Condition: new, Year of construction: 2026, neu 2026 080147 Jänner 2026, Zwischenverk Slowakei 26400 € Gsdswiqnqopfx Ah Douk 504.24 € 40 to 1500 mm X und Y Achse 100 mm 310 mm hydraulisch 38 l 6 kW 2000 mm 950 mm 1900 mm 1800 kg 420 mm 1 10 mm/s 12 mm/s 40 mm/s 0.02 +/- mm 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German

Condition: ready for operation (used), Press Brake, ESPE CTO 80, Used Machine Manufacturer: ESPE Model: CTO 80 Pressing force: 80 tons Bending length: 2500 x 3 mm Table dimensions: 2500 x 160 mm Main motor power: 10 kW Guedpfxjwfrkfj Ah Dsk Weight: 6100 kg

Condition: like new (used), Year of construction: 1992, conveyor belt thickness: 5 mm, coil weight: 15,000 kg, conveyor belt width: 1,520 mm, sheet thickness steel (max.): 3 mm, coil width: 1,500 mm, 1992 Guida Stainless Steel Cut to Length Line • Coil Weight: 15 tonnes • Coil Width: 500 – 1500mm • Cut Length: 350 – 6000mm • Thickness: 0.40 – 3.0mm • Coil I/D: 508/610mm • Max Coil O/D: 1500mm Gsdpowbrv Tofx Ah Dsuk • Line Speed: Max 40m/min • Length Tolerance: EN9445 • Coating Facility: Yes • Operating System: Siemens S7-300 • Line Comprises: Coil Car; Expanding Mandrel; Decoiler with snubber roll; Pinch Rolls; 23 Roll Leveller (11/12); Flying Shear; Runout Table; Twin Stacking Units. • Electrical Revamp: 2007 There are 2 sets of spare straightening shafts.

Condition: new, sheet thickness: max. 30 (bei 280 MPa) / max. 22 (bei 360 MPa)total power requirements: 124weight approx.: 54000messurements (LxWxH): 8000 x 2300 x 4700CAPACITYMax. thickness (280 MPa) mm 30 Max. thickness (360 MPa) mm 22 Max. flat plate diameter mm 7000 Min. flanging diameter (ØD) mm 1700 Min. flanging diameter (with additional manual   device) (ØD) mm 1200 Flanging (knuckle) radius (r) mm 120-850 Max. head height (H) mm 1535 Max. torispherical head diameter (ØD) mm 6000 Max. elliptical head diameter (ØD) mm 5500 Total power kW 124 SIZELength mm 8000 Width mm 2300 Height mm 4700 Weight (Approx.) Ton 54    QUOTATION SCOPE OF SUPPLY & PRICING Gjdpfx Ahox Dfmho Douk FMB 30x7000 FLANGING MACHINE Special steel and heat treated (one) knuckle roll – R100 mm Special steel and heat treated (one) flanging roll Hydraulic bottom support rollers adjustable in height Manual centralized auto-lubrication Control panel placed on the body Hydraulic (air) oil cooler Variable speed of rotation Automatic flanging feature (called CNC/NC by other manufacturers) Lightning for flanging area Telescopic and stainless protection cover sheet for bottom head holder channel Top and bottom head holders driven by hydro-motors Rear lifting cylinder Roll changing device

Condition: ready for operation (used), Year of construction: 2016, operating hours: 11,070 h, General Data Machine weight 12000 kg Measurements height 2565 mm Dimensions Machine Length 11000 mm Godpfx Ahex Hbk Ds Deuk Main Drive Number of axis 3 This 3-axis Bystronic BySprint Fiber 3015 was manufactured in 2016, designed for precision fiber laser cutting. It handles a nominal sheet size of 3000 x 1500 mm and supports a maximum workpiece weight of 890 kg. The machine dimensions are 11,000 mm in length, 6,050 mm in width, and 2,565 mm in height. If you are looking to get high-quality cutting capabilities consider the Bystronic BySprint Fiber 3015 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: used, Swing Bending Machine RAS Type 64.25 Serial No. 112/10 Year of manufacture: 1987 Working length: 2540 mm Max. sheet thickness: 2.5 mm at 400 N/mm² Upper beam stroke: 210 mm Adjustable bending beam: 30 mm Back gauge: 6 to 1550 mm Compressed air requirement: 5 bar Back gauge motor power: 0.38 kW Upper beam adjustment motor power: 1.1 kW Bending beam motor power: 1.5 kW Power supply: 400 Volt, 50 Hz Gusdox Hkfdspfx Ah Dek - One-piece sharp rail 135° - Bending angle and back gauge controlled via RAS control, Type Multibend 2000 - Back gauge (travel 500 mm) - Back gauge with pneumatically actuated fingers at 500 / 1000 mm, fixed stop fingers at 1500 mm - Electric foot switches - Bending beam drive via geared motor and gear drive - Electrical schematic available Space requirement (L x W x H): 3330 x 1850 x 1300 mm Weight: 2000 kg Good condition

Condition: good (used), functionality: fully functional, Year of construction: 1999, Hydraulic Press Brake Make: TRUMPF Model: TrumaBend V170 Year: 1999 Technical Data Manufacturer: TRUMPF Model: TrumaBend V170 Godpfx Ahsx E Tpis Dsuk Year of manufacture: 1999 Operating hours: 45,074 h (read-off) Press force: 170 t Usable length: 4000 mm Stroke: 215 mm Dimensions: L 4.6 x W 2.70 (without bending aids 2.20 m) x H 2.70 m (transport height 2.5 m) Weight: approx. 16.5 t Equipment • Delem DA 2D graphic CNC controller • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Pneumatic die shifting • Hydraulic tool clamping top and bottom (Wila/Trumpf system) • CNC-controlled crowning • 2 movable bending aids • Prepared for ACB angle measurement • Upper tool, OW210/S 28°/R1, H 140mm, L = 4000mm, segmented • Lower tool, EV002W8 30°/R1, H 100mm, L = 4000mm, segmented All details without guarantee. A demonstration can be arranged at any time in our showroom.

Condition: used, Year of construction: 1980, outer diameter: 38 mm, pipe diameter (max.): 38 mm, PRODUCT (PROFILE, TUBE) .. external diameter min.: 11 mm .. external diameter max.: 38 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 2 mm LINE CHARACTERISTICS .. welding process: HF inductive .. sawing process: travelling .. speed max.: 120 m/min ELECTRICAL SPECIFICATIONS Gedpfxjx Hd Thj Ah Djuk .. mains power supply: 440 kVA For sale is a fully serviced and excellently maintained tube welding line . The line was previously used for the production of USM Haller furniture tubes, but it is designed for a wide range of tube diameters, making it highly versatile for different manufacturing requirements. Welding is carried out with an induction HF system from EFD Induction, built in 2018, ensuring a modern and efficient welding process. Total line length: approx. 100 m Operation: handled by 7 operators Condition: well-maintained, fully operational Scope of delivery: complete package An excellent opportunity for companies looking for a reliable and high-performance tube welding line.

Condition: excellent (used), Stainless Steel Cut to Length Line • Coil Weight: 2 tonnes • Coil Width: 100 – 500mm • Cut Length: 150 – 500mm • Thickness: 0.30 – 1.0mm Guodpfxewbzbxj Ah Dok • Max Coil O/D: 500mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 44,500 h, laser source model: CV5000, TECHNICAL DETAILS Laser: CV5000 MACHINE DETAILS Operating hours: 44,500 h Guodpfx Ajx Hfcqjh Djk Note: Information regarding the machine's layout can be found in the attached document.

Year of construction: 2024, operating hours: 150 h, condition: ready for operation (used), This Crippa BASIC 42.1 was manufactured in 2024. It is a robust tube bending machine capable of handling steel tubes up to 40x1.5 mm and aluminum, copper, or other tubes up to 42x2.5 mm. It features a maximum bending radius of 170 mm and can accommodate tube lengths up to 4650 mm. Consider the opportunity to buy this Crippa BASIC 42.1 tube bending machine. Contact us for more information about this machine. Application Types Guedpfx Ahox D Nfhs Djk Other Sheet Metal Machinery

