Condition: used, Technical specifications: Number of pistons: 6 Piston diameter: 70 mm Heating source: built-in heating element Shelf dimensions: 1300x3000 mm Clearance: 400 mm Hydraulic pressing Safety switch Motor power: 2 kW Power supply: 400 V Duodpfxjx Idpfo Afpsn Overall dimensions: Length: 3700 mm Width: 1800 mm Height: 1850 mm

Condition: used, Technical data: Number of pistons: 8 Piston diameter: 90 mm Connection for central heating Shelf dimensions: 1300x3500 mm Clearance: 400 mm Hydraulic pressing Pneumatic side clamps Number of clamps: 9 Dodpfx Asxzdtnefpsun Safety switch Motor power: 3 kW Power supply: 380 V Overall dimensions: Length: 4200 mm Width: 1700 mm Height: 2350 mm

Condition: used, Technical data: 3 sections 6400 mm long Press sections can work together or individually Maximum dimensions of glued element: 4600x1180x200 mm in one section Hydraulic clamps 24 upper/vertical - 8 per section Movable vertical front clamps 24 - 8 per section Power supply: 400 V Motor power: 2.2 kW Overall dimensions: Dusdpjx Id Diefx Afpsn Length: 19 200 mm Width: 1200 mm Height: 2300 mm

Condition: excellent (used), Year of construction: 1962, Veneer press Year of construction 1962 60 tons pressure 15 kw heating, 380 Volt Duedpfxstyk Hye Afpsn 2500 x 1200 mm Heating plates are ok.

Condition: used, Power: 33 kW Dedow Na Uljpfx Afpeun Max. workpiece size: 2,320 x 1,010 mm Available: 2 Orma PM/AFT membrane press for coating one-sided profiled workpieces with automatic loading and unloading system.

Condition: used, OTT 300K100 Shelf Press Shelf length: 255 cm Width: 135 cm Clearance between shelves: 350 mm Shelves are in nice gold color but have a single dent of approximately 3 cm diameter Electric heating Piston diameter: 100 mm, 4 pistons Djdpfx Aeyh H Uyjfpeun Weight approximately 3.2 t Machine in stock, inspection possible

Condition: used, total width: 1,300 mm, total length: 2,600 mm, total height: 2,000 mm, overall weight: 2,800 kg, pressing force: 65 t, opening width: 300 mm, cylinder diameter: 80 mm, transport width: 1,300 mm, space requirement width: 1,300 mm, space requirement length: 2,600 mm, transport height: 2,000 mm, transport length: 2,600 mm, space requirement height: 2,000 mm, empty load weight: 2,800 kg, plate width: 1,100 mm, table width: 1,100 mm, table length: 2,200 mm, No. 04486 Veneer press Ott JU 60 Used Heating plates 2200 x 1100 mm LW Plates gold anodized, in very good condition Electric heating 2x 6 kW 4 hydraulic cylinders, diameter 80 mm each Total pressing pressure 65 tons Specific pressing pressure at full capacity 2.7 kg/cm2 Opening width 300 mm Button control for close - open - stop Circumferential emergency stop safety pull cord Transport dimensions approx. 2600 x 1300 x 2000 mm LWH Weight approx. 2800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Djdoyfw D Aopfx Afpsun Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2019, operating hours: 23,666 h, functionality: fully functional, RUF Lignum R6 briquetting press Year of manufacture: 08/2019 Operating hours: 23,000 hrs Price: 49,000.00 EURO + VAT We have 7 RUF briquetting presses for sale: Lignum R6 2019, 23,000 operating hours, net price: 49,000 euro Lignum R6 2019, 23,000 operating hours, net price: 49,000 euro Lignum R6 2019, 6,800 operating hours, net price: 59,000 euro Lignum R4 2021, 13,000 operating hours, net price: 59,000 euro Lignum R4 2021, 13,000 operating hours, net price: 59,000 euro Dujdpjx Ap Iyefx Afpen Lignum R4 2021, 12,000 operating hours, net price: 59,000 euro Lignum R4 2021, 12,000 operating hours, net price: 59,000 euro An automatic briquette packaging system is offered in a separate listing.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale: RUF briquette packaging line, built in 2017 by Koch Robotersisteme. Dusdpfx Afsx Ap Ruepsn The system can be connected to up to 9 RUF R600 briquetting machines. Packaging capacity: 4.5–5 t/h. Current price is approx. €400,000, which is 50% of the new value without briquetting presses. RUF briquetting machines are listed in a separate auction.

