Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front Hfedpfx Ageyuzcuewod - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2014, sheet width 3140 mm plate thickness 6.5 mm ST thickness at "Niro-steel" 4.0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable max. 800 mm Control M 15 S total power requirement 7.5 kW weight of the machine ca. 6350 kg dimensions of the machine ca. 4350 x 2250 x 1900 mm current new price approx. 60.000 euros special price on request Description : Hfedpfoyuzcnox Agwjd - robust folding machine - high precision for wide bending processes - increased rigidity in design - hydraulic drive - with rack and pinion for better control and accuracy - compared to normal hydraulic systems * Easy adjustment of material thickness * Adjustable hydraulic pressure * to adjust the thickness of the material * This prevents damage to the surface of the materials - Smallest return bend 25 mm Equipment: - Program control "M 15 S" with LED display * for bending angle adjustment - Manual backgauge 0 - 800 mm - Manual lower beam adjustment - Light barrier front and rear - 1x freely movable triple foot switch - 2x forklift pockets for easy transportation - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2007, pressure 30.0 t chamfer lenght 800 mm back stop - adjustable max. 420 mm stroke of upper beam 100 mm dayligth 310 mm working feed 10.0 mm/sec return speed 12.0 mm/sec Control VISION 120 oil volume ca. 38.0 l voltage 380 V total power requirement 4.5 kW weight of the machine ca. 890 kg dimensions of the machine ca. 1250 x 950 x 1900 mm current new price approx. 24.000 euros special price on request Hfjdpfsyuzchsx Agwsd Equipment: - electro-hydraulic NC press brake - easy to operate - UNITRONICS "VISION 120" NC control system * for press depth back gauge (Y X axis) - NC electro-motorized back gauge (X axis) * Input of target/actual value possible * 2x manually adjustable stop fingers - Operation front right - Many different insert/bending tools * Top tool holder : AMADA/PROMECAM - 1x freely movable foot switch - EMERGENCY OFF button at the front - Rear safety device - operating instructions

Condition: ready for operation (used), sheet width 1540 mm plate thickness 5.0 mm pre-bending 5.5 mm diameter of upper rolls 150 mm voltage 400 V total power requirement 4.0 kW weight of the machine ca. 1630 kg range L-W-H 2520 x 890 x 1070 mm Features: - Robust electric three-roll bending machine - Drive via spur gear brake motor + reduction gear - Asymmetrical roll arrangement - Electric adjustment of the rear roll * with automatic/electric shut-off Hfjdeyuzcbepfx Agwed * Minimum/maximum travel adjustment possible - Rotating control panel - Swiveling upper roll - Conical bends achieved by tilting the lower and rear rolls - 1x freely movable double foot switch * Reversible roll rotation - Manual adjustment of the lower roll via handwheel - With analog position indicator - Electric safety device (cable) - Original operating instructions

Condition: used, Year of construction: 2012, operating hours: 8,600 h, functionality: fully functional, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness copper (max.): 5 mm, For sale: Combined sheet metal and tube laser cutter BLM ADIGE-SYS LT COMBO. This machine is designed for both sheet, tube, and profile cutting in a single system – an ideal solution for versatile and flexible production. The machine is connected and fully operational; it can be inspected and observed working in real time. Single owner. Full service history available, the machine has been regularly maintained with annual servicing. Manufacturer: BLM Group Model: ADIGE-SYS LT COMBO Year of manufacture: 2012 Technology: Fiber laser Source: 3 kW LT Combo Tube and profile cutting diameter: 16 – 225 mm Tube input length: 6.1 m; output length: 6.1 m Hedpfxsyaavde Agwofd Cuts to zero – leaves no remnants Sheet table: 1500 x 3000 mm Cutting capacity: ALU 10 mm; Stainless Steel 12 mm; Brass 5 mm; Steel 20 mm Laser cutting hours: 8,600 h (as of 2026-02-27) Total machine hours: 72,000 h (as of 2026-02-27) Other: spare laser cutting head included If you have any further questions, we would be happy to assist you.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum sheet thickness (stainless steel) 1.5 mm Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Maximum height of bending on four sides max * 203 mm Bending blade action radius 180 degrees Machine width approx. 5500 mm Machine length approx. 7000 mm Machine height 2500 mm Total weight 23000 kg Power 25 kW Frequency 50 Hz Hedpfx Aerwxkhsgwjfd Pressure 6 bar Loading system Blank Feeder with portal

