Condition: ready for operation (used), Year of construction: 1990, Euromac 220/6S Notching Machine • Model: Euromac 220/6S • Year of Manufacture: 1990 • Condition: Used The Euromac 220/6S is a proven notching machine characterized by its robustness and versatility. Machines from the 1990s are robustly built and have proven themselves in many production environments. Areas of Application: • Sheet metal processing: Notching holes, contours, and other shapes in sheet metal Fgslnowfdhvs Hca Eob • Profile processing: Machining profiles and tubes • Special Applications: Customized solutions for specific requirements

Condition: good (used), Year of construction: 1986, Machine type: Container welding and turning device Manufacturer: GIESEKING Model: SG2 S0 Year of manufacture: 1986 Condition: Good Type of offer: Used machine Fsln Hcov Uzhtsa Eegb Technical specifications: Load capacity: 3000 kg Drive type: 400 V Note: Circumferential speed continuously variable 20-110 cm/min., max. center distance 1250 mm The machine is in good, ready-to-use condition and can be inspected and demonstrated at our premises. We would be pleased if you are interested in our offer. Subject to errors, changes, and prior sale.

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 - compl. with standard roller set, - digital readout for left and right axis - hydraulic side guides - three smooth driven rollers - planetary movement of bending rolls - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm Fjlsd A Nb Hsn Hca Eegb -shaft diameter 110 mm -Rolls diameter 350 mm -working speed 5 m/min -installed power 7,5 kw -weight 2950 kg -module max Wcm3 157 -400 Volt 50 Hz. 3 ph.

Condition: like new (used), Functionality: fully functional, machine/vehicle number: 8529 041, Fasti 209-1020x4 Folding Machine Upper beam stroke: 350 mm Weight: 1150 kg UW adjustability: 80 mm Bending capacity: 4 mm at 400 N/mm² tensile strength 1x lower reinforcement rail for bends with maximum sheet capacity 33 x 75 x 1020 mm, milled, ground Material: 1.2312 Purchased new in 2024, undamaged 1x SA45 pointed rail, upper for bends up to 135° Length 1020 mm, milled, ground Material: 1.2312 Purchased new in 2024, undamaged 1x lower flat rail 75 x 15, length 1020 mm Good condition 1x SB20 pointed rail Fgoljv Ni Tyjn Hca Ejb 20°, length 1020 Reground in 2024 No damage Includes paper and digital operating instructions Note: The protractor and 90° angles are not included in the sale. Conclusion: This Fasti bending machine is in very good condition, the bending rails are new and undamaged, allowing you to produce flawless and highly precise bent parts with this machine – an opportunity for many users. Normally, we wouldn't sell this machine, but because the need arose, we purchased a new, larger Trumpf press brake.

Condition: new, Year of construction: 2025, pressing force: 100 t, overall weight: 9,000 kg, 2 in 1 = Press Brake + Shear bending length 3040 mm, Press capacity 100 to, Felsd Hn Tasn Hca Eegb Shear capacity L = 3200 mm x 6 mm, throat 200 mm, working high 640 / 1240 mm, Control CYBELE CybTouch 15, mot. gauge 700 mm, shadow cutting line, motor 10 KW dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine available L = 2000 mm und L = 1400 mm

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, load capacity: 2,500 kg, Dumeta CHGK-5-NDPU roller stand Load capacity 2500 kg This was a bad investment and has hardly been used, making it in mint condition. Fgjlnewffxij Hca Ejb This system is available for immediate delivery.

Condition: ready for operation (used), Year of construction: 1985, Functionality: fully functional, machine/vehicle number: 85295 057, sheet thickness steel (max.): 3 mm, sheet thickness (max.): 3 mm, working width: 1,620 mm, FASTI Folding Machine • Manufacturer: FASTI-Werk, Carl Aug. Fastenrath GmbH & Co. KG Fjlswfdg Esn Hca Eogb • Model: 2095-16-3 • Year of manufacture: 1985 • Type: Mechanical folding machine • Maximum sheet thickness: 1620 x 3 mm • Condition: Used Areas of application: • Bending of sheet metal using a movable punch and a fixed anvil

Condition: good (used), Year of construction: 1985, Machine type: Container welding and turning device Manufacturer: GIESEKING Model: SG1 Year of manufacture: 1985 Condition: Good Fgelsv Uzckjn Hca Esb Type of offer: Used machine Technical specifications: Load capacity: 1500 kg Drive type: 400 V Remarks: Circumferential speed continuously variable 20-106 cm/min., max. center distance 1000 mm The machine is in good, ready-to-use condition and can be inspected and demonstrated at our premises. We would be pleased if you are interested in our offer. Errors, changes, and prior sale excepted.