Condition: good (used), Year of construction: 2023, operating hours: 160 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Dsdpsgl Nlmefx Afpsun Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Year of construction: 2017, For sale: 2 units MALISZ RUF 800 briquetting presses / briquette machines – year 2017 (10/2017). Machines are in very good condition and ready to work. They were used in a woodworking production environment and are suitable for briquetting sawdust (especially hardwood sawdust). Quantity: Dsdpfsygcylox Afpeun 2 identical units available Technical data (from nameplates): • Manufacturer: MALISZ Maschinenbau (Germany) / RUF Briquetting Systems • Type / Model: RUF 800 • Year built: 10/2017 • Voltage: 400 V • Frequency: 50 Hz • Nominal current: 84 A • Protection class: IP54 • Machine numbers: 2666 and 2667 Included: • 2x briquetting press (machines only) • Full documentation available • Regularly serviced Location: Poland Price: 90,000 EUR per unit (possible to sell separately or as a set – to be discussed) Contact: please contact us by phone (preferably WhatsApp) for more details, photos or to arrange an inspection.

Condition: used, Year of construction: 2013, For sale: MALISZ RUF 400 briquetting press / briquette machine We offer for sale a MALISZ RUF 400 briquetting press, year of manufacture 08/2013. The machine is in good condition and has been used occasionally. It was working in a woodworking production environment and is suitable for briquetting hardwood sawdust. Technical data (from nameplate): • Manufacturer: MALISZ Maschinenbau (Germany) • Type: RUF 400 • Machine No.: 2131 • Year: 08/2013 • Voltage: 400 V • Frequency: 50 Hz • Current: 58 A • Protection class: IP54 Included in the offer: • Briquetting press (machine only) Dodpoygcvmefx Afpjun • Full documentation available • Regularly serviced Location: Czudec, Poland Incoterms: EXW (PL – 38-120 Czudec) according to Incoterms 2020 Price: 50,000 EUR For more details, photos or to arrange an inspection, please contact us.

Condition: excellent (used), functionality: fully functional, CATALOG NUMBER 7558 TECHNICAL DATA - Loading areas: 2 - Side clamps, manually adjustable: 2x4 pcs - Vertical pneumatic clamps: 2x4 pcs - Max length of glued elements: 3300 mm - Max height of glued elements: 1020 mm - Max thickness of glued elements: 100 mm - Dimensions (L/W/H): 4270x1600x2000 mm - Weight: approx. 800 kg ADVANTAGES – Two working zones Duodpeyarabofx Afpen – Gluing length: 3300 mm – Pneumatic cylinders – Used press, very good condition Net price: 10,900 PLN Net price: 2,600 EUR based on exchange rate 4.2 EUR (Prices may vary depending on significant fluctuations)

Condition: used, Year of construction: 2000, feed length X-axis: 10,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 125 mm, total width: 125 mm, total length: 10,500 mm, total height: 1,300 mm, The machine is in good condition without investment, it can be tested in our production. We made laminated beams, elements for windows and wooden panels. The pressing cylinders are mobile and move along vertical beams. Dodpfx Afsyhbyajpsun

Condition: new, Year of construction: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Dujdpod Nm Siefx Afpen Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: new, Year of construction: 2026, operating hours: 8 h, Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Dujdpfx Afsxfwdepjn Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Year of construction: 2011, operating hours: 637 h, Weima Briquetting Press C 140 with Automatic On/Off - Excellent Condition - Low Hours Operating Hours: 637 Immediately available - Subject to prior sale When it's gone, it's gone The compact design, high reliability, and excellent price-performance ratio are the key advantages of this machine, which is ideally suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which ensures high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Duodeyga S Sepfx Afpon Weight (kg): 530 Equipment: Press - Powerful pressing mechanism with wear-resistant, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted cover - Control panel with PLC control Hydraulics - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: - Briquette length monitoring - Automatic On/Off Location: 54634 Bitburg

Condition: like new (used), Year of construction: 2022, Log Debarker/Veneer Peeling Machine Listing Description An ideal opportunity for those looking to make a fast and powerful start in plywood production! Two main machines, which form the foundation of our line, purchased in 2022 and barely used, are being sold as a set. The machines are in as-new condition. Set contents: Dusdpfx Afsyap Ipopen Veneer Peeling Machine – Model: XQ-S01 Log Debarker – Model: ZY-S02

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Dusdpsd Nnwljfx Afpsn Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: excellent (used), Year of construction: 2010, working width: 550 mm, working length: 2,950 mm, working area 2950x550mm Dodeqfactjpfx Afpeun 10 arms pneumatic clamps arms adjustable manually