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: 1948, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ECS, controller model: 904UNO, working width: 6,200 mm, WORKING LENGTH: 6200 mm Hfsdpfx Asyt If Tegwed WORKING THICKNESS: 1.5 mm (400 N/mm²) HYDRAULIC SHEAR AUTOMATIC CNC ECS YEAR 2010

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 81500 € 1540.35 € 8 mm 5 mm 80 mm 10 mm Hodpfxjyq Svke Agwsfd 4500 mm 720 mm 95 (R 80) / 35 (R 25) mm 11 kW 4900 mm 1700 mm 2700 mm 4550 kg incl. flanging rolls for mild steel (R25) incl. cutting blade top and lower roll driven by hydromotor and plantary gear box possible to flange both, flat and crowned bottoms hydraulically adjustable bottom height cutting and flanging on the same head lateral support rolls operator panel with touch screen Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 788 € 3/4" 26,9 mm, 1" 33,7 mm, mm 3 mm 2.5 mm 8 kg The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1") and 42.4 mm (1 1/4"). The hand-operated machines can be easily wall h ALMI pipe notchers filing or milling pipes has become a thing of the past. The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. Hfedpfx Aoyq Svdsgwjd All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu Hodpfxeyq Su Tj Agwofd ca. 2 - 4 Wochen ab Auftr Niederlande 1032 € 1 1/4" 42,4, 1 1/2" 48,3 mm 3 mm 2.5 mm 15 kg The AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 951 € Hedpfx Agjyq Su Howofd 1 1/2" 48,3 mm, 2" 60,3 m mm 3 mm 2.5 mm 15 kg The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2") and 60.3 mm (2"). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 19600 € Hedpfx Aeyq Suajgwefd 376.32 € 5 mm 2000 mm 250 mm 3000 mm 750 mm 1400 mm 1350 kg Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Inside cutting system Throat depth: 1200 mm According to EC safety regulations Operating manual OPTIONAL EQUIPMENT: 1 spare blade set Flanging attachment with 1 set rolls

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 48000 € 916.8 € 6 mm 4 mm 70 mm 4000 mm 550 mm 8.75 kW 4250 mm 720 mm 2000 mm 2015 kg Easy operation with mobile control panel with push buttons Built according to EC Safety Directives and has CE Mark One set of flanging rolls included. Radius can be selected. One set of cutting blades included Min. cutting diameter: 600 mm (with adapter for small diameter 400 mm) Min. flanging diameter: 550 mm (with adapter for small diameter 350 mm) Rotating speed 70 rpm with adjustable max. torque Hodpfjyq Spwex Agwofd Top and bottom flanging rolls powered in rotation with planetary reducers Hydraulically adjustable bottom head for both, flat and crowned dish flanging Both cutting and flanging operation on the same head Users Manual Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 12800 € 245.76 € 3.5 mm 750 mm 2.2 kW 6,1 m/min 2000 mm 600 mm 1400 mm 750 kg 200/1200 mm Rahmen aus geschweißter Stahlkonstruktion Klingen aus Spezialstahl Lange Lebensdauer der Messer dank der konisch gelagerten Wellen Getriebemotor mit Bremse System zur Einstellung des Schnittdurchmessers mit motorisierter Leistung Mobiles Steuerpult System zum Schneiden des Innendurchmessers Ausrüstung gemäß CE Regulierungen Hsdjyq Sn Hopfx Agwofd

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande Hfedpeyq Snysfx Agwsd 853 € 20 - 76,1 mm 3 mm 2.5 mm 7 kg The ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm. Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment. ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available.

Condition: new, neu Hfedpfx Ajyq Sntogwsd ca. 12 Wochen ab Auftrags Türkei 6900 € 133.17 € 2 mm 700 mm 1.1 kW 7,5 m/min 1400 mm 400 mm 1150 mm 360 kg 120 / 1.000 mm 280 mm gearbox motor with brake footpedal central lubrication OPTIONAL EQUIPMENT: pneumatic upper roll feed

Condition: new, Year of construction: 2025, neu 2025 020177 prompt, Zwischenverkauf v Türkei 880 € 1 50 kg 0,05 to 30 mm Hjdjyq Snaspfx Agwsfd 700 mm 100 mm 80 mm Without drive, idling rollers Manual adjustment of the centre distance