Condition: new, Year of construction: 2023, tube bender R2 ZOPF - without bending tooling - with foot pedal and emergency stop Foln Hcsdkxkxsa Eegb - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 400 V 50 Hz 3 ph. - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 60 mm - max. Bending angle of 210 °

Condition: excellent (used), Functionality: fully functional, sheet thickness steel (max.): 3 mm, sheet thickness (max.): 3 mm, outer diameter: 80 mm, HEAVY-DUTY HIGH-PERFORMANCE TUBE MILL OTO 80.3 QTC With complete Quick Tool Change System Made by OTO MILLS PRODUCTION RANGE • Diameter range 19mm – 80mm • Thickness 0.8mm to 3.2mm • Speed Max. 150 m/min • Working direction Left - Right Scope of supply: 1. Entry Line made OTO MILLS with: • Double Uncoiler OTOAD256 -PA • Double strip peeler for opening from top/bottom • Automatic strip joiner OTO GG254 • Floop vertical accumulator 2. OTO 80.3 QTC tube mill made OTO MILLS with: • Casted Iron stand • Bottom shaft height adjustable • Reinforced motor and gearboxes 2-speed transmission • Hydraulic nuts • Double length cooling tunnel • Motorised turk-head for fast adjustment 3. Quick change rafted system OTO QTC - 2nd set of cassettes off-line including : • 1 complete cassette for forming • 1 complete cassette for fin-pass • 1 complete cassette for sizing • Quick – plug automatic cardan connections 4. 150 m/min Flying saw – High Speed cold saw OTO TCCG160 with : • Carriage motion with 70kW motor • Cutting head motion with hydraulic control • AC Rotation of the blade 5. Automatic packer MAIR SQ.HEX.90.D.5.SL with emulsion draining and bundle weighting system • Possibility to make hexagonal and square/rectangular bundles • 5 modules for production of tubes 4-10m (12m for thickness >1.8mm) • Including emulsion draining, and weighting unit • 3 chains for finished bundle storage • Test tube zone, with cutting saw for the test tube 6. Automatic strapping unit SIGNODE M400 7. Zinc spraying METALISATION 250 • 1 metallisation cabin • 1 zinc spraying unit METALLISATION ENERGIZER 250 • 1 Zinc spraying gun ARCSRPAY 528E 8. Fume exhaust system • Fume exhaust conducts and exhaust covers on the required points a • Filter for fumes 9. Complete set of rolls (*See details) Fgjln Hovr Tntjca Esb NEW PARTS SUPPLIED IN 2023/2024: 10. Thermatool CFI 350-VF Solid state welder with : • Automatch • Selectable frequency 250-400kHz • Thermaview control panel 11. Cooler PARKER, Model hyprechill Maxi 12. Inner scarfing hydraulical Blissenbach, with all the toolding for ID 30-50m 13. OPTRONIC CNC control unit for driving flying saw (Switzerland) 14. New Emulsion plant with : • Pump and heat exchanger • Fillters • Electrical controls and monitoring 15. New motor and electritical cabinet for accumulator 16. New motor and control for sizing section

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, back gauge: 1,000 mm, sheet thickness (max.): 12 mm, working length: 4,100 mm, TECHNICAL DETAILS Sheet length: 4,100 mm Sheet thickness: 12 mm Backgauge: 1,000 mm Sidegauge: 1,500 mm with scale, T-slot, and tilting cam Sheet support arms: 2 x 1,000 mm, with T-slot Total power requirement: 30 kW Control and drive Control: ELGO (for backgauge) Backgauge drive: Motorized, on recirculating ball screws, foldable Knives Lower blade: 4-way reversible Upper blade: 2-way reversible MACHINE DETAILS Dimensions (L × W × H): 5,350 × 2,250 × 2,250 mm Weight: approx. 16,300 kg EQUIPMENT - Swing-cut design - Clearly arranged control panel mounted on a swivel arm - Adjustable cutting length for efficient processing Fslnswcqzke Hca Ejgb - Hydraulic hold-down devices positioned close to the cutting edge - Foot switch - Central manual cutting gap adjustment - Easy blade replacement and resharpening - Operating instructions in German

Condition: good (used), Year of construction: 2005, laser power: 2,000 W, laser hours: 4,029 h, We offer a generator and a resonator TRUMPF TCF1. These components come from a portal 3D laser Folev Ic Saon Hca Ejgb

Condition: excellent (used), 1 used heavy-duty manual folding machine / folding machine in very good condition Make: TOS Strojarne / UNICORN, Origin Czech Republic Model: XK 2000/2A Technical data: max. bending length 2050 mm Fgsln Hcaouu Sy No Esb max. thickness of bent sheet 2 mm max. bend for ruler pointed 135° max. stroke of the work table 100 mm max. stroke of the upper beam 100 mm Stroke of lower beam 100 mm Dimensions L x W x H 3200 x 720 x 1300 mm Weight of the machine 1650 kg Accessories / special features: - Pointed rail 45° - Bending rail - Stop with degree adjustment Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2025, PLACE OF PRODUCTION : TURKEY WARRANTY PERIOD : 12 MONTHS DELIVERY PERIOD : STOCK 1 Set bending mold in desired size Special design direct drive reducer bending system 4.7” TFT Touch Screen Portable Foot Pedal with Emergency Stop Button 100 program memory 10 bends in each program in succession Hydraulic Clamping Precise bending thanks to braked motor Manual Support Device Miter Device Support Roller Security Locked Electrical Panel and Safety Switch Protection against overload Electricity – 380V/3Ph/50Hz CE certified Fgelnsvy Appe Hca Eeb MAX. OUTER DIAMETER : 32X3MM MAX. BENDING RADIUS: 250MM MAX. TWIST ANGLE : 190 DEGREES HYDRAULIC PRESSURE : 50 - 220 BAR WORKING LENGTH : 2100MM MOTOR POWER : 3.7 KW

Condition: as good as new (ex-display), Year of construction: 2021, Profile Bender Hydraulic 3 Driven Rolls Modell RH 55 horizontal and vertical use - shaft diameter 55 mm - hydraulic adjustment top roll Fjlehri D Rsn Hca Eogb -digital readout - standard rolls - weight 538 kg - motor 7 hp - 400 volt 3 phase - bending capacity - round tube 70x3 mm and 76,1 mm - flat hard way 70x12 mm

Condition: excellent (used), Year of construction: 2012, SAFAN DARLEY E-Brake 150-3100 Working length 3060mm Bending force max. 1500kN HUB 300mm Felnovcyv So Hca Eegb Equipment and technical data see pictures.

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, machine/vehicle number: 12940, pressing force: 50 t, working length: 2,550 mm, stroke distance: 120 mm, TECHNICAL DETAILS Press force: 50 t / 500 kN Motor power: 5.5 kW Axes: Y1, Y2, Z Working area Bending length: 2,550 mm Stroke length: 120 mm Cylinders: 2 Speeds Lowering speed: 100 mm/s Pressing speed: max. 13.5 mm/s Retraction speed: 75 mm/s Fgjln Howcqttsca Eob Hydraulics Oil tank: 100 l MACHINE DETAILS Length: 2,750 mm Width: 1,100 mm Height: 2,050 mm Weight: approx. 3,500 kg EQUIPMENT - Hydraulic tool clamping for the upper tool - Darley system

Condition: refurbished (used), Year of construction: 2006, operating hours: 16,450 h, Functionality: fully functional, machine/vehicle number: 11250, pump pressure: 4 bar, power: 19 kW (25.83 HP), High pressure pump DYNATRONIC 402S Manufacturer: Böhler, BHDT, BFT Year of manufacture: 2006 Operating hours: 16.450 h Used, fully serviced, tested and ready for operation, Maximator JET certificate  Drive power main engine 19 kW  Auxiliary unit oil/air cooler 1.1 kW  Additional unit pre-pressure pump 0.46 kW  Delivery rate 1.9 l/min  Design pressure 420 MPa  Operating pressure, max. 400 MPa  Continuous operating pressure 380 MPa  Pulsation damper 2.5 l  Oil tank volume 120 l  Ambient temperature oil/air cooler 10-35 °C Felnjrcb Eds Hca Eogb  Width x depth x height 1,900 x 970 x 1,520 mm  Weight 1,250 kg  Sound level max. 78 dB(A)  Pressure-, volume flow-controlled drive hydraulics  Oil-air heat exchanger  Pulsation damper  Primary and secondary filter units  Stepless pressure adjustment from 50 to 400 MPa  Plain text display with event list  Pressure relief valve  Water pre-pressure pump  Operating pressure setpoint display  Soundproof housing Price ex Schweinfurt plus VAT 16.500,- € plus - transportation - Training 1 day for up to 4 people in Schweinfurt, optionally at the customer's premises - Installation and assembly Subject to changes and errors in technical data and prices. Subject to prior sale.

Condition: good (used), Year of construction: 2000, Trumpf Trumatic 500 – defective – : Price ex-site: only €6,500 (net) for professional self-dismantling! Manufacturer: Trumpf Model: Trumatic 500 Type: 9089 – No.: 041612 Year of manufacture: 2000 Max. cutting force: 220 kN Power supply: 400 V, 50 Hz Connected load: 19 kVA Supply voltage: 400 V Control voltage: 24 V Required fuse: 3 x 35 A Compressed air connection: 6 bar Fjlowaniaon Hca Esgb Machine weight: 11,500 kg Condition: generally good – but according to the customer, there is a defect in the control system (the exact number may still be determined). Available: immediately Location: 46419 Isselburg

Condition: new, Year of construction: 2025, MAXIMUM CAPACITY: Ø51X3MM MAXIMUM BENDING RADIUS: 250MM BENDING DEGREE: 190 DEGREES WORKING LENGTH: 3000MM Foln Hcsvyzwrja Eegb MOTOR POWER: 13.5 KW BENDING SPEED: CHANGEABLE STANDARD FEATURES A set of bending molds in the dimensions requested by the customer Servo Motorized Progress Axis Servo Motorized Rotation Axis Automatic Emailing of Detailed Work Report Servo Bending Axis (SFB 38-CNC/R1) Reducer Driven Bending System (51-65-76-90) Mobile 21” color screen CNC Control Unit 3D Simulation Bending Daily, Weekly and Monthly Total Production Quantity Display Total material length calculation Estimated bending process time calculation X-Y-Z data Y-B-C conversion Remote assistance Portable foot pedal with emergency stop Manual – Automatic Bending Mandrel – Non-Mandrel Bending Switched Safety Plate behind the bending head Automatic Mandrel lubrication system (SFB 38 CNC/R1) Hydraulic Clamping Hydraulic Mandrel Hydraulic Support Hydraulic Oil Cooler Hydraulic Linear Slider system Hydraulic Collet Electrical panel safety lock and keyed panel lock Electrical Panel Cooler Protected Against Overload

Condition: excellent (used), Year of construction: 1997, Pressure capacity 40 t Folding length 2100 mm Clearance between the uprights 1600 mm Fgeln Hcaju Agk Ho Esb Projection 220 mm Installation height approx. 300 mm Stroke length approx. 100 mm Working height 880 mm Table width 135 mm Stroke rate approx. 9 / min Table width approx. 240 mm Emptying speed approx. 70 mm / s Working speed approx. 13 mm / s Retraction speed approx. 100 mm / s Drive power 5.5 kW Dimensions L x W x H 2400 x 1400 x 2100 mm Weight 3750 kg Accessories / Special features: - As good as new deer foot upper tool, continuous, can be sawn to any length yourself - As good as new universal die with various openings, 70 x 70 x 2100 mm - Motorized plunge depth adjustment with digital display - Manual backgauge approx. 600 mm with SIKO counter - Fast rapid feed and fast retraction - 2-hand operation, combined with foot switch + EMERGENCY STOP - 2 backgauge fingers - Pressure regulation via potentiometer on the control panel - Control panel, swivel-mounted - CE marking Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, Used hydraulic compact press brake model SCT 16.5 – demonstration machine, L=550 16/T Year of manufacture: 2022 Fgsln Hcev Uzwuoa Ejb Pneumatic R-axis on the backgauge 3 units of manual SpeedGrip clamping system Manual WILA/TRUMPF Top Clamping System Table Mount for TRUMPF Substructure for Internal Transfer Support Table with Guide Proportional Valve for Continuous Bending Speed X-Stop Retraction Technical Specifications: Max. Press Force: 160 kN Clearance Between Columns: approx. 400 mm Max. Tool Length: approx. 550 mm Thrust in the Side Columns: approx. 200 mm Infinitely Adjustable Stroke: approx. 170 mm Working Speed: 10 mm/sec Return Stroke Speed: approx. 80 mm/sec Max. Installation Height of Ram and Table: approx. 360 mm Table Length: approx. 550 mm Table Width: 60 mm Drive Power: 1.6 kW Net Weight: approx. 1180 kg Dimensions W x D x H: approx. 820 mm Dimensions D: approx. 850 mm Dimensions H: approx. 1520 mm

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via Fgolsng Ax Sjn Hca Ejb - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: Felsng A R Son Hca Eogb - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: Foln Hsng Amkoca Eegb - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site