Condition: like new (used), - Shelf length: 3000mm - Shelf width: 1300mm - Clearance: 340mm - Number of pistons: 6 Dusdpevwi Rbjfx Afpjn - Piston diameter: 80mm - Oil heating - Hydraulic side pressure - Emergency stop – pull cord

Condition: excellent (used), Self-loading press for laminated wood by Steton, oil-heated Duedpfxsx Tpato Afpjn

Year of construction: 2025, condition: new, functionality: fully functional, COLUMBUS 360° - MOVE | Mobile vacuum press 1. Vacuum Press: A reliable base you can trust. The press is the technical core of the system. Built for generations: durable, robust, low-maintenance — backed by a lifetime warranty (excluding wear parts). MOVE — the high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. With extensive flexibility, due to absolute mobility and revolutionary folding mechanism, to reduce the floor space to 45 % when folded. Technology: Membrane fast-change system Gas springs for flap opening Highly elastic natural rubber membrane (up to +130 °C) Stable phenolic resin worktop (up to +120 °C), glued 15 times 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) from BECKER Duodpfx Afjyax Aispon optional, automatic switch-off when pressure is reached (with large vacuum volume) Pressure regulation 400 to 900 mbar, analog vacuum pressure gauge Connection for external vacuum bag Feet including smooth-running swivel castors FESTO pneumatics and SIEMENS electrics Technical data and dimensions: Usable area: approx. 3050 x 1350 mm Dimensions inside the frame: approx. 3130 x 1430 mm Overall dimensions: approx. 3700 x 1700 x 1100 mm Overall dimensions (folded): approx. 3700 x 770 x 1770 mm Electrical connection: 1~, 0,8/1,0 kW, 230 VAC +/- 10%, 50/60 Hz Weight: 670 2. Digital Master Manual: Expertise that builds confidence. More than a manual — it’s your daily companion. Over 50 years of concentrated experience, clearly structured and easy to apply. Ideal for both beginners and professionals. 3. Master GPT: Support that never sleeps. Whether operation, material selection, build-ups or process optimization — with AI support, you’re never on your own. Delivered with a ready-to-use tablet for instant access. Note: The number of queries allowed per day depends on your agreement with ChatGPT.

Year of construction: 2025, condition: new, COLUMBUS 360° - PIONEER Duedsyaxy Uopfx Afpen 1. Vacuum Press: A reliable base you can trust. The press is the technical core of the system. Built for generations: durable, robust, low-maintenance — backed by a lifetime warranty (excluding wear parts), a high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. 2. Digital Master Manual: Expertise that builds confidence. More than a manual — it’s your daily companion. Over 50 years of concentrated experience, clearly structured and easy to apply. Ideal for both beginners and professionals. 3. Master GPT: Support that never sleeps. Whether operation, material selection, build-ups or process optimization — with AI support, you’re never on your own. Delivered with a ready-to-use tablet for instant access. Note: The number of queries allowed per day depends on your agreement with ChatGPT. The modular design allows the machine to be adapted to current needs. Available in 3 sizes from stock.

Year of construction: 2025, condition: new, COLUMBUS 360° - PIONEER BASIC | Vacuum press | Size L 1. Vacuum Press: A reliable base you can trust. The press is the technical core of the system. Built for generations: durable, robust, low-maintenance — backed by a lifetime warranty (excluding wear parts), a high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. Technology: Membrane fast-change system Gas springs for flap opening Highly elastic natural rubber membrane (up to +130 °C) Stable phenolic resin worktop (up to +120 °C), glued 15 times 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) from BECKER optional, automatic switch-off when pressure is reached (with large vacuum volume) Pressure regulation 400 to 900 mbar, analog vacuum pressure gauge Connection for external vacuum bag Feet including smooth-running swivel castors FESTO pneumatics and SIEMENS electrics Electrical connection: 3~, 1,25 kW, 190-255/330-440 VAC, 50 Hz (3~, 1,5 kW, 190-290/330-500 VAC, 60 Hz) Dimensions: Usable area: approx. 3050 x 1350 mm Dimensions inside the frame: approx. 3130 x 1430 mm Max. workpiece height: approx. 600 mm Overall dimensions: approx. 3700 x 1640 x 1080 mm Weight: approx. 680 kg Dusdpfxjyaxybo Afpen 2. Digital Master Manual: Expertise that builds confidence. More than a manual — it’s your daily companion. Over 50 years of concentrated experience, clearly structured and easy to apply. Ideal for both beginners and professionals. 3. Master GPT: Support that never sleeps. Whether operation, material selection, build-ups or process optimization — with AI support, you’re never on your own. Delivered with a ready-to-use tablet for instant access. Note: The number of queries allowed per day depends on your agreement with ChatGPT.