Condition: used, ca. 12 - 14 Wochen ab Auf Türkei 20000 € 5 mm 1200 mm 4,1 m/min 3000 mm 750 mm 1400 mm 1350 kg 250 / 2000 mm 300 mm Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Inside cutting system According to EC safety regulations Operating manual Optional equipment: 1 spare blade set € 1.200,00 Hjdpeyq Smvofx Agwsfd Flanging attachment with 1 set rolls € 2.000,00

Condition: ready for operation (used), Year of construction: 2001, Main Drive Number of axis 5 Additional Equipment Top drive concept in two-cylinder design y1/y2 Electro-hydraulic ram drive with proportional valve technology Ram travel measuring system with spring deflection compensation via glass scales Modern block hydraulics Cnc backgauge system Hedpox D Nkdofx Agwofd Safe finger adjustment from the front Self-centring, manual, hardened upper tool holder for vertical tool change Hardened, manual lower tool holder Programme-controlled lower tool displacement (i-axis) for 2 positions Modern protective cover This 5-axis TRUMPF TrumaBend V85 press brake was manufactured in 2001. It features an electro-hydraulic ram drive, CNC backgauge system, and a modern protective cover. The machine includes a 4-axis back gauge system and both hydraulic upper and lower tool clamping. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85 machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: excellent (used), Year of construction: 1987, Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Peddinghaus, hydraulic profile steel shear type Peddiworker 400 -Drive: hydraulic -Pressure force: 40 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, pipe notching -Dimensions: 870/660/H1630 mm Hjdpjyupxwofx Agwefd -Weight: 860 kg

Year of construction: 2003, condition: ready for operation (used), - USED - 7-AXIS SYNCHRONIZED CNC PRESS BRAKE    AXIS: Y1 - Y2 - X1 - X2 - R - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 130 ton UPPER BEAM TRAVEL: 400 mm APPROACH SPEED: 150 mm/sec Hfsdpfx Ageyry Svewod RETURN SPEED: 150 mm/sec WORKING SPEED: 1-10 mm/sec MOTOR POWER: 18,5 kW WEIGHT: 14200 Kg OVERALL DIMENSIONS: 4435 x 2734 x 3095 mm NOTE: INTERNAL AND EXTERNAL POSITIONERS

Condition: used, Year of construction: 1989, total length: 3,500 mm, total width: 1,930 mm, total height: 2,300 mm, Weight: 6.580 kg Price: On request Hedpfx Ageyuy Dwswsfd - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: P90721 - Transport dimensions: 3500mm x 1930mm x 2300mm (l x w x h) - Transport weight [kg]: 6580kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: sinumerik 840d, _____ Description: Year of manuf. : 2020 Accuracy : 0,015 mm Hfjdsyr Uiijpfx Agwjd Technical specifications Axis travel range:X 800 mm, Y 600 mm, Z 400 mm Workpiece machining:CutLine Professional 2D Machining:2D Cutting head camera:available Dimensions:3300 x 1600 x 2200 Axis speed:50 m/min Max. axis acceleration:10m/s² Positioning accuracy:0.015mm Equipment :-Variable clamping system :-Teach panel :-TruDisk 3000 :-Cutting optics adjustment device :-Automation interface

Condition: used, Year of construction: 2019, gebraucht 2019 080173 Hfodoyfh N Aopfx Agwod prompt, Zwischenverkauf v Türkei 39800 € 1 120 to 3050 mm 3 180 mm 2550 mm 250 mm 375 mm hydraulisch 100 mm/s 9 mm/s 77 mm/s 620 mm 250 mm/s 878 mm 104 mm 150 l 11 kW 3750 mm 1250 mm 2400 mm 5900 kg Excellent condition Only approximately 600 operating hours and 2000 strokes 3 axes (Y1, Y2 and X axes) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles Manual, centralized adjustable crowning table intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam 2 sheet support arms protection covers on the sides andback side according to CE rules oilfilling users manual in GERMAN with EC declaration of conformity

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 134000 € 2532.6 € Hjdsypbquepfx Agwofd 3100 mm 25 mm 25 mm 20 mm 20 mm 20 mm 16 mm 360 mm 360 mm 270 mm 60 mm 1510 mm 22 kW 5560 mm 2060 mm 2050 mm 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity