of the storage silo contains a vertical screw which compacts the material downward into the press chamber. The machine operates with two cylinders, each pressing in both directions (either as the cylinder moves forward or backward). This produces four briquette outlets, each generating six individual briquettes. *Ideal for automatic feeding of the heating boiler Format: Ø 30 mm Throughput capacity: up to 310 kg/h maximum Motor power: approx. 27 kW (total) Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format enables fuel feeding of industrial firing plants via screw conveyor Fully automatic 24h operation possible High energy efficiency Briquettes/pellets with consistently high quality and density For automatic feeding into industrial combustion systems Small to medium quantities of wood chips generated in various processing industries (especially wood, biomass, etc.) can be efficiently compacted. The small Ø 30mm format represents an attractive alternative. Unlike our conventional briquettes, these can be fed automatically into industrial combustion systems. In addition to wood, a wide variety of other materials can also be processed without issue (various types of biomass and agricultural residues).

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 240850, overall weight: 1,600 kg, working length: 7,000 mm, clamping range: 1,350 mm, It was in working condition until it was replaced, hasn't been used for years. Has been stored in dry conditions is a shed, outside temperature, there has some rust appeared and needs maintenance. If you have any questions don't hesitate to ask! Workpiece max length 7000mm, max height 1350mm. Nsdpfxjwxvc Se Aa Iewn

Condition: excellent (used), Year of construction: 2021, operating hours: 350 h, functionality: fully functional, The vacuum membrane press with a pneumatically lifted membrane is designed for heating and forming thermoformable materials such as PET felt, solid surface (CORIAN, HI-MACS, STARON, KERROCK, LG, PLEXIGLAS, and others), which can be molded into any shape after heat treatment. It is equipped with a heating system that shortens the bonding time and increases production efficiency. The TVG series vacuum presses are intended for both small and large manufacturing facilities. Manufacturing date 2021 Applications • Veneering flat and shaped elements with natural veneer (doors, frames, chairs, tables, furniture, coffins) • Laminating elements with HPL laminates in 2D format (kitchen countertops, window sills) • Pressing textured surfaces (stone veneer, decorative mats) • Manufacturing components using the sandwich method (columns, semi-circles, flat surfaces) • Wrapping car cockpit elements with leather (dashboard, gear shift lever, etc.) • Forming mineral-acrylic solid surface materials such as Corian, Staron, Hi-Macs, etc. • Forming thermoplastic plastics • Forming PET feltProduct Models – TVG Special Series Construction of the Press • Steel Frame: The press is built on a robust, welded steel frame ensuring stability and durability during operation. • Vacuum Table: The worktable is equipped with a vacuum system that securely holds the material in place during the forming process. • Membrane System: A flexible, heat-resistant membrane is pneumatically lifted and lowered, allowing precise pressure distribution on the material. • Heating System: Integrated heating elements (infrared or quartz heaters) provide uniform heat distribution, essential for effective thermoforming. • Control Panel: An intuitive control panel allows easy regulation of temperature, vacuum pressure, and membrane operation. • Vacuum Pump: A high-performance vacuum pump ensures efficient air evacuation for tight membrane adherence. • Safety Features: Equipped with safety sensors and emergency stop buttons to ensure operator protection. • Optional Components: Additional options may include programmable controllers (PLC), touchscreen interfaces, or automatic cycle control for improved process automation. Nodpfxjxqzzho Aa Iown • Technical Specifications Parameter Working field size (length × width), mm: 3000 × 1500 Maximum height of the processed element with 500mm width in the center of the field: 550 mm Heating plate size, pneumatically lifted: 2000 × 1000 Silicone membrane 700%, max temperature: 230°C Heater power, kW: 6 kW + hot air circulation Pump power, kW: 1.25 Vacuum pump capacity, m³/h: 40 Working vacuum, kg/cm² (bar): – 0.85 Protection level: IP53 Noise level, dB: < 70 Voltage, V: 3P 400 50Hz Machine dimensions (mm): – Length 3500 – Width 1800 – Height (working) 2200 (3100) Weight, kg: 1250 The TVG Special models are equipped with a pneumatically lifted membrane, ensuring high precision and repeatability of forming processes. The reinforced structure and advanced control system guarantee reliable operation in continuous production environments.