Condition: good (used), Profile steel shear, profile shear, punch, punching machine, hole punch Guedscc Ubuopfx Ah Dek -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Condition: good (used), functionality: fully functional, Year of construction: 1996, working width: 1,020 mm, sheet thickness steel (max.): 20 mm, overall weight: 11,000 kg, Hydraulic guillotine shear, guillotine for cutting thick steel plates. Manufacturer - COLLY F France; Model - CGH 2010; Year of manufacture - 1996; Blade length - 1020 mm; Cutting thickness - 20 mm; Number of knife cycles per minute - 7; Gedpfox Hrrlox Ah Djuk Electric back gauge with Elgo programmer; Photoelectric safety barrier; Motor power - 30 kW; Base dimensions - 156 x 190 cm; Height - 210 cm; Weight - 11,000 kg; CE - yes. Machine connected, ready for inspection.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,400 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: TRUMPF, controller model: TASC 6000, bending force (max.): 230 t, working width: 3,230 mm, stroke length: 445 mm, throat depth: 420 mm, distance between stands: 2,690 mm, installation height: 615 mm, operating speed: 10 mm/s, number of axes: 6, type of crowning: CNC-controlled, oil tank capacity: 330 l, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge: 860 mm, overall weight: 16,000 kg, total length: 4,270 mm, total width: 2,120 mm, total height: 3,200 mm, number of support arms: 2, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, + 2 quick-adjustable support consoles on linear guides + 6-axis backgauge system (X1, X2, R1, R2, Z1, Z2) with control cabinet air conditioning + Hydraulic and hardened upper tool clamping + CNC-controlled crowning + Preparation for ACB + BendGuard safety device for 200 mm/s Standard equipment: - Four-cylinder upper drive concept - Electrohydraulic ram drive with proportional valve technology - Ram travel measurement system - Modern block hydraulics Gjdpfx Ahex Elxvj Dsuk - Electronic pressure scale - Spherical suspension and inclination of the pressure beam - CNC backgauge system - Safe forward finger adjustment - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, hydraulic lower tool holder - Flat front cover - Modern safety guard - CE mark - Oil cooler - Control cabinet cooling (air-air) - Operating manual

Condition: excellent (used), Year of construction: 1962, operating hours: 74,617 h, UNGERAR BOY KESME Gjdpfx Ahsxf A Sws Dsuk

Condition: as good as new (ex-display), The KMT M 1303 Guillotine Shear from KNUTH is engineered for precise and reliable cutting, making it an essential tool in the Sheet Metal Processing category. Featuring a robust solid steel construction, this modern plate shear is equipped with a powerful drive motor that allows for efficient operation. With its straight cutter angle, it minimizes workpiece torsion during cutting while providing a high-precision manually adjustable back gauge for exact positioning. The dual-sided reversible upper cutters and four-edge lower cutters enhance the lifespan and versatility of the machine. Ergonomically designed, the bright LED illumination of the cut line and a clear view from above ensure accurate alignment. A mobile foot switch offers operators the flexibility to manage the workpiece safely, while essential features such as a cut counter and accessible lubrication points promote efficient maintenance. This reliable and powerful Guillotine Shear is perfect for your workshop needs—request a quote today to enhance your Sheet Metal Processing capabilities with the KMT M 1303. Gujdpfxoww Uaae Ah Dek

Year of construction: 2016, condition: ready for operation (used), General Data Machine weight 10500 kg Movement Y-Axis Movement 400 mm Gsdpsx D Hvkofx Ah Djuk This Warcom DINAMICA 100.30 press brake was manufactured in 2016. It features a maximum force of 100 Ton, a working length of 3200 mm, and a motor power of 11 kW. Weighing 10,500 kg, it operates with a maximum working pressure of 250 bar. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 100.30 machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: good (used), Notching tool, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch stamp -Release tool: pneumatic -Notch: 18 x 9 mm Godpfx Aefmv Naoh Deuk -Dimensions: 180/200/H270 mm -Weight: 4.8 kg

Condition: ready for operation (used), Fröhling Stainless Steel Cut to Slitting Line Technical Data: Material: Stainless Cr Ni and Cr steel strips The slitting knife spacers worth 70,000 euros will be included with the machine as a complimentary gift. Coil Width: 12 – 500mm Cut Length: Free cutting Thickness: 0.30 – 2.5 mm Tensile strength: Max. 80 kp/mm² Elongation: Max. 50% at 80 kp/mm² Strip thickness: 0.2 – 2.5 mm Raw strip width: Max. 500 mm Number of cuts: 12 and more, 9 cuts at 2.5 mm thickness 12 and more at 0.2 – 2.0 mm thickness Line speed: 0–75 m/min for strip thickness 0.2 – 2.5 mm 0–150 m/min for strip thickness 0.2 – 1.0 mm Feeding speed: 15 m/min Coil weight: Max. 4500 kp Line direction: From left to right (viewed from operator side) Gedpfx Ahowbt Iqj Douk The slitting knife spacers worth 70,000 euros will be included with the machine as a complimentary gift. Blade List Size Quantity 5 mm 33 6 mm 32 7 mm 59 7.70 mm 10 8 mm 330 5,4 mm 15 6 mm 20 7 mm 20 8 mm 20 10 mm 24 15 mm 20 20 mm 20 1 mm 20 1,05 mm 20 1,1 mm 20 1,15 mm 20 2 mm 20 3 mm 20 4 mm 15 5 mm 15 5,15 mm 15 5,2 mm 15 5,3 mm 15

Condition: used, The PRS 76 is a top-tier Tube End Finishing Machine designed specifically for efficient tube and profile processing. This advanced machine features a powerful 3 kW motor that allows it to grind various materials effortlessly. With its innovative rotating design, the PRS 76 enables you to grind at any angle between 30° and 90°, accommodating diameters from Ø 20 mm to Ø 76 mm. It comes equipped with two K36 grinding belts, measuring 100 x 2000 mm, ensuring you have everything needed for optimal performance. Ideal for both tubes and profiles, the PRS 76 stands out for its ease of use and versatility. Enhance your workshop's capabilities with this robust machine. You can request a quote today to learn more about the PRS 76 and discover how it fits into your tube end finishing requirements. Gjdpeuxdb Uofx Ah Douk

Year of construction: 2020, condition: ready for operation (used), This TRUMPF Trubend 5130 press brake was manufactured in 2020. It includes a comprehensive set of tooling valued at €30,000 and programming software with a license transferable from Trumpf. Features include a CNC BendMaster, extended Y-axis stroke, 4-axis backgauge, and air-conditioned electrical cabinet. Ideal for precision bending with low operational hours. Contact us for more information about this machine. Application Types Bending Guodpfxsx D Hv Rs Ah Dok

Year of construction: 2009, condition: ready for operation (used), General Data Measurements width 1430 mm Measurements depth 2800 mm Measurements height 2470 mm Machine weight 5200 kg This IMAC FL 80-2500 press brake was manufactured in 2009. It features a maximum force of 800 kN and a table width of 2500 mm. The distance between uprights is 1990 mm, and it has a throat depth of 280 mm. With a motor power of 7.5 kW and a weight of 5200 kg, consider the opportunity to buy this IMAC FL 80-2500 press brake. Contact us for more information. Godpjx D Nfzjfx Ah Dsuk Application Types Bending

Year of construction: 2001, condition: ready for operation (used), Main Drive Laser power 2500 w Number of axis 3 Movement X-Axis Movement 3000 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 1500 mm Gusdox D Rpnspfx Ah Djk Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 150 mm Z-Axis Rapid Traverse 20 m/min Main Drive Laser power 2500 w Number of axis 3 Movement X-Axis Movement 3000 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 1500 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 150 mm Z-Axis Rapid Traverse 20 m/min This 3-axis Prima Industrie Platino 1530 PL 9000 was manufactured in 2001. It features a CO2 laser cutting machine with X-axis travel of 3000 mm, Y-axis travel of 1500 mm, and Z-axis travel of 150 mm. Maximum linear speeds reach up to 40 m/min on the X and Y axes, and 20 m/min on the Z-axis. If you are looking to get high-quality cutting capabilities, consider the Prima Industrie Platino 1530 PL 9000 machine we have for sale. Contact us for more information. Application Types Cutting

Year of construction: 2014, condition: ready for operation (used), This TRUMPF TRUBEND CELL 7000 was manufactured in 2014. It's a high-speed automatic bending system, ideal for small to medium-sized sheet metal parts. Features include a press brake, robotic handling, and an integrated feeding system. The machine is in excellent condition, comes with a large set of bending tools, and is ready for loading. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 7000 machine we have for sale. Contact us for more information. Application Types Bending Gsdpfxsx D Hype Ah Deuk

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 21000 kg Table Table load 160 kg Guodpfx Ajx Enlxoh Dok Main Drive Number of axis 2 Movement X-Axis Movement 2500 mm Y-Axis Movement 1525 mm This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. Application Types Punching