Condition: used, Veneer press Ott type 300 K 100 with electrically heated plates for pressing veneer or other workpieces. Nedpfx Aoxqff Doa Iswn Pressing surface: 255 x 135 cm

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Storage location: Nattheim Nwodpfx Aevvkl Doa Ijn

Condition: ready for operation (used), Year of construction: 2019, CPM briquetting press capacity: 800-1200 kg/h Njdsxqlmhopfx Aa Iewn diameter: 70 mm

Condition: used, Year of construction: 1996, Press area: 3000mm x 2100mm Pressing depth: Press elements vertical: 6 Pressure build-up: manual hydraulic Nwsdjwv Ncmepfx Aa Ien Pressing pressure: Cylinder stroke: approx. 100mm Machine length: 3000mm Machine width: 800mm Machine height: 2500mm Weight: 2000kg

Condition: like new (used), Year of construction: 2022, operating hours: 140 h, functionality: fully functional, The Mark-8 press is a single-cylinder C-frame press with independent individual tables. Features: Single-column press, C-frame type. 12 metal tables, 1 ridge table, 2 base tables, 4 crossbow tables, 4 dovetail tenon tables, 1 dovetail tenon table. Individual tables with electromagnetic adjustment. Balancing system with integrated hydraulic unit, moving along an IPN beam. Advantages: Simplicity and cost-effectiveness Nodjxqryzopfx Aa Iswn Ergonomics in operation Capability of manufacturing large farmhouse elements. Optional integration of ejectors possible.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, working length: 3,000 mm, working width: 2,030 mm, total width: 1,100 mm, total length: 3,300 mm, total height: 2,720 mm, table width: 120 mm, overall weight: 1,200 kg, Edge Press, Beam Type SCM Falcon/S Specifications: • Condition – Used, after inspection • Manufacturer – SCM • Model – Falcon/S • Maximum gluing dimensions – 300 x 203 cm Nedpjxn Tqvefx Aa Ijwn • Remote control for pistons (independent vertical and horizontal control) • Double-T beams, 12 cm wide • Two vertical pistons with 60 mm diameter and two smaller horizontal pistons with 35 mm diameter • Maximum vertical piston pressure – approx. 15,000 kg • Maximum horizontal piston pressure – approx. 5,000 kg • Maximum pressure – 160 bar • Pump motor – 3.0 kW • Year of manufacture – 2002 • Overall dimensions: 335 x 110 x 272 cm (L x W x H) • Weight – approx. 1,200 kg Additional information: • Very good, factory technical and visual condition • The photos shown represent the actual item for sale • Possibility to power up and inspect the machine on site.

Condition: good (used), CPM 3000 110kW granulator with conditioner and dispenser Nwedpfx Aewcdnwoa Ion

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. General Features: - Robust construction - Very user-friendly and economical to operate Nwedpfx Aaowyc H Te Ien - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Circuit diagram - CE compliance - Operating manual Technical Data: - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Hydraulic tank capacity: approx. 180 liters - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total height: 2,070 mm, total length: 2,000 mm, total width: 1,200 mm, overall weight: 600 kg, Comafer K100, output 100 kg/h. 6mm pellets, chips with 8-12% moisture content. Material is ground by a mill to the appropriate fraction (5.5 kW), then fed by a screw conveyor into a ring die pellet mill (7.5 kW) where it is compacted. The process is fully automatic, controlled from an electrical control cabinet. Very high pellet quality. Nodpjw Hnglofx Aa Iown

Condition: ready for operation (used), Year of construction: 2006, In good condition briquette press, ready for use. The hydraulic pump was replaced 6 months ago. Equipped with a new, more powerful and efficient electric motor, as well as a new oil pump, ensuring better productivity. The machine has no oil leaks and has been serviced exclusively by the official RUF representative in Latvia. Nwedpjw Spknefx Aa Isn

Condition: good (used), Year of construction: 2003, Automatic hydraulic gluing press Kallesoe Type LV 7821 press is used for gluing wooden elements, e.g. tabletops with maximum dimensions of 7800 mm x 2100 mm, the factor which accelerates gluing is warm water supplied to the press shelf and being in continuous circulation (it can be supplied from CO or heated by heaters mounted on the press) Heating power of the press 72kW Maximum capacity of the press up to 2000 m2 / 7.5h Glue applicator with feeder for Kallesoe press Type KL40 - used to automatically apply glue to each lamella and transfer directly to the press LV7821 Njdorqzgkopfx Aa Ijwn

Condition: excellent (used), Year of construction: 1988, Manufacturer: Agostino Colombo Model: G 1600 Year: 1989 Condition: Used Stock number: 0386 Press force: 1600 tons Number of pressure points: 2 Ram stroke: 135 mm Ram adjustment: 20 mm Die height from die holder cbra: 635 mm Nwedjxnx Hispfx Aa Ion Die holder table size: 1,060 x 900 mm Lateral passage in the frame: 400 mm.

Condition: excellent (used), Year of construction: 2021, operating hours: 150 h, functionality: fully functional, machine/vehicle number: 47/11/21, type of input current: three-phase, The VPF series vacuum press is designed for laminating with PVC foil as well as veneering with natural wood veneer. It is suitable for both small and large manufacturing facilities. The VPF Vacuum Press is fully automated and features three operating modes: - Automatic Mode: After pre-setting the working parameters on the PLC controller, the press automatically performs all actions (heating, pressing, cooling). - Manual Mode: The operator manually carries out all operations. - Membrane Mode: Intended for use with a membrane for veneering and laminated bending (also available in automatic mode). Working area: 1400x3000 mm Max temperature: 140°C Power: 30 kW Power supply: 3P 400V 50Hz Dimensions: 3500x1700x2200 mm Weight: 1150 kg APPLICATIONS: - Laminating flat components with PVC foil (kitchen fronts, window sills) Nwjdpsxpqt Defx Aa Isn - Veneering straight and shaped elements with natural wood veneer (doors, frames, chairs, tables, furniture, coffins) - Laminating components with HPL laminates in 2D format (kitchen countertops, window sills) - Pressing of structured surfaces (stone veneer, decorative mats) CONSTRUCTION: - Robust welded frame, powder-coated - Infrared heating system with carbon heaters - Three heating zones with adjustable temperature - Pneumatic cylinders for lifting the heating dome - All-round access to the working table - Integrated PLC controller for automated operation - Equipped with an electronic vacuum control system - Working table surface made from HPL board - Built-in oil-lubricated vacuum pump (100 m³) – 0.9-0.95 bar (9000-9500 kg/m²) - Integrated 100-litre buffer tank - Upper heating dome made of aluminum

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg Nwsdpfx Aaodx R Tfe Ien - immediately available-

Year of construction: 2008, condition: excellent (used), Electric heating element Shock- and impact-proof plug-in heating system with heating conductors embedded airtight in silicone.No wear, no corrosion, operational safety even in continuous operation and in case of impacts and shocks. Temperature adjustment via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressing surfaces on all sides. Gold anodized finish as standard, scratch and abrasion resistant, easy to clean. Size:Type: EST 21 Nwodslcd Szopfx Aa Ion Length: 2100 mm Connected load: 1100 Watt, 230 Volt Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2016, LAMELLA – CASE CLAMP PRESS GANNOMAT “CONCEPT 70 ECO” Complete in standard configuration including: - Sturdy, torsion-resistant steel frame, constructed with welded and bolted assemblies - UPPER lamella pressure beam with 6 elements, SIDE lamella pressure beam with 5 elements - Lamella pressure beams feature the tried-and-tested tolerance compensation system (Ganner system) for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance lead nuts with grease reservoir - Clamping is electromotor-driven, with two separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is continuously adjustable electronically using two potentiometers and regulated via frequency inverters, providing a completely wear-free press force control - Pressing force for horizontal beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for vertical beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speeds of the pressure beams with fine positioning, switchable via 3-stage selector: 5 / 10 / 25 mm/sec - Extremely user-friendly operation - Working height/loading height: 300 mm Nedpfx Aaew Td A Io Iswn - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Overhauled by Ganner, with 6-month parts warranty Location: ex stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Manufacturer: Hess Type: Export Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Weight: 1,060 kg Hess Corpus Press Export, pneumatic Nwjdpsxgvwpsfx Aa Ion 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Anodized measuring scales, detachable feet Location: Ex works customer site - Immediately available -

Condition: as good as new (ex-display), Year of construction: 2024, Technical data: Slat carcass press from our showroom; Nodpfx Aaob Eln De Ijwn Working range: width from 150 - 2.550mm, height from 150 - 1.400mm; depth from 150 - 700mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 dN(kg) of the lateral pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 dN(kg) of the upper pressing bar Simple operation via 6 separate push buttons, Freely adjustable pressing time preselection with automatic opening, Charging height 300 mm Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg